Eurotec Innovation Ra11 nakup rabljenega (762)

Stanje: rabljeno, prevoženi kilometri: 133.401 km, moč: 110 kW (149,56 KM), prva registracija: 08/2019, vrsta goriva: dizel, skupna masa: 7.490 kg, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, skupna dolžina: 5.250 mm, skupna širina: 1.700 mm, skupna višina: 2.190 mm, Leto izdelave: 2019, Oprema: ABS, filter saj, klimatska naprava, pogon na vsa štiri kolesa, Kiefer Boki 1152T 6x4 Chassis, 3.0l Diesel Engine, 110 kW/150 hp, Euro 6, with All-Wheel Drive and Air Conditioning in Municipal Orange RAL 2011 – Ready for Immediate Use! ---- First registration: 08/2019 Mileage: 133,401 km Operating hours (vehicle): 5,114 h Previous owner: 1st hand, ex-municipal vehicle ---- * Iveco engine 3.0 FPT F1C, 110 kW/150 hp, EURO 6c, 370 Nm torque, EU6c emission class, diesel particulate filter (DPF), SCR catalytic converter / AdBlue * 10-speed fully synchronized reduction manual transmission * Gross vehicle weight: 7,490 kg (payload: 4,000 kg) * Maximum speed: 90 km/h * Chassis: 6x2, selectable all-wheel drive 6x4 * Front steering * 3rd axle hydraulically steered (hydraulically liftable) * Wheelbase: 2nd axle 2,400 mm / 3rd axle 3,390 mm * Winter tires: 285/65 R16 * Hydraulic / lift systems: 55 – 105 l/min up to 300 bar * 2-circuit hydraulics * Radio * Air conditioning * Heated seat Lredpfevywikox Al Nok * Trailer coupling (ball coupling), trailer load 3,500 kg retrofittable * Selectable all-wheel drive with mechanical differential lock and reduction * Yellow rotating beacon * Driver’s suspension seat with armrest and adjustable passenger seat (ISRI) * Prepared for front mounting plate for quick-change attachments * Hydraulic parking brake ---- The Boki 1152 T stands out with a permissible gross weight of 7.49 tonnes and a width of only 1.70 m. Thanks to the additionally liftable third axle, the Boki 1152 T is as agile as its two-axle counterparts. With a payload of up to four tonnes, a powerful 150 hp engine and a maximum speed of up to 90 km/h, virtually no wish is left unfulfilled. The innovative vehicle concept allows optimal use both as a transport vehicle and as a work machine. Multifunctional operation is ensured by the powerful hydraulic system and a wide range of body options. Immediately roadworthy and ready-to-use vehicle from first owner, in good and well-maintained condition! Previously used by municipal cleaning services as a refuse collector with compactor body, therefore not used for winter service – no rust present! New general inspection (TÜV) and maintenance check upon delivery! ---- Contact person for this vehicle: Daniel Seidler Tel: Mobile: (also WhatsApp) Email: Subject to errors and prior sale!

Stanje: novo, Leto izdelave: 2026, The LUFT screw compressor represents state-of-the-art solutions in pneumatics, combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, as well as high device efficiency, guarantee effective and trouble-free operation. The LUFT 1000 stands out with its direct drive, resulting in significantly improved efficiency and reduced power losses compared to belt-driven models. This innovative solution ensures optimal use of motor power, delivering higher output while keeping energy consumption low. The maximum pressure generated by this screw compressor is 10 bar. Complete control over the unit's operating parameters is provided by the intuitive MAM series electronic control panel, giving you access to key compressor information and increasing flexibility and process control. Ledpfxoy E Hpco Al Njrk Technical specifications Motor power: 7.5 kW Voltage: 400V/50Hz Capacity 0-6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Outlet connection diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 160 kg

Stanje: novo, Leto izdelave: 2026, LUFT screw compressor represents the latest solutions in pneumatics, combining the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust design, and high efficiency ensure reliable and trouble-free performance. CORMAK Screw Compressors: When you expect the highest quality and performance! Are you looking for solutions that exceed industry standards? CORMAK screw compressors are synonymous with innovation and reliability, engineered for the most demanding applications. - Innovative design: Our compressors are based on advanced engineering and European manufacturing precision. The solid construction, complemented by modern components, guarantees long-lasting, trouble-free operation under any conditions. - Quiet operation and comfort: Designed with careful attention to detail, our compressors offer exceptionally low noise levels. Effective sound-damping and vibration-reduction systems ensure a comfortable working environment, enhancing operator focus and well-being. - Intelligent control: The intuitive MAM electronic control panel is the command center for your compressor. It enables precise parameter monitoring, maintenance scheduling, and rapid diagnostics, ensuring stability and protection of key components. - Customization: We understand every application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing for a perfect fit with the specific needs of your industry. - Dynamic working pressure: Automatic pressure regulation ensures the compressor provides precisely as much compressed air as needed at any given time, maximizing energy efficiency and minimizing losses. - Sustainable development: We prioritize environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your costs, but also minimize environmental impact, and the heat recovery option allows for optimal energy utilization. CORMAK: Technology that drives your success! Technical specifications Motor power: 5.5 kW Lsdpfx Aemqlguol Nork Voltage: 400V/50Hz Output at 0-6 bar: 690 L/min Output at 6 bar: 650 L/min Output at 8 bar: 650 L/min Output at 10 bar: 630 L/min Outlet port diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 120 kg Manufacturer: Cormak

Stanje: novo, Leto izdelave: 2026, LUFT 1000 Screw Compressor with Inverter is a state-of-the-art solution for pneumatic applications, integrating premium-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, and high performance ensure efficient and trouble-free operation. Main advantages of 7.5 kW induction motor with frequency inverter: - Significant energy savings: The inverter allows for smooth and precise speed control of the induction motor. The compressor output is adjusted exactly to the current demand for compressed air, eliminating idle running (where the motor operates but does not produce air), frequent start/stop cycles, and energy losses from blowing off excess air. Depending on the air consumption profile in your facility, energy savings may range from 25% up to 50%. The more variable the air demand, the higher the savings. - Stable system pressure: Continuous speed regulation with the inverter maintains a nearly constant pressure in the compressed air network, regardless of demand fluctuations. This is crucial for the proper functioning of pneumatic tools and machinery, prevents pressure spikes, and increases process precision. - Reduced inrush currents and electrical load: The induction motor started via the inverter starts smoothly and gradually, eliminating high inrush currents that can load the electrical network and cause voltage drops. This protects the electrical infrastructure and reduces the risk of disturbances. - Extended component lifespan: Smooth operation without sudden starts or stops significantly reduces mechanical stress on the screw block, bearings, coupling, and the motor itself. This results in a longer compressor lifespan and lower service and spare parts costs. - Quieter operation: When operating at lower speeds (with lower demand), the compressor generates less noise, improving acoustic comfort in the workplace—a significant benefit for operators and the surrounding environment. - Greater flexibility and adaptability: The inverter-equipped compressor efficiently handles a wide range of compressed air demand, making it perfect for companies with fluctuating air consumption throughout the day, week, or month. - Advanced control and diagnostics: The inverter integrates with modern control panels, providing extensive parameters monitoring, error diagnostics, remote control, and maintenance scheduling. This gives users full control and system optimization for compressed air. Technical specifications Motor power: 7.5 kW Lrodpemqlhvefx Al Nek Voltage: 400V/50Hz Capacity 0–6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Outlet diameter (G): 1/2" Dimensions: 810 x 610 x 850 mm Weight: 160 kg

Stanje: novo, Leto izdelave: 2026, LUFT 1000 COMPACT Screw Compressor with integrated refrigerated compressed air dryer. The CORMAK LUFT series screw compressor, manufactured by a renowned Polish brand, utilizes state-of-the-art solutions in pneumatics, combined with high-quality materials and components. Its low operating costs, ease of use, ergonomic and robust design, and high efficiency ensure effective and trouble-free operation. • Innovative design: Our compressors are built upon advanced engineering and European precision workmanship. The sturdy construction, enhanced with modern components, ensures long-lasting and trouble-free operation in any conditions. • Integrated refrigerated dryer: The COMPACT version with an integrated dryer is a space-saving and comprehensive solution in a single unit. The built-in refrigerated air dryer guarantees dry, clean air, protecting your installation against corrosion and damage. • Quiet operation & comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Advanced noise suppression and vibration reduction systems provide a comfortable working environment, improving operator focus and well-being. • Intelligent control: The intuitive MAM series electronic control panel serves as your compressor’s command center. It provides precise parameter monitoring, service scheduling, and rapid diagnostics to assure the stability and protection of critical components. • Application adaptation: We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems for perfect alignment with industry-specific demands. • Dynamic working pressure: Automatic pressure adjustment ensures your compressor delivers exactly the required amount of compressed air at any moment, maximizing energy efficiency and minimizing losses. • Sustainable development: We focus on environmentally friendly solutions. The energy-saving technologies integrated into our compressors reduce your costs and environmental impact, while the heat recovery option allows maximum energy utilization. Integrated refrigerated air dryer – highest air quality • Two-stage drying system: Ensures effective moisture removal and protects your pneumatic installation. • Variable speed fan: Automatically adjusts cooling performance to working conditions, saving energy. Lrjdpfx Aljxmg A Ao Nok • Dual filtration system: 3.0 μm pre-filter removes larger solid contaminants, while a 0.1 μm precision filter captures fine oil particles (aerosols) and other impurities, ensuring the highest air purity. Technical specifications: Motor power: 7.5 kW Voltage: 400V/50Hz Capacity 0-6 bar: 990 L/min Capacity at 6 bar: 950 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 930 L/min Outlet connection diameter (G): 3/4” Dimensions: 1320 x 650 x 945 mm Weight: 320 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Confectionery workshop or small pastry shop? For sale: Bravo 183 Executive combined gelato machine in excellent condition. Cooker and blast freezer in one, with numerous factory programs (cream and jam cooking, chocolate tempering, choux pastry preparation, cream cooling, glaze making, macaron meringue, etc.). Trittico® Executive 183 Combined machine with ionic-system and double inverter for pastry, chocolate, savoury products and gelato Lrjdpfx Ajyi H Npol Nek water cooled Absolute Creative Freedom Trittico® Executive is the first and only all-in-one lab enclosed in a single machine: more than 40 years of innovation packed into less than 10 square feet. Trittico® Executive embodies the unique synergy of traditional expertise, craftsmanship, and cutting-edge technology. Perfect for high-end pastry, chocolate, premium gelato, and top-tier international cuisine. Technical features · Ingredients can be added during any heating or freezing phase · Double inverter: upper tank stirrer with 3 speeds, batch-freezer mixer with 8 speeds · Sheathed resistance heating system: ultra-fast heating, no thermal hysteresis, precise temperature control, prevents product scorching · Patented ionic® System control: detects exact percentage of frozen water in the mix for optimum gelato/sorbet texture and overrun · Thermal shock with rapid temperature drop from 85°C to 4°C: ensures maximum product sanitization and mix hygiene · Software preloaded with multiple recipes · Chute for direct product extraction Advantages and key benefits · Very easy and convenient loading · Variable mixing speeds (automatic or manual) · Fast wash-down process · Maximum hygiene · Extremely user-friendly and easy to clean

Stanje: novo, Condition new Delivery time approx. 2-4 weeks from order Country of origin: Poland Price: €1,595 Drilling capacity in structural steel: 23 mm Shank: 19 mm Weldon Motor power: 1.6 kW Lrodpeyrht Ijfx Al Nok Thread-cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 500 mm Weight: 17 kg Maximum drilling capacity: 23 mm Maximum annular cutter capacity: 50 mm Maximum cutting depth: 75 mm Stroke: 190 mm Motor speed: 160-250 / 390-580 rpm Minimum workpiece thickness: 8 mm The PRO-52T magnetic drill is designed for hole cutting and thread cutting operations. Its powerful motor with variable speed enables milling up to 50 mm and drilling up to 23 mm. Both forward and reverse operation, together with the new Promotech threading system, allow thread cutting up to M20. The two-speed gearbox with stepless speed adjustment enables optimal speed settings based on diameter, steel grade, or tool quality. The intelligent speed control system maintains constant motor speed regardless of changing loads. The innovative 360-degree LED indicator assists with proper machine operation and enhances workplace safety. Features and Benefits: • Powerful motor with robust 2-speed gearbox • Electronic Speed Stabilization System (ESSS) maintains consistent speed regardless of load changes • Capable of tapping through and blind holes • Milling with carbide or HSS cutters, or drilling • Electronic clutch • Overload and overheat protection • Rigid construction extends tool life • Tilt sensor stops the motor if the machine tips • 360-degree status monitoring system displays the drill’s condition and provides safety and diagnostic information, e.g. worn brushes • Innovative smart magnet with reduced weight • Magnetic Field Shape Control (MFSC) ensures maximum holding force on thin materials • Energy Saving Base (ESB) consumes only 50% power when the motor is idle • Semi-automatic wedge adjustment allows easy, quick, precise and reproducible guidance setting without specialist knowledge or experience • Intuitive control panel at the top of the drill • Large coolant tank Standard delivery set: • Drilling machine • Plastic case • Handles (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 6 mm Allen key • 5 mm Allen key with handle • 2.5 mm Allen key • 8 mm open-end wrench • Tool box • User manual OPTIONS (PRICES ON REQUEST): Pressure cooling system 2 ltr Vacuum pad Pneumatic ejector Pipe fastening

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1995 Drilling capacity in structural steel: 25 mm Tool holder: 19 mm Weldon Motor power: 1.6 kW Thread cutting capacity: M20 Length: 266 mm Width: 259 mm Height: 505 mm Weight: 18 kg Max. drilling capacity: 25 mm Max. annular cutter capacity: 70 mm Lrsdpfx Alsyrhrws Nek Max. cutting depth: 75 mm Stroke: 190 mm Motor speed: 120-190 / 290-450 rpm Min. workpiece thickness: 8 mm The PRO-72T magnetic drilling machine is suitable for drilling and thread cutting. The powerful motor with variable speed allows milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to the clockwise and counterclockwise rotation, threads up to M20 can be cut with the new threading system from Promotech. The two-speed gearbox with stepless speed adjustment enables the optimal setting depending on hole diameter, steel grade, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display simplifies operation and increases operator safety. Features and benefits: • Powerful motor with robust 2-speed gearbox • Electronic speed stabilization system (ESSS) for constant RPM regardless of load changes • Thread cutting in through and blind holes • Milling with carbide or HSS cutters as well as drilling • Electronic clutch • Overload and overheat protection • Sturdy design for longer tool life • Tilt sensor stops the motor in case of machine breakaway • 360° visualization indicates current machine status and provides safety and diagnostic information, e.g., worn carbon brushes • Innovative, lightweight smart magnet • Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials • Energy-saving base (ESB) consumes only 50% power in standby • Semi-automatic spline adjustment for easy, fast, precise, and repeatable guide clearance setting without expertise • Intuitive control panel at the top of the drilling machine • Large coolant tank Standard scope of supply: • Magnetic drilling machine • Plastic case • Handles (3 pieces) • MK3 arbor with 19 mm (3/4") Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 5-mm T-handle hex key • 4-mm hex key • 2.5-mm hex key • 8-mm combination wrench • Operating manual OPTIONS (PRICES ON REQUEST): Pressure cooling system Pipe attachment

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1,695 Drilling capacity in structural steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.45 kW Length: 316 mm Width: 235 mm Lrodpfx Aloyrhqte Njk Height: 328 mm Weight: 11.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm The PRO-36 Battery is a magnetic drilling machine designed for drilling holes up to 36 mm in diameter using annular cutters. The machine can also drill holes of up to 12 mm in diameter when using twist drills. The cordless drilling machine is equipped with an LED monitoring system that displays signals in green and red to indicate the current machine status and provide safety information. The control panel features “vandal-resistant” illuminated start/stop switches (green/red). Features and benefits: • LED monitoring system indicates the current machine status and provides safety information • The LED monitoring system flashes green if insufficient adhesion is detected, e.g. caused by a gap or workpieces that are too thin • The double guide system ensures exceptional precision and maintenance-free operation • Overload protection • Magnetic field sensor automatically stops the motor when holding force is insufficient • Magnetic Field Shape Control (MFSC) provides maximum holding strength, even on thin materials • The Energy Saving Base (ESB) consumes only 50% of its power when the motor is not running • Innovative intelligent magnet with reduced weight Standard delivery package: • Cordless drilling machine • Plastic case • 4.0 Ah battery • Handle (3 pcs) • Safety strap • Cooling system • 4 mm Allen key with handle • User manual OPTIONS (PRICES ON REQUEST): • Charger • Pipe attachment • Pressure cooling system • Vacuum pad • Vacuum pump • Pneumatic ejector

Stanje: novo, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Price: €995 Drilling capacity in structural steel: 23 mm Holder: 19 mm Weldon Motor power: 1.15 kW Length: 331 mm Width: 254 mm Height: 456 mm Weight: 15.5 kg Max. drilling capacity: 23 mm Max. annular cutter capacity: 50 mm Max. cutting depth: 50 mm Stroke: 160 mm Motor speed: 240 / 480 rpm Min. workpiece thickness: 6 mm The PRO-50, equipped with a specially developed motor and a 2-speed gearbox (240/480 rpm), is optimized to provide optimal speed for working with HSS cutters up to Ø 45 mm and twist drills up to Ø 23 mm. The rigid construction, optimized through FEA software (Finite Element Analysis), extends tool life and enables a cutting depth of up to 75 mm. Its compact design and innovative, intelligent magnet with reduced weight make the machine extremely lightweight. The PRO-50 delivers maximum holding force on thin materials thanks to magnetic field shape control (MFSC). Both the drill and operator are protected when working on thin workpieces by the magnetic force adhesion control module (MPAC). Additionally, the PRO-50 features an Energy Saving Base (ESB) that consumes only 50% of its power when the motor is off. Features and benefits: • Compact construction with excellent weight-to-performance ratio • Specially developed motor • Motor speeds: 240/480 rpm (under load) • Spindle with MT2 taper • Innovative, intelligent magnet with reduced weight • Rigid construction extends tool service life • Large stroke allows use of long tools • Motor cable with additional protective cover • Magnetic field shape control (MFSC) provides maximum holding force on thin materials • Magnetic force adhesion control module (MPAC) monitors the holding force of the electromagnetic base and protects both operator and machine when working on thin workpieces • Energy Saving Base (ESB) uses only 50% power when the motor is not running Standard delivery set: • Magnetic drilling machine • Plastic carrying case • Handle (3 pcs) • MT2 arbor with 19 mm (3/4”) Weldon tool holder • Safety strap • Cooling system • Protective spring for coolant hose • MT2 drift • 2.5 mm Allen key • 5 mm Allen key Ledpfxeyrhp No Al Nork • 5 mm Allen key with grip • 8 mm combination wrench • Operating manual Options (prices on request): • Pipe attachment • Pressure cooling system • Vacuum pad • Vacuum pump • Pneumatic ejector

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Ohne, The Solarfold PV container is an innovative, mobile photovoltaic solution for flexible power generation exactly where energy is needed. The complete solar power plant is housed in a 20-foot high-cube container and can be set up and commissioned on site within a short time. With an installed capacity of up to 130 kWp and a total of 196 PV modules, the Solarfold offers a powerful, scalable solution for temporary or mobile energy supply. The system comes fully pre-configured and pre-wired. Thanks to the innovative aluminum rail system and mobile ground anchors, installation can be carried out without extensive foundation works or cable trenches. This makes Solarfold particularly suitable for projects with frequently changing locations. Technical data: - Nominal capacity: up to 130 kWp - PV modules: 196 units - Container: 20’ HC (High Cube) - Transport weight: approx. 13.5 t - Module surface in operation: approx. 6 m × 123 m - Integrated inverter Lrodpfxeytblyo Al Nok - Modules fully pre-wired - Quick to assemble and dismantle Advantages - Mobile power generation for flexible deployment - No soil sealing or cable trenches required - High energy yields and short payback period - Transportable by truck, rail, or ship Typical applications: - Construction sites and infrastructure projects - Agriculture - Industry and commerce - Events and festivals - Charging infrastructure for e-mobility - Temporary power supply or off-grid applications The Solarfold enables sustainable, cost-effective, and flexible power production, and can also be combined with battery storage systems depending on project requirements.

Stanje: novo, Leto izdelave: 2026, The Q12E30 Electric Mast Stacker is the ideal machine for loading and unloading goods. With a lifting capacity of 1200 kg and electric lifting up to 3 meters, it allows for efficient and safe stacking of materials. The truck is equipped as standard with two driving modes: a fast mode and a turtle mode, which allows for precise maneuvering. Key Features of the Q12E30 Stacker: The Q12E30 electric mast stacker is a technologically advanced solution, yet extremely easy to operate. As standard, it features integrated safety functions such as an emergency stop switch and overload valves. The high-lift mast stacker is constructed from top-quality materials, ensuring rigidity and stability during lifting and transport operations. It comes with a built-in LED battery charge indicator, as well as an integrated charger and rectifier. At its core are sealed, maintenance-free AGM batteries, delivering both reliability and enhanced performance. During the warranty period, no periodic inspections are required to maintain warranty coverage, significantly simplifying maintenance and reducing costs. By delivering equipment of the highest quality and efficiency, we prioritize innovation and customer satisfaction. The Q12E30 stacker exemplifies advanced technology that simultaneously enhances workplace safety and accelerates warehouse processes. The wheels and rollers are made from highly durable, abrasion-resistant polyurethane, ensuring exceptionally long service life and increased resistance to mechanical damage. Technical Specifications: MAX LIFTING HEIGHT: 3000 mm LIFTING CAPACITY: 1200 kg LOAD CENTER: 600 mm FORK LENGTH: 1150 mm FORK OUTER WIDTH: 550 mm Lrodpfxerh Ey Ue Al Nek HEIGHT WITH LOWERED FORKS: 2080 mm HEIGHT WITH EXTENDED MAST: 3550 mm LOWERED FORK HEIGHT: 85 mm OVERALL WIDTH: 800 mm OVERALL LENGTH: 1800 mm GROUND CLEARANCE: 30 mm TURNING RADIUS: 1390 mm TRAVEL SPEED LOADED/UNLOADED: 3.5/4 km/h LIFTING SPEED LOADED/UNLOADED: 100/200 mm/s LOWERING SPEED LOADED/UNLOADED: 120/100 mm/s GRADEABILITY LOADED/UNLOADED: 3/10% SERVICE BRAKE TYPE: Electromagnetic DRIVE MOTOR POWER: 0.75 kW LIFT SYSTEM MOTOR POWER: 2.2 kW BATTERY VOLTAGE / CAPACITY: 12V 85Ah (2 units) WHEEL MATERIAL: Polyurethane WEIGHT: 460 kg

Stanje: novo, Leto izdelave: 2026, Electric stacker truck with a lifting capacity of 1500 kg and a lifting height of 3500 mm is the ideal warehouse device for transporting heavy loads. Its robust steel construction ensures stability during lifting operations. Polyurethane rollers facilitate movement over uneven surfaces. Thanks to these features, the stacker enables quick and safe handling of loads at different levels and in various working conditions. Introduction to Electric Pallet Stacker Trucks The CORMAK Q15E35 electric stacker forklift is a versatile and efficient solution for material handling and lifting tasks up to 3.5 m. Featuring innovative design and advanced technology, this stacker is perfectly suited for use in warehouses, production facilities, and distribution centers. Key Advantages of the 1500 kg Electric Pallet Stacker The technical parameters of this model include the ability to lift to an impressive height of 3500 mm, enabling effective material handling at various levels. With a load capacity of 1500 kg, it is the optimal tool for managing medium and heavier loads. Lodpfxsrh E D Uj Al Njrk Machine Features Robust frame made of high-quality steel for increased rigidity and stability during lifting. Pallet truck handle, featuring a special system, transmits steering directly to the wheel. Built-in battery charger. Fork lifting to maximum height without load – just 25 seconds! Maintenance-free, brushless technology drive motor. Battery charge indicator on the control box. Emergency safety switch. Integrated controller protecting the battery from over-discharge or damage. Sealed, maintenance-free AGM battery. NO mandatory service checks required during the warranty period. Technical Specifications MAX LIFTING HEIGHT: 3500 mm LOAD CAPACITY: 1500 kg CENTER OF GRAVITY: 600 mm FORK LENGTH: 1150 mm FORK OUTER WIDTH: 570 mm HEIGHT WITH LOWERED FORKS: 2330 mm HEIGHT WITH EXTENDED MAST: 4000 mm HEIGHT OF LOWERED FORKS: 85 mm OVERALL WIDTH: 810 mm OVERALL LENGTH: 1745 mm GROUND CLEARANCE: 30 mm TURNING RADIUS: 1390 mm TRAVEL SPEED WITH/WITHOUT LOAD: 3.5 / 4 km/h LIFTING SPEED WITH/WITHOUT LOAD: 140 / 200 mm/s LOWERING SPEED WITH/WITHOUT LOAD: 120 / 100 mm/s GRADEABILITY WITH/WITHOUT LOAD: 5 / 7% SERVICE BRAKE TYPE: Electromagnetic DRIVE MOTOR POWER: 0.75 kW LIFT MOTOR POWER: 2 kW BATTERY VOLTAGE / CAPACITY: 12V 75 & 120 Ah WHEEL MATERIAL: Polyurethane WEIGHT: 586 kg

Stanje: novo, Leto izdelave: 2026, PREMIUM VERSION MODELS ARE CHARACTERISED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, OPERATING WITH FULL INTERPOLATION ON EACH X, Y, AND Z AXIS. The machine comes with an "Innovation Opinion" certificate, which facilitates financing the purchase with EU funds. Digital Signal Processing. The plotter with a working area of 1220x1230 ensures smooth operation and high machining accuracy. The controller’s built-in memory allows the machine to operate without the need to upload the program each time. The spindle construction incorporates high-quality machine bearings, ensuring exceptionally quiet operation and increased durability. The Premium version meets the expectations of both individual users and companies with a high workload. Training for each machine is included in the price at our headquarters! Technical parameters: Spindle: 3.7kW / 18,000 rpm, inverter, air-cooled Working area: 1230x1220x210 mm Control: DSP Software resolution: 0.001 mm Power supply: 400V Weight: 450 kg Machine dimensions: 2000x1800x1640 mm Table height: 715 mm Linear guides Drive transmission: rack and pinion (Z axis – ball screw) ATTENTION! The machine is equipped with a function that memorises the last G-code path. In case of a failure or power interruption, it resumes operation from the last point, saving time and material. Equipment included: - Levelling feet - Hose Ledpfx Aleiz Avve Nsrk - Clamping brackets - Screws - Wrenches - 2 boxes of cutters - Collets 1/8, 1/2, and 5-6 mm For more information, please contact us.

Stanje: novo, Leto izdelave: 2026, BAND SAW CORMAK BS912N Specification: - The material to be cut can be fed manually or by any mechanical device, while the saw feed is fully automatic. - The descent speed of the arm is controlled by a hydraulic cylinder. The appropriate descent speed is achieved using a valve that regulates the oil flow between the cylinders' chambers. Ljdpfx Asy En E Ssl Nerk - The desired linear speed of the blade is achieved by changing the gear ratio on the pulleys located between the worm gearbox and the drive motor. The coolant tank with an electric pump is situated in the machine base. - Precision and robust build quality place this machine at the top of band saws in its class, with a large cutting capacity of 230 mm and the ability to cut at any angle from 0 to 45 degrees. - The CORMAK BS912N band saw, thanks to innovative improvements and the use of bimetallic blades from a renowned manufacturer, is widely used in all metalworking shops where precision, quality, accuracy, and speed of cutting are crucial. - Cutting angle is set using a swiveling vise, within a range of 0 - 45°. - The solid vise walls are made of durable cast iron. A protractor scale is located at the rear of the vise for convenient and quick angle adjustment. - Both blade guides are equipped with a cooling system that supplies coolant to both the blade and the workpiece. - This model is equipped with a convenient handle for blade tensioning and a quick clamp for the vise (workpiece). - On the machine arm, there is a blade tension indicator, along with a table for selecting blade pitch and cutting speed depending on the type of steel being cut. - In the lower arm position (once the material is cut), the drive of the cutting blade is automatically switched off by a new generation limit switch. - Safety during operation is ensured by an electrical installation compliant with all CE requirements. The machine has a limit switch stopping the machine at the end of the cutting process, an emergency stop (safety mushroom), and a series of micro-switches that deactivate the machine in case, for example, the belt or blade cover is opened. - Additionally, our machine model is equipped with a wire brush that cleans the cutting blade of chips—this prevents the blade from clogging and increases cutting efficiency. - The blade guides are equipped with special carbide plates and bearings, which significantly influence blade guidance, its service life, straightness, cutting accuracy, and quality. - Carbide guidance significantly limits the wear of both the machine and the blade itself! - The arm is made of profiled ductile cast iron, which ensures rigidity during operation and absorbs all types of vibrations. - The control panel is located on the saw arm. Technical Data Motor: 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Blade dimensions: 2655x27x0.9 mm Blade speeds: 24/36/49/71 m/min Cutting angle range: 0 to +45 degrees Machine packaging dimensions: 1420x500x1150 mm Weight: 151/202 kg ENGLISH MANUAL

Stanje: novo, Leto izdelave: 2026, The CORMAK PT265T Planer-Thicknesser is a professional jointer-thicknesser designed for intensive and precise machining of solid wood and wood-based materials. The new version of this machine features an innovative system of connected tables, which significantly increases work efficiency and eliminates setup errors typical of older solutions. With a 2.6 kW motor and robust construction, the PT265T is a reliable tool for carpenters, craftsmen, and production workshops. Key machine advantages: - New connected table system – consistent calibration of infeed and outfeed tables eliminates errors and increases precision. - Stable, cast iron construction – 170 kg net weight minimizes vibration and increases safety. - Total motor power S6: 2.6 kW – ensures smooth and efficient processing of hardwoods. - Unique Benefit: Feed Rollers on the Thicknesser – Specially designed roller extensions integrated into the thicknesser table support machining of long and heavy materials, simplifying material entry and exit, and improving finish quality. - Simple conversion from jointer to thicknesser – quick mode switching reduces operation time. - Three HSS knives – precise cutting and high-quality machined surfaces. - Jointer with 265 mm working width – large working area allows machining of wide components. Construction and technology: The CORMARK PT265T is a modern thickness planer built on a heavy-duty, reinforced frame with cast-iron elements. The work tables are ground and properly balanced to ensure repeatability and accuracy. The new table system allows for synchronous height adjustment—once set, the table's level does not require recalibration when changing planing thickness. The central placement of the thicknesser table on the column ensures even material feed without deviations. Rubber feet further eliminate vibrations, increasing component longevity and machining quality. With a 2.6 kW (S6) motor, the machine provides high efficiency while maintaining stable parameters, even when processing hardwood species. The 75 mm knife shaft, with three knives rotating at 4000 rpm, ensures an exceptionally smooth surface finish. The precise measurement scale enables accurate table height adjustment. The aluminum tilting fence (700 x 150 mm) with an adjustable angle from 90° to 45° allows precise alignment of material at various angles. Lsdpfx Aoy El R Eel Njrk Standard equipment: - Knife shaft with three HSS knives - Aluminum fence 700 x 150 mm - Calibrated hand wheel for table height adjustment - Cutter shaft guard - Integrated Ø100 mm extraction port - Anti-vibration rubber feet Technical data: - Knife shaft diameter [mm]: 75 - Knife shaft speed [rpm]: 4000 - Extraction port diameter [mm]: 100 - Fence tilting angle [°]: 90 – 45 - Number of knives: 3 - Shaft length [mm]: 262 - Knife dimensions [mm]: 250 x 25 x 3 - Maximum jointer width [mm]: 265 - Maximum thicknesser width [mm]: 265 - Maximum planing height [mm]: 180 - Max. thicknessing cutting depth [mm]: 3 - Max. surfacing cutting depth [mm]: 2.5 - Thicknesser feed speed [m/min]: 6 - Fence dimensions [mm]: 700 x 150 - Machine dimensions (L x W x H) [mm]: 1080 x 269 x 1000 - Weight [kg]: 170 - Total motor power: S6: 2.6 kW - Power supply: 400V

Stanje: novo, Leto izdelave: 2026, The Cormak PT265 Planer-Thicknesser is a robust, well-designed machine offering extensive adjustment capability and mechanical processing of both hard and soft wood. Adjustment is straightforward, and switching from planer to thicknesser mode takes just a few seconds. Latest machine version features an innovative table opening system: ❌ Competing, older machines use "butterfly-style" tables, which require calibration of both infeed and outfeed tables before each use. Even minimal discrepancies can cause material damage and unwanted results. Ljdpfxovxhzne Al Nerk ✔️ The new, combined table design enables simultaneous, precise adjustment of both tables! Once set, the calibration is permanent. When changing the planing height, both tables move together. ✔️ This translates to time savings, improved ease of use, and 30% higher planing accuracy compared to the previous generation—particularly important when working with thinner materials. Vibration-resistant, stable construction Weighing in at 170 kg and equipped with wide, ground cast iron tables (265 mm), the PT265 ensures excellent stability and safe operation. Additional rubber feet further minimize vibrations during use. VERSION with powerful total motor output S6: 2.6kW The PT265 stands out for its exceptionally strong S6 2.6 kW (S1 2.2 kW) motor—far more powerful than competitors, providing higher efficiency and operational stability. A more powerful motor guarantees smooth performance and easy processing of hard woods, which require greater force—something this machine handles trouble-free. Effortless changeover from jointer to thicknesser. Transition from jointer to thicknesser mode is fast and simple: unlock the eccentric cams, lift the tables, and reposition the chip extraction hood. Work precision. - Smooth, graduated table height adjustment. - Thicknesser table centrally mounted on a column, height adjusted via hand crank. - 700x150 mm aluminum tilting fence with graduated scale, adjustable from 90° to 45°. Technical specifications: Cutter block diameter [mm]: 75 Cutter block speed [rpm]: 4000 Dust extraction port diameter [mm]: 100 Tilting fence angle [°]: 0 - 45 Number of knives: 3 Cutter block length [mm]: 262 Knife dimensions [mm]: 2500x300x30 Max. planing width [mm]: 265 Max. thicknessing width [mm]: 265 Max. planing height [mm]: 180 Max. thicknessing depth [mm]: 3 Max. planing depth [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimensions [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power: S6: 2.6 kW Power supply: 400V

Stanje: novo, Leto izdelave: 2026, VERSION with the most powerful S6 engine with a total power output of 2.6 kW. A more powerful motor ensures stable operation and ease of processing hard materials: Hard wood requires more force to process. The powerful motor can handle this with no problem. Latest machine version with an innovative table opening system: - Competing machines of the old type are equipped with "butterfly" tables. Before each start of operation, it is necessary to calibrate the infeed and outfeed tables with respect to each other. Even minor differences between them lead to material damage, resulting in undesirable effects. - The new solution with combined tables allows for precise adjustment of both tables at the same time! Once adjusted, the tables remain permanently calibrated. When changing planing height, both tables move simultaneously. - This solution not only saves time, provides more convenient operation, but also increases planing precision by 30% compared to the old system. This is especially important when working with thinner materials. Effortless conversion from jointer to thickness planer. Switching between jointer and thickness planer mode is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the chip extraction hood. Precision of work: - Stepless height adjustment of tables with scale. - Centralized thickness planing table mounted on a column with a handwheel for up and down adjustment. - Aluminium tilting fence (700x150 mm) with a scale allowing for precise angle setting between 90-45 degrees. Technical specifications: Cutterhead diameter: 75 mm Cutterhead speed: 4000 rpm Extraction port diameter: 100 mm Fence tilt angle: 90–45° Number of knives: 3 Cutterhead length: 250 mm Knife dimensions: 250x30x3 mm Maximum jointer width: 250 mm Maximum thicknesser width: 250 mm Maximum planing height: 180 mm Maximum thicknessing depth of cut: 3 mm Maximum jointing depth of cut: 2.5 mm Thicknesser feed speed: 6 m/min Fence dimensions: 700 x 150 mm Machine dimensions (L x W): 1080 x 269 mm Weight: 175 kg Total motor power: S1: 2.2 kW, S6: 2.6 kW Power supply: 400V Ledpfx Alovxh A Se Nerk

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 25 kW (33,99 KM), vrsta goriva: električni, lastna masa: 2.550 kg, največja dovoljena obremenitev: 3.000 kg, skupna masa: 2.550 kg, konfiguracija osi: 4x4, barva: rumena, vrsta prenosa: samodejen, Leto izdelave: 2022, obratovalne ure: 7 h, prostornina žlice: 1,47 m³, Oprema: UVV varnostni pregled, dodatne luči, kabina, pogon na vsa štiri kolesa, spojka prikolice, zapora diferenciala, === MAIN SPECIFICATIONS === Lodpfx Ajxr Nmnjl Nerk Year of manufacture: 2022 Operating hours: 10 h Operating weight: 2,550 kg Payload: 3,000 kg Bucket capacity: 1.47 m³ (heaped: 1.92 yd³) Drive: Electric (asynchronous motor, 80 V) All-wheel drive: Yes Differential lock: Yes (electronically controlled) Quick coupler: No Cab: Open with rotating seat Heated cab: No Air conditioning: No Tyres: 10.0/75–15.3 (agricultural tractor tread, pneumatic) Engine manufacturer: Bergmann / asynchronous electric motor Engine power: 25 kW (33.5 hp) Emissions class: Zero emission (electric) Hydraulic output: 8.0 kW (approx. 15 l/min) CE certification: Yes === HIGHLIGHTS === 100% emission-free electric drive with lithium iron phosphate battery (16–24 kWh) Outstanding maneuverability thanks to all-wheel steering Rotating driver's seat for quick change of driving direction Regenerative braking system for energy recovery Low-maintenance, quiet, and cost-efficient in operation CE certified and ready for immediate use === CONDITION === Machine in excellent condition; only 10 operating hours. Fully inspected, tested, and ready for immediate use. Viewing upon request possible. === LOCATION & DELIVERY === Location: Sittard, Netherlands. Worldwide shipping available. 💰 Price: €39,500 (EXW, excluding VAT) The Bergmann C804e is an innovative, fully electric dumper with a payload of 4 tonnes. Thanks to its emission-free drive, rotating seat, and all-wheel steering, it provides maximum efficiency and safety on any construction site. Ideal for use in cities, tunnels, and environmental zones. CE certified, low-maintenance, and immediately available from Collé Rental & Sales stock. === DELIVERY === Crane loading available on request for smooth shipping. Flexible delivery options tailored to your destination and logistics requirements. All transport is professionally handled by the Collé Rental & Sales logistics team.

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. Ljdowf Rgrspfx Al Nerk In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Lrodpfjwf Rg Eex Al Nok Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Lrjdpfx Ajwf Rgxol Nsk Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23

Stanje: novo, Leto izdelave: 2026, MULTIFUNCTIONAL, efficient, and specially adapted CNC milling machine for processing all types of stone, enabling the production of tombstones, as well as a precise CNC router designed for machining wooden materials, chipboard, MDF, OSB, plywood, or synthetic materials such as PVC, plexiglass, and dibond. The frame is constructed from steel and cast iron, ensuring optimal rigidity and resistance to overload during operation. Each machine includes training at our headquarters in the price! Machine description PREMIUM VERSION FEATURES MAXIMUM RIGIDITY AND HIGHEST RESOLUTION PRECISION, OPERATING WITH FULL INTERPOLATION ON ALL AXES X, Y, Z. Ljdpsi Ab Akofx Al Njrk The machine has an “Innovation Opinion” which facilitates obtaining EU funding for purchase. Tool height sensor Double-ventilated dual control cabinet Reinforced frame Water table with material cooling Reinforced guide rollers for easier loading and unloading of workpieces Applications: Tombstone production (all types of stone, ceramics, glass, granite, marble, etc.) Bas reliefs on stone, engraving, milling, etc. (nesting, milling, drilling, cutting) Wood materials, chipboard, MDF, OSB, plywood, and synthetic materials (PVC, plexiglass, dibond) Technical specifications Working area: 1300x2500 (1500x3000 mm) Z axis: 400 mm (raised gantry) Spindle: 5.5 kW, water-cooled Inverter: 7.5 kW Control: DSP digital data processing + RichAuto-AutoNow-A11E controller Linear guides: Hiwin Software: ArtCAM For more information, please contact us.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Professional Embroidery Machine Model Mirror Model: Mirror Lrsdpfx Alsxbr Dho Njk Heads: 1 Needles: 15 Application: hats / finished garments / flat embroidery Embroidery area: 350 x 500 mm Hat embroidery area: 270° Maximum speed: 1000 RPM Motor: Servo motor High Quality and Optimal Performance with the Mirror Embroidery Machine The Mirror by IBAIMA represents excellence in professional embroidery technology, combining innovative design with top-tier performance. Its robust construction and quiet operation ensure absolute precision, even with the most complex embroidery designs. Ideal for various fabrics and materials, it is engineered for durability and consistent output. A Smart Upgrade for Growing Businesses If you are looking for a solution to boost your productivity, the Mirror is the perfect machine. With its two operational heads and 15 needles per head, it enables multicolor embroidery in reduced times, optimizing every phase of the workflow. It is the ideal choice for those who want to handle larger orders without compromising on quality. Ease of Use and Advanced Technology in the Mirror Equipped with state-of-the-art computer controls and an intuitive interface, the Mirror simplifies the management of every embroidery project. The machine supports fast and easy programming, helping to minimize downtime and boost efficiency, even for users with less industry experience. Reliability Trusted by Leading Companies The Mirror is chosen by professionals and companies seeking a reliable partner to develop their embroidery operations to the fullest. Its combination of technology, power, and versatility makes it a winning investment for those aiming to stand out on the market.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 118950, dolžina visokotlačne cevi: 15.000 mm, pritisk: 150 letvica, vhodna napetost: 230 V, The cold water high-pressure cleaner Kärcher HD5/15 CX Plus + FR Classic (surface cleaner) is a display unit in like-new condition. The compact, lightweight, and versatile HD 5/15 CX Plus + FR Classic cold water high-pressure cleaner impresses with excellent mobility and is suitable for both upright and horizontal operation. The unit is equipped with an ingenious accessory storage system and promises a long service life thanks to its brass cylinder head and automatic pressure relief. At the same time, it features innovative developments that sustainably enhance user comfort, allowing for fatigue-free operation and quick setup and breakdown. The EASY!Force high-pressure gun utilizes the recoil force of the high-pressure jet to reduce holding force to zero, while the EASY!Lock quick-release connections provide handling up to five times faster than conventional screw connections, without compromising on robustness or durability. An all-round convincing feature package for excellent cleaning results, with high comfort and long service life. Lsdpfx Alsyzpduo Njrk Technical Data: Voltage: 230V Power consumption: 2.8 kW Working pressure: 150 bar Connection cable: 5 meters