Systemtechnik Hölzer Gmbh Pladnjevni Zlagalnik Sortirna Linija Ravnanje nakup rabljenega (69.961)

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result Hodegl Nlmepfx Af Ten

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Hodov Rpxljpfx Af Tjn Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Hodpfx Afschuvro Tjn Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Hodogfm Ryjpfx Af Tjn Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160 Connection: 160 mm Fan: 2.2 kW Airflow: 1,850 m³/h / 400 V Hjdpfx Aferb D No Ten

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle Hsdpfx Afjdwktke Tsn - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Hsdpfsffh Atex Af Ten Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Hjdpfxjgmfa As Af Ton The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Stanje: dober (rabljeno), Leto izdelave: 2003, Naprava za čiščenje delov, IBS – rabljeno - : Cena na kos: 350 € (neto) Proizvajalec: IBS Scherer GmbH Tip: Tip F2 Leto izdelave: 2003 Hjdpfox El A Ujx Af Ton Serijska številka: 44675 Električni priključek: 1/N/PE 230V, 50Hz Nazivna moč: 18W, 0,2A Nosilnost: 60 kg Širina: 800 mm Lastna teža: 50 kg Velikost soda: sod 50 litrov Material ogrodja: jeklo Višina: 1125 mm Vrsta čiščenja: specialno čistilo Širina čistilnega korita: 790 mm Globina čistilnega korita: 540 mm Stanje: dobro Na voljo: takoj Lokacija: skladišče Frankenberg / Saška

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travels: X-axis 600 mm Y-axis (swivel position) 600 (975) mm Z-axis 500 mm Control System: Siemens 840D control, side-mounted Feedrate/Rapid traverse: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Mean acceleration: X, Y, Z: 2.5 m/s² Measuring System: Direct position measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40%ED) Power: 2 x 38 kW (S6/40%ED) HSK–A 100, horizontal side-by-side arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Work Area: Swing carrier with ground gear, max. payload 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. payload 700 kg, speed 25 rpm Partition between machining and loading area Tool Magazine: 2 x 50 tools HSK-A 100 chain magazine Tool change time (chip-to-chip): 4.48 sec. Max. tool diameter: 100 mm 250 mm with free adjacent slot Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Centralized lubrication Minimal quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant filtration with compact belt filter Hydraulic unit Maintenance unit Water chiller Fully enclosed, crane loading possible Hsdpfx Afjy Swq Ro Ten Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other: Very good condition Main-time parallel setup Available from December 2023/January 2024

Stanje: dober (rabljeno), 7x pallet transport racks, Lützenkirchen – used - : Hodpfx Afjw Acruo Tjn Price per unit: €395 (net), dismantled, packed, and loaded! Manufacturer: Lützenkirchen Lagertechnik GmbH Type: / Year of manufacture: not specified Load capacity: not specified Quantity: 7 Dimensions: L76cm x W60cm (54cm effective) x H30cm Condition: good Available: immediately Location: 04720 Döbeln

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: ITJ514296, Krmilnik AIR ENERGIE CONTROL 3+, maksimalni tlak 13 barov Hodpey Sqiysfx Af Tjn

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: ITJ719403, Upravljanje AIR ENERGIE CONTROL 3+, maksimalni tlak 13 barov Hodpey Sqkdsfx Af Ten

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10044/0218, Podrobne fotografije in specifikacije izdelka so na voljo v priloženi PDF datoteki. Stružnice so posebej zasnovane za obdelavo poročnih prstanov in zapestnic. Ločitev notranje in zunanje obdelave na dva stroja zagotavlja visoko produktivnost. Vse potrebne stružne operacije (ravnanje, radiji, bočna obdelava in posnemanje robov) je možno izvajati zaporedno, brez potrebe po prilagoditvah ali predelavah strojev. Tehnični podatki: Parameter Vrednost Pogon 0,55 kW z električno zavoro Napajanje 380 V / 50 Hz Hsdpfxoy S Sz Ro Af Ten Regulacija obratov potenciometer Razpon obratov 0–1400 vrt/min Dimenzije 100 × 70 × 130 cm Teža 170–190 kg

Stanje: novo, Cutting width: 115 and 82 mm Cutting height: 55 mm Motor output: 2.0 kW Machine weight: approx. 45 kg Mitre saw KS for (glass) bead cutting with manual and electronic length stop suitable for wood, PVC, aluminium ----- Short manufacturer description: - Cross-cut and mitre saw for precise and user-friendly shortening of profiles and beads - Robust grey cast iron construction - Double ball-bearing axis serves as the swing pivot point below the material support table, improving material cutting. The cut-off always occurs at the rear top. - Quick mitre adjustment up to 45° - Adjustable end stops at 90° and 45° - Upper saw blade guard connectable to extraction ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade Ø: 250 mm Extraction nozzle Ø: 45 mm Hjdpfxjy T R Sqs Af Ten ----- Technical description: Pos. 1.1 Cross-cut and mitre saw type KS, 2 kW, 400 V, 30/40 mm saw blade mount Pos. 1.2 Pivot point LEFT Pos. 1.3 Pneumatic material clamping for KS, both sides of the saw blade, 2 horizontal pneumatic cylinders, actuated via roller valve during saw stroke, can be switched off Pos. 1.4 Carbide-tipped circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth reverse ----- Price for the above-mentioned machine on request! plus packaging and shipping ----- Options at additional cost: Pos. 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Pos. 1.6: EUR 695.00 Machine stand for mitre saw KS ----- Pos. 2.1: Electronic length stop with support plate EUR 7,290.00 Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for profile cutting Travel 1.8 m, total length 2.0 m 10'' touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeatability accuracy +/- 0.1 mm Operating modes: (1) automatic stop absolute, (2) cut lists, (3) pusher cut lists, (4) pitch increment, (5) fine positioning Program memory for up to 999 cut lists USB import and direct editing of cut lists at the terminal Stop can be folded away to the rear With support foot Pos. 2.2: EUR 295.00 Support 2 m, right, 110 mm wide, with support leg ----- Pos. 3.1: Manual length stop EUR 600.00 Length stop 2 m, left, with 110 mm wide support, with scale, stop slider foldable and with support Pos. 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with support leg ----- (technical data as per manufacturer – subject to change) All prices are net, plus statutory VAT.

Stanje: rabljeno, Leto izdelave: 2012, Automated Plant / Application Areas: Chrome plating, Nickel plating, Copper plating / Program Stages: Pre-cleaning, Pretreatment, Metallization, Post-treatment / Base Materials: ABS and ABSPC / Technical Data: Work window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters galvanic surface per carrier, cycle time 3.00 min. per system, cycle time 2.50 min. for demetallization / Performance: 20 carriers per hour, clear anode/anode spacing (chrome) 700 mm, (copper) 700 mm, (nickel) 700 mm, clear entry dimension 550 mm (direction of travel), 3100 mm (width), bath dimensions (rinsing) 3100 mm x 700 mm / Power consumption: Drives: conveyor system 133 KW, filtration 194 KW, exhaust air 229 KW, wastewater plant 150 KW, control cabinets 704 KW, rectifiers approx. 3190 KW, heating power approx. 1410 KW / Consists of: automatic loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air system / Tanks, electroplating baths, and exhaust air system made of chemically resistant plastics. NOTE: Various ongoing expansions and modernizations of the plastic electroplating facility since 2015! Hodpfoy Rvtusx Af Tjn

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SV 5960/1, skupna masa: 73 kg, moč: 11 kW (14,96 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vhodni tok: 21 A, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.930 obr/min, vrsta zaščite (IP koda): IP55, Naprodaj je zmogljiv zračni puhalnik / stranski kanalni kompresor z visokokakovostnim trifaznim motorjem moči 11 kW. Agregat je primeren za industrijske uporabe, kot so prezračevanje, izsesavalna tehnika, pnevmatski transport, sušilne naprave ali procesna oskrba z zrakom. Tehnični podatki Moč: 11 kW Napetost: 400 V (trifazno) Frekvenca: 50 Hz Poraba toka: 21,8 A Število vrtljajev: 2.930 vrt/min Učinkovitost: IE3 Premium Efficiency (91,2 %) Stopnja zaščite: IP55 Izolacijski razred: F Način delovanja: S1 (neprekinjeno delovanje) Velikost: 132M Hodpfx Afey U Uhlo Tjn Oblika: IMB5 Temperatura okolice: do 40 °C Teža: pribl. 73 kg Proizvedeno v Nemčiji

Stanje: dober (rabljeno), Leto izdelave: 1999, Approx. 23 pieces of OTTO hazardous goods containers, 600L, large packaging unit "IBC" – used: Price per unit ex-location: €395 (net)! Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Hedowzyn Depfx Af Tsn Serial number: 33782 Year of manufacture: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross weight: 1,090 kg Tare weight: 190 kg With certification as a large packaging "IBC" for national (GGVS/GGVE/GGVS) and international (ADR/RID/IMDG-Code) transport of dangerous goods of packaging groups I, II & III (X-coding) * Dimensions in accordance with DIN 30741 * Container made of steel, hot-dip galvanized * With hinged, lockable lid * Lid locks in place at any opening angle up to approx. 70° with special spring mechanism * Container secured all around with only 2 locks at the front * With forklift pockets, retaining hooks for PE bags, nameplate and pocket Condition: good Available: immediately Location: D-06766 Bitterfeld-Wolfen

Stanje: pripravljen za uporabo (rabljen), Transporter za ostružke, polžasti transporter, dvojni polžasti transporter, rabljeni stroj Proizvajalec: Ventilatorenfabrik Oelde GmbH Skupne dimenzije: Hedpjy H I Uisfx Af Ten Širina: 9460 mm Globina: 1340 mm Višina: 2300 mm Dimenzije žleba: 8830 × 900 × 340 mm Dovodna odprtina: 1230 × 1200 mm Izhodna odprtina: 730 × 535 mm Električni podatki: 400 V Sistem dvojnega polžastega transporterja.

Leto izdelave: 2023, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MS06001129, MlttiScan 600 se uporablja za zajem osnovnih podatkov. Artikli se merijo in tehtajo z uporabo 3D-merilne tehnike. Hjdpfoy U Upvox Af Tjn

Stanje: zelo dobro (rabljeno), Weiss Spray Water Test Unit Type: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test unit manufactured by Weiss Umwelttechnik. The system is designed for standardized water, spray water, and ingress protection testing according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industrial, automotive, electronics, quality assurance, R&D, test laboratories, research, and material testing applications. Operation is via an integrated touch control panel. Test procedures can be performed automatically. System Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800-S Spray Water Test Unit Test Types: IPX1 IPX2 IPX3 IPX4 IPX4K IPX9K Hsdpfxjzachco Af Ton Stainless steel test chamber Rotating test table Swivel arm system Water circulation Available test accessories Electrical Data Supply Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated Power: 17 kW Rated Current: 30 A Wiring Diagram No.: 82962 CE marking available Water Supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: adjustable approx. 80 to 100 bar Technical Data Rotation table speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10°C to 35°C Noise level: approx. 88 dB(A) Heat dissipation to surroundings: Average approx. 1 kW Maximum approx. 3.5 kW Equipment Touch control panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Spray ring/nozzle ring High pressure unit Flow meter ESD earth bonding point CE marking Robust industry-grade construction Dimensions / Weight Test chamber SWT 600/800: Approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door lock: Approx. 2,350 x 2,400 x 1,850 mm Weight of test chamber: approx. 650 kg Dimensions of high pressure unit: Approx. 850 x 1,200 x 800 mm Weight of high pressure unit: approx. 380 kg Total weight: approx. 1,030 kg Documentation Operating manual EC declaration of conformity Quality inspection certificate Technical documentation as shown in the pictures Accessories Spray ring/nozzle ring Test and spray components Swivel arm accessories Flow meter Connection components Tools and keys Documentation and papers Condition Used equipment from industrial use. Visual condition as shown in the pictures. The system can be powered on. Display and control interface are operational and visible. No further technical inspection, calibration, or complete functional testing has been carried out. Inspection and testing on site by appointment are possible and recommended. Scope of Delivery Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Rotating table and swivel arm Test and spray accessories as shown in the pictures Operating manual and documentation Accessories as shown in the pictures The table shown in the photos is not included. Loading by arrangement possible. Transport and shipping by suitable forwarding agent required. Dimensions, weights, and technical data are partly taken from documentation. Data may vary. Commercial sale without warranty. Subject to change, error, and prior sale.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Ponujamo pocinkan zračni zbiralnik – 5000 l. Proizvajalec – OKS Otto Klein GmbH Največji delovni tlak – 11 bar Letnik izdelave: 2018. Dimenzije: Premer – 1400 mm Hjdpfsy Slkrox Af Ten Višina – 3570 mm Teža – 1050 kg Zračni zbiralnik vključno z armaturami – varnostni ventil, manometer + prirobnice.

Stanje: rabljeno, Leto izdelave: 2023, obratovalne ure: 22 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61035145, vpenjalna sila: 1.200 kN, premer vijaka: 35 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 2.429 letvica, injekcijska masa: 140 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 120 mm, odmični hod: 950 mm, vgradna višina: 450 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 6.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection molding, enabling you to respond quickly and innovatively to market requirements. It combines high performance, easy operation, and short delivery times. It can be used in a wide range of applications, for example in the packaging industry, electrical and electronics industry, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Realization of demanding delivery times thanks to the base machine concept with a wide range of options Hjdpsy Rmwdsfx Af Tjn TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM  MC P1 with 15" TFT color display with multitouch functions CLAMPING UNIT  Clamping force kN 1200  Maximum mold opening force kN 180  Tie bar spacing (h x v) mm 520 x 470  Mounting platen (h x v) mm 690 x 640  Mold height min. - max. mm 180 - 450  Maximum opening stroke mm 850  Maximum mold opening travel mm 450  Ejector drive electric  Ejector stroke mm 120  Ejector force forward/backward kN 27 / 33  Ejector speed forward/backward mm/s 300 / 300  Maximum mold weight kg 850 INJECTION UNIT  Screw diameter / type mm 35 / standard  Effective L/D ratio 22.9  Injection pressure bar 2429  Shot volume cm³ 154  Shot weight at max. stroke for PS g 140  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive / speed 1/min 374  Plasticizing rate (standard screw)4) g/s 18.9  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 22.7  Installed heating power kW 11.5  Power supply V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 6.7  Length x width x height m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing unit  BluePower full insulation for plasticizing cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface pneumatic cascade 4-fold  Euromap interface for handling E18 + E67  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Electrical pre-equipment for hydraulic auxiliary unit  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression molding circuit  Graphic analysis package  Swivel device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 1.609 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61008195, vpenjalna sila: 800 kN, premer vijaka: 40 mm, razmak između stupova: 420 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 183 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 750 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The fully hydraulic CX series impresses with exceptionally compact, efficient, and flexible two-platen machines. The highly compact two-platen concept with a cantilevered clamping unit provides generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with the BluePower servo drive further establishes a powerful foundation to meet the highest demands and to provide the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display and multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Max mold opening force: kN 55 - Tie bar clearance (h x v): mm 470 x 420 - Mounting plate size (h x v): mm 670 x 670 - Mold installation height min.-max.: mm - Maximum daylight opening: mm 750 - Max. mold opening stroke: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force forward/return: kN 23 / 10 - Ejector speed forward/return: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT - Screw diameter / Type: mm 40 / Standard (other diameters available) - Effective L/D ratio: 20 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow: cm³/s 126 - Screw drive/speed: rpm 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phase with neutral WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 3.55 - Length x width x height: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control zone for nozzle heating - Air valve, single (BWAP) - Pneumatic control for hot runner closure, single - Hydraulic core pull, single (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression mode - Graphics analysis package Hjdpfxey Rlmws Af Tjn The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Leto izdelave: 2006, obratovalne ure: 5.840 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6398921, Prosimo, navedite svojo ponudbeno ceno. Prodaja samo znotraj Evrope, vključno s Turčijo. ----- Hsdpjy Ta Alefx Af Ton Tehnični podatki so navedeni v priloženem dokumentu. Brez embalaže; Če želite napravo razstaviti sami, prosimo, navedite to v vaši ponudbi. Za pravilnost tehničnih podatkov, popolnost pribora in orodij ter za izpolnjevanje vseh varnostnih in okoljskih zahtev, navedenih v predpisih za preprečevanje nezgod, ne prevzemamo nobene odgovornosti. Vsaka garancija je izključena.