Sapi Gmbh Rücksaug - Strahlgeräte Druck-Sandstrahlgerät nakup rabljenega (69.689)

Stanje: pripravljen za uporabo (rabljen), Na voljo je popolna dvojna mešalna naprava 2 x 3000 l iz visokokakovostnega nerjavečega jekla V2A, vključno s propelerskimi mešali iz V2A, s tekočo nastavitvijo števila obratov. Ogled možen po dogovoru. Klsdpfx Aley A Sk Tj Njr

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), Na voljo je popolna polnilna linija z 12-mestnim gravitacijskim in tlačno-polnilnim strojem z integriranim zapiralcem Twist-Off za živilsko industrijo. Polnilna mesta: 12, konstrukcija: rotacijska, viskoznost tekočin: nizka-srednja, zmogljivost polnjenja: pribl. 2000 steklenic/uro, zmogljivost zapiranja: pribl. 1000–1200/uro, rezervoar: toplotno izoliran, prostornina rezervoarja: 35 l/50 l. Gre za popolno polnilno linijo, ki vključuje transportne trakove, zbirno mizo, senzoriko, vrtljive mize, črpalke in formatne dele. Linija je bila leta 2024 izključena iz obratovanja. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Klsdpfxsy Ax Ufo Al Ner

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Rabljeni stroj za polnjenje in zapiranje steklenic Holdefleiss tip 12/3. Stroj je pripravljen za 0,5 l Euro in 0,33 l Long-Neck steklenice, vključno z HDE. Stroj je brez predvakuumskega sistema, opremljen z dolgocijevnimi polnilnimi ventili. Polnilni ventili bodo na novo zatesnjeni. Izvedeta se test tesnosti in tlačni preizkus. Ksdpfsyycudsx Al Nslr

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Ksdpfx Aeyz Sn Nsl Njlr

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, moč: 2.500 kW (3.399,05 KM), vhodna napetost: 380 V, vhodni tok: 53 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, stiskalna sila: 250 t, dolžina mize: 4.050 mm, leto zadnje generalne obnove: 2007, Oprema: dokumentacija / priročnik, We are offering this used Eisen u. Hammerwerk GmbH – EHT EHPS 25-40 press brake (hydraulic press brake/bending press) for sale. Immediately available. Ready for operation. Being sold due to replacement with a new machine. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) Klodsy D Sy Rjpfx Al Njr - Foot pedal control - Supplied with various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Capacity: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Current type: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require further information, please feel free to contact us by message or give us a call. Machine location: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 512 mm, skupna višina: 1.952 mm, skupna dolžina: 772 mm, Direct from the manufacturer, the original from Apfel GmbH. Fully assembled, including: - 2 shelves KRB 4700 - 1 storage bin KEN 6422 (No. 62) - 2 storage bins KEN 4322 (No. 42) Kledpfjuvigpjx Al Nsr - 1 waste bin made of galvanized sheet metal - 2 brooms - 1 hand brush - 1 dustpan - 1 set of shadow boards - 1 compartment for cleaning agents - 4 swivel castors with locking brakes Load capacity: 400 kg Dimensions: 512 W x 1,952 H x 772 D (mm) Frame powder-coated in black-grey RAL 7021 (body) Various versions and custom solutions available—we as the manufacturer are happy to support you with your requirements! (See pictures 3+4)

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, gradbena višina: 2.200 mm, število vreten: 3, zahteva za prostor dolžina: 5.000 mm, potrebna širina: 5.500 mm, številka stroja/vozila: 50844458, stopnja avtomatizacije: samodejen, proizvodna zmogljivost: 3.000 enota/h, We are offering this used PIA Automation production line for surgical disposable masks, year of manufacture 2020. The line was operated for only 2.5 years in single-shift operation and its condition can be described as "very good." In addition, the production line includes an integrated compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Supply line circuit protection: 25 A Klsdpsy Ddnmsfx Al Nor Short-circuit rating: < 10 kA Concept: The line consists of a total of three modules, connected via conveyor belts. In the first segment, the individual consumables are fed by rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished masks are then transported to the next modules via a step conveyor and transport belts. These modules are arranged in parallel, where the ear loops are automatically fed and welded to the masks. If you have any questions or need further information, feel free to send us a message or give us a call.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, trajanje garancije: 12 meseci, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany Ksdpfx Alsyycqxe Nslr • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: rabljeno, Leto izdelave: 1994, Mehanska enota za sortiranje in transport Kodpfx Alewtnl Uo Nolr

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Klsdpfxjyybh As Al Ner Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Letnik izdelave: 2025 Stanje: novo ID kategorije: 679 Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) Ksdpsyx Hrkjfx Al Nelr • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg Kledpfx Aeyx Hgbel Nsr • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V primeru vprašanj me lahko kadar koli kontaktirate po e-pošti. Kjdpfoya H Uysx Al Nslr Lokacija stroja je v Laupheimu.

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 Kedowf Rg Sjpfx Al Njlr --> Water cooling unit for the welding torch: integrated

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Klodpfxjwf Rgro Al Nsr Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. Kjdswf Rg Eopfx Al Nelr In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Ksdpfx Aewf Rgxjl Nslr Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and rotating device. Special equipment for specific applications, designed and manufactured by FÖRSTER Welding Systems GmbH. Maximum workpiece diameter: 2500 mm Maximum workpiece weight: 20 tons Dimensions of the welding positioner: 7000 x 3000 x 3750 mm Kodpfx Alourlcre Njlr Weight (without counterweight): 20,000 kg Overall dimensions of the entire system: 8900 x 4800 x 3750 mm Total weight of the entire system: 40,000 kg Counterweight included in the scope of delivery. Complete documentation available. Technical support from the manufacturer is available upon request. The machine is located in central Poland.

Stanje: rabljeno, Trivaljni valjar za testo Kjdpfx Aley Akd Eo Nslr

Leto izdelave: 2013, stanje: rabljeno, Proizvajalec: PAUL VON DER BANK GMBH, Tip: Robotska varilna naprava, Leto izdelave: 2013, Serijska št.: 13.536, Varilni vir, proizvajalec Fronius, tip CM TransPuls Synergic 4000, Hladilna naprava, Varilna enota VR7000CMT, Programirni terminal RCU5000I, Obratna miza, Varilni robot, proizvajalec KUKA, tip KR5-2ARC, Robotska krmilna enota KRC4, Odsesovalna naprava, proizvajalec Plymovent – naprava ni priključena Kjdpfxeyx Exvo Al Nelr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 21 A, vrsta vhodnega toka: Enosmerni tok, volumenski pretok: 6.045 m³/h, skupna masa: 1.100 kg, ODSESOVALNIK ALKO ECO JET 60/5 HD Odvod žagovine, odvod prahu, samočistilni filter, podtlak ALKO ECO JET Filter se pnevmatsko čisti z impulzi stisnjenega zraka med delovanjem, kar zagotavlja visoko učinkovitost naprave. Ksdpeyrqnzjfx Al Njlr Idealen za vse vrste suhega prahu pri različnih tehnoloških postopkih. Možna je menjava filtrirnih vreč glede na zahteve in namen uporabe.

Leto izdelave: 2024, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F50, For sale is a FiberFlow F50 cooling die by DIL Engineering GmbH – a specially developed solution for structuring alternative proteins in High Moisture Extrusion (HME). This cooling die is ideal for use in research and development, enabling the targeted production of fibrous, meat-like textures that are particularly in demand for modern meat and fish alternatives as well as for snacks and convenience products. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow guidance and fiber formation. The system is modular and can be configured with one or two segments as required. In addition, one or two separate cooling circuits are available, ensuring precise temperature control for consistently high product quality. Integration of inline measurement systems is possible, allowing continuous process monitoring and optimization. Klsdpfx Aey D Hrbol Ner Special attention has been paid to hygienic design, ensuring the system meets the stringent requirements of the food industry. Thanks to its well-designed construction, cleaning is straightforward and quick, which is a particular advantage for development operations. The FiberFlow F50 is ideally suited for pilot trials, product development, and recipe optimization in the field of alternative proteins, and can be easily integrated into existing extrusion lines.

Leto izdelave: 1999, stanje: dober (rabljeno), Funkcionalnost: omejena funkcionalnost, !!! Important!!! The systems have now been dismantled. The system components can be inspected on site. For sale here are 2 fully functional SLC (Surface Like Chrome) vacuum coating systems / metallization units manufactured by PVT GmbH. A 3rd non-functional system is no longer available for sale. Complete documentation for the systems is available in paper form and will be handed over upon purchase. In order to operate the systems, a compressed air supply, power supply, and water cooling system are required and must be provided by the buyer. All other PVT processes are, of course, possible as well. The system was primarily used for processing wheel rims. Treatment of other workpieces made of aluminum, steel, or plastic is also possible, such as bathroom/kitchen fittings, motorcycle and automotive add-on parts, door and window handles, etc. What are the advantages of the SLC process compared to conventional chrome plating: - SLC coating is a high-gloss finish optically comparable to electroplated chrome - Significantly more resistant to scratches and chipping - The process is more environmentally friendly and provides outstanding corrosion resistance - Costs are considerably lower Technical data: Kjdpfx Ajyzdm Rsl Njlr Chamber internal dimensions approx. 1600 mm diameter, approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Year of manufacture: 1998/1999 Documentation: available Control: Allen Bradley PLC (automatic coating process including hardware)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) Klodpjyxccrofx Al Nor • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy, and small workpieces. Kledpfx Aju Smcbjl Njr The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a hand scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 watt, 50 watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light for operating status (on handheld unit) • Marking software: EZCAD • Power connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system