Kk-Industries Cy4R-Hhs 540-40/35 nakup rabljenega (55.029)

Stanje: novo, Dolžina upogibanja: 2100 Debelina pločevine: 45 Upogib: 35 Premer zgornjega valja: 430 Stranski valj: 390 Motor: 30 Dimenzije (DxŠxV): 5200 x 2200 x 2500 Teža cca: 19000 Tehnični podatki: - Kaljeni in polirani valji - Celotno ohišje iz ST-52 jekla - Naprava za stožčasto krivljenje - Digitalni prikaz za stranske valje - Prenosna kontrolna konzola - Valji so montirani na ležajih - Pokrov zgornjega valja, hidravlično odpiranje in zapiranje preko nadzorne plošče - Vse valje poganja hidravlični motor in planetno gonilo Isdpfeytyy Njx Agfotl - Stranski premiki poganjani hidravlično

Stanje: novo, Bending length: 3100 mm Sheet thickness: 10 mm Top roll diameter: 270 mm Technical data: Itedpfx Asd Ab Tcsgfjl - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls mounted on bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements are hydraulically powered Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 7,070 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 16 mm Top roll diameter: 270 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device Isdpfx Aod Ab Tfegfotl - Digital display for side rolls - Portable control panel - Rollers mounted with bearings - Upper roll cover hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Side movements hydraulically driven Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 5,700 We have many references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 8 mm Upper roller diameter: 210 mm Technical specifications: - Hardened and polished rollers - Full body made from ST-52 steel - Conical bending device - Digital readout for side rollers - Portable control panel - Rollers mounted on bearings - Upper roller cover hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: Iodpfx Asd Ab Tljgfetl - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 6,600 We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 10 mm Top roller diameter: 210 mm Technical specifications: Ijdjd Ab Tmspfx Agfstl - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers are mounted on bearings - Top roller cover, hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed EUR 4,682 - Material feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 4,600 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 45 mm Top roll diameter: 510 mm Technical specifications: - Hardened and polished rolls - Entire frame made from ST-52 steel Itedod Ab Snopfx Agfel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover hydraulically opened and closed via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements driven hydraulically Options: - Variable rotation speed EUR 5,858 - Material feed table on request - Oil cooler STD. - Central support EUR 18,750 - Side supports EUR 15,150 We have numerous references!

Stanje: novo, Sheet length: 2600 mm Sheet thickness: 20 mm Top roll diameter: 330 mm Technical data: - Hardened and polished rolls - Full body made from ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls are mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically powered Options: - Variable rotation speed EURO 4,682 Iodpfx Asd Ab S Nogfjtl - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,200 We have many references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 10 mm Top roll diameter: 230 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital readout for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 6,600 Ijded Ab Thopfx Agfetl We have numerous references!

Stanje: novo, Bending length: 2100 mm Sheet thickness: 13 mm Top roll diameter: 230 mm Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel Isdjd Ab Tijpfx Agfjtl - Rolls mounted with bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements are hydraulically driven Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 8,250 - Side supports EURO 5,560 We have numerous references!

Stanje: novo, Bending length: 1600 mm Sheet thickness: 8 mm Top roll diameter: 190 mm Itodpsd Ab Tqefx Agfsl Technical Specifications: - Hardened and polished rolls - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically operated Options: - Variable rotation speed: EUR 4,682 - Material feed table: on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 4,580 We have numerous references!

Stanje: novo, Bending length: 2100 Sheet thickness: 6 Top roller diameter: 160 Technical specifications: Itsdpsd Ab Trjfx Agfsl - Hardened and polished rollers - Full body made from ST-52 steel - Conical bending device - Digital display for side rollers - Portable control console - Rollers mounted with bearings - Top roller cover, hydraulically openable and closable via control panel - All rollers powered by hydraulic motor and planetary gearbox - Lateral movements are hydraulically driven Options: - Variable rotation speed EUR 4,682 - Sheet feed table on request - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 4,600 We have many references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 25 mm Top roll diameter: 390 mm Technical data: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls Itjdpod Ab Swjfx Agfol - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed EURO 4,682 - Material infeed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 10,540 We have numerous references!

Stanje: novo, Bending length: 2600 mm Sheet thickness: 30 mm Top roller diameter: 390 mm Technical specifications: Itedpfjd Ab Sxex Agfjl - Hardened and polished rollers - Full body made of ST-52 steel - Conical bending device - Digital readout for side rollers - Portable control console - Rollers mounted on bearings - Upper roller cover, hydraulically openable and lockable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed, EUR 4,682 - Material feed table on request - Oil cooler, EUR 1,040 - Central support, EUR 13,600 - Side supports, EUR 9,450 We have numerous references!

Stanje: novo, Bending length: 3100 mm Sheet thickness: 16 mm Top roll diameter: 330 mm Itjdpfxod Ab S Is Agfel Technical data: - Hardened and polished rolls - Full frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted with bearings - Upper roll cover, hydraulically openable and lockable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements hydraulically powered Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 9,400 We have numerous references!

Stanje: zelo dobro (rabljeno), Prodam motorno reduktorjo proizvajalca Getriebebau NORD s spiralnim prenosom in trifaznim motorjem. Naprava je popolnoma delujoča, preizkušena in pripravljena za uporabo. Tehnično stanje je zelo dobro, vizualno pa ima normalne znake uporabe, ki so posledica delovanja. Motorna reduktorja je idealna za pogon tekočih trakov, podajalnikov, industrijskih strojev, mešalnikov in drugih naprav, ki zahtevajo velik navor pri nizki hitrosti. Ijdpjznk U Eefx Agfotl Tehnični podatki: Proizvajalec prenosa: Getriebebau NORD Tip prenosa: 1S50VZ.71 L/4 Prestavno razmerje: i = 35,00 Izhodna hitrost: 40 vrt/min Proizvajalec motorja: NORD Tip motorja: SK 71L/4 Moč: 0,37 kW Napetost: 230/400 V Δ/Y (50 Hz) 265/460 V Δ/Y (60 Hz) Hitrost motorja: 1360 vrt/min (50 Hz) 1630 vrt/min (60 Hz) Stopnja zaščite: IP55 Razred izolacije: F Način delovanja: S1

Stanje: novo, Further technical data available on request Technical specifications: Itodpfx Agod Ab U Uofjl The machine frame is manufactured from high-strength materials by electric welding and stress-relieved by annealing before machining, to ensure close manufacturing tolerances for the sensitive flanging process. The upper and lower head holders slide along the main body structure for rigidity and reduced vibrations during flanging. Both the upper and lower head holders are driven by hydraulic motors for vertical movement and clamp the head using hydraulic cylinders. The spindle roller is driven by radial piston hydraulic motors for high speed and high torque. The flanging roller is driven by three cylinders for vertical and horizontal movements and slides between two main body structures. Both rollers are made from a special alloy for long corrosion resistance. Centralized lubrication system. Lower support rollers are actuated by hydraulic cylinders to support the head during the flanging process. The hydraulic system consists of a radial piston pump, oil tank level indicator, filter with contamination indicator, and globally recognized brands. Options: Numerous references available!

Stanje: novo, x-axis travel: 4000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump output for flushing: 37 kW Control: Siemens PLC touch screen, direct import of usable DXF files Max. output pressure: 5500 bar Abrasive delivery system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor for monitoring abrasive feed to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is pressurized up to 5500 bar. Depending on the requirements and workpiece, it is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. Since the waterjet process works without heat input, material deformation is avoided. By adding abrasive, waterjet cutting achieves maximum precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and bevel cuts. We are happy to receive your custom CAD files. Waterjet technology provides significant advantages for industry, trade, and custom prototyping. It is also environmentally friendly as waterjet cutting operates dust-free and steam-free, while also conserving material. Waterjet cutting: example gallery What already sounds impressive in theory is even more striking in the finished product. We have compiled a selection of images to demonstrate our capabilities in waterjet cutting. Click through our sample gallery to see what is possible with this modern processing technology. Waterjet will find the ideal solution for your application! Advantages - No deformation in the cutting area - Cutting without thermal input - Material saving - High precision: +/- 0.1 mm - Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing - Vertical and bevel cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, dust- and steam-free We cut everything! All materials shaped, including: - Aluminium - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - composites Iedpfx Agod Ab Uujfotl - Foam material cuts - Rubber - Plastics - Plexiglas Optional: Oil cooler                                                                € 10,725.00 Water filtration system                                              € 1,430.00 Sludge extraction system                                            € 10,725.00 Professional water treatment system                        € 10,725.00 An oil cooler must be present during commissioning!!! Operation for longer than 1 hour is only possible with an oil cooler.

Stanje: novo, Bending length: 1600 mm Sheet thickness: 6 mm Top roller diameter: 140 mm Technical data: - Rear roller powered by motor - Cone bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rollers driven by brake electric motors and planetary gearboxes - Portable control panel - In compliance with CE standards Options: - Bottom roller powered by electric motor EURO 1,512,-- - Digital display for rear roller position EURO 1,010,-- - Extended rollers EURO 966,-- - Profile rollers EURO 1,190,-- Isdpjd Ab Ntefx Agfjtl We have a large number of references!

Stanje: novo, Bending length: 1250 mm Sheet thickness: 5.5 mm Top roll diameter: 140 mm Technical data: - Rear roll driven by electric motor - Cone bending device - Hardened and polished rolls - Entire frame made from St 52 steel - Main motor equipped with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Rear and bottom rolls adjusted manually Itjdpfx Aod Ab Nvegfel - Compliant with CE standards Options: - Top roll driven by electric motor, EURO 1,260 - Digital display for rear roll position, EURO 1,010 - Hardened rolls, EURO 1,489 - Special voltage, EURO 480 - Material feed table - Bottom roll driven by electric motor We have numerous references!

Stanje: novo, Laser power: 4Loading capacity: 1250x travel: 2020y travel: 4050z travel: 350Positioning accuracy: 0.05Repeatability: 0.03Table change time: approx. 10Cooling system: Water chillerWeight approx.: 11500Dimensions (LxWxH): 4400 x 10000 x 2120 The FLC series is a fast, sensitive, reliable and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine that meets the standards of the upper price class. It can support laser power up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used for manufacturing agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for those looking to outsource cutting operations. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. A standard nesting software program very quickly prepares parts for cutting without any operator intervention. It also features a fly-cutting function. The double automatic changing table allows you to continue cutting without downtime. All our machines are manufactured according to European standards and come with a CE certificate. Our FLC machines are equipped with nozzle cleaning and a dual camera system. Choose from cutting area sizes of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus and an active anti-collision feature, as well as an auto-view function that detects obstacles and automatically moves. Cutting heads are equipped with automatic cooling. The bridge used in all our machines consists of a welded aluminum alloy sheet construction in a single piece. This unibody design ensures the rigidity of the bridge and prevents deformation due to impacts, overlaps, or loads. Furthermore, the lightweight structure—three times lighter than steel profile bridges—enables high speeds and acceleration with lower motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19" touchscreen CNC control Iedpferuwbijx Agfetl - Fly cutting - Nozzles and lenses starter kit - Scrap collection drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera SPECIFICATIONS VALUEWorking area 2000 x 4000 mmLoading capacity 1200 kgXY axis travel 2020 x 4050 mmZ axis stroke 350 mmXYZ axis guide 4-point ball cageXY axis drive system Rack and pinionZ axis drive system Ball screwXY axis speed 100 m/minZ axis speed 30 m/minXY positioning accuracy 0.05 mmXY repeatability 0.03 mmTable change time 10 secLaser source Raycus / Hans / JPTLaser source output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kWCNC control system FscutLaser cutting head Raytools / BOCI / WSXSupported gases Air/O2/N2

Stanje: novo, Laser power: 2Loading capacity: 1250x-Travel (X): 2020mmTravel (Y): 4050mmTravel (Z): 350mmPositioning accuracy: 0.05 mmRepeatability: 0.03 mmTable changeover time: approx. 10 secCooling system: water chillerApprox. weight: 11,500 kgDimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, responsive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting system that meets premium-level standards. Capable of supporting laser power up to 30,000 W, it is an excellent choice for cutting thick sheet metal. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and plants. It is an ideal cutting system for those looking to outsource their work. Enables easy blowing, cutting, pausing, calibration simulation, etc., via wireless remote control. Comes standard with nesting software, that quickly and automatically prepares parts for cutting without operator intervention. Also features a flycut cutting function. With a dual exchange table, you can continue cutting without any waiting time. Ijdjruwbxjpfx Agfjtl All our machines are manufactured to European standards and feature CE certification. Our FLC machines include automatic nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head offers autofocus, active anti-collision functionality, and auto-view for obstacle detection and automatic movement. Cutting heads are equipped with automatic cooling. All machine bridges are fabricated as one-piece welded aluminium alloy sheet structures. This single-piece design ensures bridge rigidity and prevents deformation during collisions, overlaps, or high loads. In addition, their structure is three times lighter than steel bridges, allowing higher speeds and acceleration with lower motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Nozzles and lenses incl. starter kit - Workpiece debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliant - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY Travel: 2020 x 4050 mm Z-Axis Travel: 350 mm XYZ Axis Guidance: 4-point ball cage XY Axis Drive System: Rack and pinion Z Axis Drive System: Ball screw XY Axis Speed: 100 m/min Z Axis Speed: 30 m/min XY Position Accuracy: 0.05 mm XY Repeatability: 0.03 mm Table Changeover Time: 10 sec Laser Source: Raycus / Hans / JPT Laser Output Power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC Control System: Fscut Laser Cutting Head: Raytools / BOCI / WSX Support gases: Air / Oxygen / Nitrogen

Stanje: novo, Bending length: 2600 mm Sheet thickness: 4 mm Top roller diameter: 140 mm Sheet length: 2,600 mm Technical Data: - Rear roller driven by motor - Cone bending device - Hardened and polished rolls - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearbox - Portable control panel Itedped Ab Nrjfx Agfel - Complies with CE standards Options: - Bottom roll driven by electric motor EURO 1,513 - Digital display for rear roller position EURO 1,010 - Extended rolls EURO 966 - Profile rolls EURO 1,190 We have numerous references!

Stanje: novo, Bending length: 2050 Sheet thickness: 4.5 Top roller diameter: 140 Technical data: - Rear roller motor-driven - Conical bending device - Hardened and polished rollers - Entire frame constructed from St 52 steel - Main motor with brake system - Top and bottom rollers powered by electric motor, gearbox and gear system - Portable control panel - Cast iron frame - Manual adjustment of rear and bottom rollers - Compliant with CE standards Options: - Top roller powered by electric motor EURO 1,260 - Digital display for rear roller position EURO 1,010 - Hardened rollers EURO 1,489 Itodpfxsd Ab Nue Agfel - Special voltage EURO 480 - Material feed table - Bottom roller powered by electric motor We have numerous references!

Stanje: novo, Laser power: 12 kW | Loading capacity: 1250 kg | X-axis travel: 2020 mm | Y-axis travel: 4050 mm | Z-axis travel: 350 mm | Positioning accuracy: 0.05 mm | Repeatability: 0.03 mm | Table changeover time: approx. 10 s | Cooling system: Water chiller | Weight: approx. 11,500 kg | Dimensions (LxWxH): 4400 x 10,000 x 2120 mm The FLC series is a fast, sensitive, reliable, and cost-efficient fiber laser cutting machine. This high-efficiency machine competes with top-tier models and supports a maximum laser power of up to 30,000 W, making it an excellent choice for cutting thick plates. FLC fiber laser cutters are commonly used in the production of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large machines and systems. Ideal for businesses seeking to outsource cutting operations. Functions such as blowing, cutting, pausing, calibration simulation, and more are possible via the wireless remote control. Standard nesting software quickly prepares parts for cutting without operator input and includes a flycut function. Thanks to its dual exchange table design, cutting operations can continue seamlessly without waiting time. Isdpfx Ageruwbqofotl All our machines are manufactured according to European standards and carry a CE certificate. FLC models are equipped with nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head features autofocus and an active anti-collision function, along with an auto-view function that detects obstacles and automatically adjusts its path. Cutting heads feature automatic cooling. The bridges in our machines are made of one-piece, welded aluminum alloy construction. This design ensures rigidity and prevents deformation from shocks, overlaps, or loads. Moreover, these bridges are three times lighter than steel profiles, enabling higher speed and acceleration with reduced motor power. Accessories included: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flycut function - Nozzle and lens starter kit - Parts debris drawers - Automatic table exchanger - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS | VALUE Working area: 2000 x 4000 mm Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z-axis travel: 350 mm XYZ axis guide: 4-point ball cage XY drive system: Rack and pinion Z-axis drive system: Ball screw XY-axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table change time: 10 s Laser source: Raycus / Hans / JPT Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut

Stanje: novo, Sheet length: 4065 mm Sheet thickness: 10.0 mm Total power requirement: 22 kW Approx. weight: 14,900 kg Dimensions (LxWxH): 4860 x 3170 x 2430 mm Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4010, offers everything required for perfect cutting results. KKI CNC swing beam-guided guillotine shear: Due to its robust and durable mechanical and hydraulic systems, precise backgauge with ball screw, and user-friendly CNC control, our guillotine shears are highly efficient production machines. Shearing capacities for sheet thicknesses from 6 mm up to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, higher sheet thicknesses and longer cutting lengths are available upon customer request. The long service life of our guillotine shears is due to their particularly sturdy construction with a fully welded frame. The entire machine body, cutting beam, and backgauge are highly resistant to torsion and deformation, ensuring superior cutting quality. By simply entering the sheet thickness and material type, the CNC control unit automatically determines the required cutting angle and blade gap. Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 4010, offers everything required for perfect cutting. Technological Advantages: - Fast and precise cuts - Robust, durable frame design - Automatic blade gap adjustment - Simple operation - Low maintenance costs Itjdpfehp Dkbox Agfsl - High safety standards - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design Model AS 4010 has everything you need for perfect cutting results. With our patented blade support system, we can finely adjust and stabilize the upper blade, ensuring precise, high-quality cuts and preventing the so-called 'banana cut'. Technical Data: Sheet thickness: 10 mm Cutting length: 4,065 mm Cutting angle: 0.5 - 3° Number of hold-downs: 23 Backgauge: 1,000 mm via CNC Motor power: 11 kW Cutting speed (0.5 - 3°): 23-9 (cuts/min) Throat depth: 350 mm Oil tank: 200 liters Length: 4,830 mm Width: 2,300 / 2,955 mm Height: 2,130 mm Weight: 11,150 kg • Swing beam design • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screws for the backgauge • Balls on table • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard Optional pneumatic sheet support, EUR 8,420,-- We have numerous references!