3-valjni stroji za valjanje pločevine z električnim pogonom

KK-Industries CYL 140-20/4.5

Stanje: novo, Table diameter: 350 mm Table load capacity: 0.1 t Swivel range: 0–90 degrees Table load horizontal: 100 kg Table load vertical: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx.: 0.2 t Required space approx.: 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axis - Steplessly adjustable speed Fedjgvkk Nepfx Aflspb - Compact design - Including foot pedal

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.230 kg, AUTOMATIC DOUBLE-HEAD SAW STB / FIMTEC SD 500 S6 YEAR 2005 Fpedpfx Afsr E Alqoljb

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Fpjdpfofh R N Dex Afljb Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Leto izdelave: 2024, Stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Fpjdpfx Asftdh Isflsb Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation - 400V Fjdpogg Nv Iofx Afljpb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, laserska moč: 4.000 W, SHORT-TERM AVAILABILITY: TRUMPF Trumatic L 3030 – 4 kW – Year 2006 TECHNICAL DATA: Manufacturer: TRUMPF Model: L 3030 – 4 kW Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness, mild steel: 20 mm Max. sheet thickness, stainless steel: 15 mm Max. sheet thickness, aluminium: 10 mm Operating hours: NC The machine has been regularly serviced by TRUMPF! Transmitting tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: CO2 laser TLF 2000, high-frequency excited, maintenance-free turbo radial blower, mirror telescope, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: maintenance-free three-phase servo motors - Quick-change cutting head system - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure regulation - APC capacitive height control and process regulation - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS high-pressure cutting Fedpfxouthz Te Aflopb - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensor technology - Automatic outer sheet edge detection - Programmable power cycles - Microweld - Automatic shut-off - Workspace lighting - Sinumerik 840D control: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, fully enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - 3.5" floppy disk drive - TFT colour screen - Electrical equipment: voltage 400 V / 50 Hz - Paint finish: standard RAL 9002/5010 ADDITIONAL EQUIPMENT: - Laser TLF 4000, including lens monitoring sensor technology - PCS Process Control System

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive combined with linear direct drives - Enclosed beam guidance via fiber optic cable (LLK) Fpedpfxexw Urye Afljb - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit with fully adaptive lens system - Single-cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: Height control and sheet metal edge detection Control - Advanced shop floor programming (TruTops via network access) - Fast reproduction - 17" touch color display - Integrated technology data - Automatic shutdown - Programmable cutting gas/-pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Tele-service via internet - Integrated e-shop Data transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special equipment: • 3001 on TruDisk 4001 • Extended pallet drawer • Dust protection cover plate • Viewing window left • Viewing windows right side • Storage interface • BrightLine Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Stanje: rabljeno, Leto izdelave: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that secures panels and sheets using vacuum pressure. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is fitted with a set of valves that allow switching different table zones on or off, focusing the vacuum in a specific area and optimizing the clamping of small components. Capable of interpolated milling and drilling of composite panels, as well as aluminum, steel, or titanium sheets, and aluminum profiles. Tekna supplies user-friendly software that can be operated by both experienced CNC programmers and users with less experience. TKE 783 is a machining center with 3 controlled axes, designed for interpolated drilling and milling of composite panels, aluminum, steel, or titanium sheets, and aluminum profiles. Technical specification: Fedpfev D A Imjx Aflspb Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Table dimensions: 2010 x 6300 mm Weight: 4842 kg Travel speeds: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: Used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. If you have any additional questions, we will be happy to answer them.

Stanje: rabljeno, TIG Welding Machine L-TEC Type Inverter TIG 200 DC Fodsdzqb Ejpfx Aflspb TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 A = 60% duty cycle 155 A = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Power connection: 400 Volt, 50 Hz, 32 Amp. plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot pedal) - gas pressure regulator - DC only - HF ignition Required space (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Otherwise, in good condition.

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Fpjdpjvxwkfsfx Afljb Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.