3-valjni hidravlični stroji za valjanje pločevine

KK-Industries CY3R-HHS 160-15/8.0

Stanje: rabljeno, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb Itodpfx Afe Dvlij Tsb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Haltearme links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing Itedpjd Ab H Hjfx Af Teb • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 106 h, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: triplex, moč: 185 kW (251,53 KM), vrsta prenosa: samodejen, dolžina vilic: 3.000 mm, barva: rdeča, Transmission: Hydrodynamic powershift, 3 gears, automatic Year of manufacture: 2023 Unladen weight: 46,760 kg Lifting capacity: 33,000 kg Height: 370 cm CE marking: yes Technical condition: very good Visual condition: very good KALMAR DCG 330-12 FORKLIFT TRUCK TRIPLEX FULL FREE LIFT FORK SHAFT SYSTEM 33,000KG AT 120CM LOAD CENTER SHORT WHEELBASE = 475CM Isdpfx Afov Hn D Ej Totb FORK LENGTH = 300CM, WIDTH = 30CM, THICKNESS = 11CM FRONT AND REAR VIEW CAMERAS TIRE PRESSURE CONTROL SYSTEM CENTRAL LUBRICATION LED PACKAGE CHASSIS / BODY: - Towing pin - Steps with anti-slip protection - Rearview mirrors mounted left and right on the front fenders - Robust and protective fenders CABIN: - EGO cabin - Clear, toughened safety glass windows, thickness 6 mm - Clear windows including sliding windows in left and right doors - Full-size doors with locks on both sides - Complete operation system on right console including light controls, rotary control for display, levers for load handling system (electric adjustable, 2-way) - Multifunction lever left, including horn and indicators - Brake pedal system left and right - Interior comfort: mirrors, handles, interior lighting, etc. - Front/rear and roof window wipers and washers - Hydraulic steering, steering wheel adjustable electrically in height, manually in reach and rake, with steering knob - External reversing lights - Tilting cab - Foot grip, left - Automatic heating and ventilation (ECH) with fresh air filter - Cruise control pedal right - Kalmar standard key system - Cup holder - Coat hook - Color display: fuel level, indicator, engine and transmission temperature, engine oil pressure, battery voltage, clock and date, operating hours counter, service time indicator, speed, engine RPM, pop-up information, AdBlue display STEERING SYSTEM: - Kalmar steering axle including double-acting steering cylinder DRIVELINE: - Axletech drive axle HYDRAULICS: - Electric servo - Sight glass on hydraulic oil tank - Variable displacement pumps - High-pressure filter - Automatic engine speed increase when using load handling function - Standard tilt angles 5F/10B ELECTRICAL SYSTEM: - 24V electrical system - Rear lights and brake lights, LED - Work lights on the front fenders, LED - 2 x mast work lights - Indicators including hazard flashers, LED - Master switch TIRES: - Michelin 16.00x25

Stanje: novo, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10,600 kg Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar Bending performance: 13.0 mm » with 3x top roll diameter Pre-bending: 10.0 mm » with 1.5x top roll diameter Top roll diameter: 270 mm Lower roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of the top and bottom rolls via planetary gear • Digital readout for side roll positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic lower roll adjustment via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment in accordance with CE directives See catalogue via the following link:       Isdpfx Aod Ab H Ief Totb Important notes for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must exceed 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Dolžina pločevine: 3100 Debelina pločevine: 13 Upogibanje: 10 Skupna potrebna moč: 15 Teža približno: 10 Dimenzije (DxŠxV): 4,88x1,16x1,18 Slika podobna Premer valja (zgoraj/spodaj): Ø270 mm Dolžina upogibanja: 3.100 mm Največja debelina pločevine za običajno upogibanje: 13 mm Največja debelina pločevine za pred-upogibanje: 10 mm Pred-upogibanje / Upogibanje: 8 mm / 10 mm (glede na polmer Ød × 1,5) CE-standard Spremenljiva hitrost Krmilna enota – 7-palčni zaslon na dotik Stožčasto upogibanje Induktivno kaljeni valji Pozicioniranje stranskih valjev preko elektronsko sinhroniziranega PLC Spodnji valj trdno mehansko sinhroniziran Varnostni mehanizem za varjenje na stroju Itsded Ab H Ejpfx Af Tjb Ograja za sprostitev napetosti iz jeklene konstrukcije Ležajni valji Hidravlično odpiranje zgornjega valja Zgornji in spodnji valji poganjani s hidravličnim motorjem in planetnim menjalnikom Električna in hidravlična zaščita pred preobremenitvijo Hidravlično nastavljiv pritisk spodnjih valjev

Stanje: rabljeno, DESCRIPTION: STRAPPING MACHINE Item: D-2225-Strapex-MarcoPolo Iodpfeq Dafpsx Af Totb Professional and high-performance strapping machine from a renowned European manufacturer, with internal frame – engineered for high-speed and reliable operation. Equipped with an ergonomic and straightforward tape-threading system as well as a quick-change strap coil system. Model: Marco Polo Aperture: 550 mm x 500 mm 2 identical units available

Leto izdelave: 2021, Stanje: novo, Curb weight: 3,450 kg Iedpfx Aspa Rt Usf Tjtb Suitable for: Construction machinery Cargo capacity: 3,000 l

Leto izdelave: 2025, Stanje: novo, The RM 250 rotor mill is ideally suited for comminuting soft and medium-hard samples such as chemicals, charcoal, limestone, ceramics (porous), coal, chalk, sulphur, citric acid, sugar, titanium shavings, tire wire, glass and many more! max. feed size* Itodpfx Afef Ulibj Teb

Stanje: novo, Sheet thickness: 8 mm | Bending length: 2100 mm | Top roll diameter: 190 mm Technical specifications: Isdpfx Aed Ab Siof Tstb - Hardened and polished rollers - Complete body made of ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated - Mobile control console - In compliance with CE standards Options: - Variable rotation speed: EUR 4,109 - Material feeding table (1000x2000 mm): EUR 2,600 - Oil cooler: EUR 1,040 - Central support: EUR 6,250 - Side supports: EUR 3,600 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Leto izdelave: 2022, Stanje: novo, Primerno za uporabo za: gradbene stroje Isdpfx Asn Tm Dxef Totb