Hidravlični stroji za valjanje pločevine s 4 valji

KK-Industries CY4R-HHS 190-20/8.0

Stanje: novo, Pre-bending: 13.0 mm Working length: 3100 mm Plate thickness: 16.0 mm Total power requirement: 17.5 kW Approx. weight: 11,600 kg Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm Dkedpjd Auacofx Aflsg » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Maximum opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes on cone rolling: • The maximum sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Stanje: rabljeno, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Haltearme links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung Dkedpfs Dvlisx Afleg

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length Djdpjd Ab H Hofx Afljkg • Hardened rolls are recommended

Leto izdelave: 2024, Stanje: novo, Bending capacity: 6 mm Pre-bending: 5 mm Bending capacity: 6 mm Pre-bending: 5 mm Bending length: 2,030 mm Roll diameter: 170 mm Motor power: 4 kW Dkedjftdh Ispfx Aflog Length: 3,600 mm Width: 1,020 mm Height: 1,120 mm Weight: 2,400 kg The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Additional machines are available for demonstration at our location in Staufenberg. Further information is available upon request.

Stanje: dober (rabljeno), Technical Data: Working length: 2100 mm Maximum bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roll diameter: 200 mm Bottom roll diameter: 180 mm Number of driven rolls: 3 Hydraulic drop-end bearing Cone bending device Extended rolls for section bending Control panel with digital display Motor power: 5.5 kW Djdpfx Aewchn Uoflekg CE marking Dimensions (L x W x H): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several sets of rolls for pipe and section rolling The seller is not liable for typographical or data transmission errors. The machine is in visual and technical condition, and wear consistent with its age; used machines are sold without any warranty.

Stanje: novo, Ostas 3-Roll Plate Bending Machine SMR-S 2070 x 190 Technical Specifications: Special features included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (LxWxH): 3750 x 920 x 1260 mm Motor: 4 kW Equipment: - Upper and lower rolls electrically driven - Swing-out upper roll - Conical bending device Dedpeg Nz T Iofx Aflskg - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety wire, CE mark

Stanje: skoraj kot novo (rabljeno), 2-stebni hidravlični stiskalnik Pritisk: 200 t Zgornji hod: 500 mm Spodnji hod: 200 mm Dksdpfxsghl N Uj Afleg Skupne mere: 1800x2200x3700 mm Moč: 10 KM Teža: 8,4 t

Stanje: novo, Leto izdelave: 2025, - Capacity: 700 x 2 mm - Conical rolling - Removable upper roll - Foot control - Emergency stop - Documentation - 400V Dkjdpfx Afsihv Hpslsg

Stanje: novo, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10,600 kg Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar Bending performance: 13.0 mm » with 3x top roll diameter Pre-bending: 10.0 mm » with 1.5x top roll diameter Top roll diameter: 270 mm Lower roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm Djdpfx Aod Ab H Ieflskg • Fully hydraulic drive of the top and bottom rolls via planetary gear • Digital readout for side roll positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic lower roll adjustment via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment in accordance with CE directives See catalogue via the following link:       Important notes for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must exceed 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Sheet width 1290 mm Sheet thickness 5 mm Pre-bending yes Roll diameter 120 mm Rolling speed 1–6 m/min Total power requirement 1.1 kW Machine weight approx. 825 kg Three-roll plate bending machine with asymmetric roll arrangement, enabling pre-bending. New machine equipped with emergency stop wire, brake motor, foot-operated reversing switch, crowned rolls, adjustment of lower and bending roll via handwheel and worm gear, drive of upper and lower roll via worm gear motor, infinitely variable rolling speed by inverter, swiveling top roll. Swedish quality product. This new machine is also available in the following sizes: Working length: from 1040 to 2540 mm Max. sheet thickness (400 N/mm²): from 1 to 6.5 mm Optional extras include: conical bending device (image 2), digital display (image 4), motorized adjustment (image 5) with remote control (image 3), and hardened rolls. Accessory prices + VAT: + Hardened and ground rolls = EUR 2,650 Dkodpfxevzhgps Aflsg + Digital display per axis = EUR 1,050 + Conical bending device with diagonal adjustment of bending roll, sliding shoe and handwheel with display = EUR 1,500 + Motorized adjustment for adjustment roll = EUR 3,550 + Motorized adjustment for lower roll = EUR 3,550 STOCKING DEALER WITH 1,600 m² SHOWROOM.