Holzkraft Rla 160 - Sofort Verfügbar - nakup rabljenega (7.551)

Stanje: novo, Leto izdelave: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures edge processing in every stage, as it comes equipped with all the components you need for your requirements: pre-milling unit, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing unit. For even greater flexibility to achieve the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Ppedpfx Aslht Hwja Dst Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and with adhesive application to the workpiece for edge material up to 3 mm; pre-milling unit (incl. diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change system including glue discharge device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination design), corner rounding unit, radius scraper, flat scraper (including pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change system for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge F5/27. Nesting for milling unit and radius scraper F5/30. Pneumatic 3-point adjustment (for radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in week 4 -

Stanje: novo, Leto izdelave: 2025, Rojek Panel Saw PF 350 Industrial Version The machine design incorporates numerous technical innovations that enhance the functionality and usability of this panel saw. Its high-quality workmanship places it among the best in its class. The machine comes standard with an aluminum sliding table CV 360T, featuring a highly precise and securely mounted guide on hardened rails. Optional equipment includes the robust multi-chamber aluminum sliding table CV 400T, offering a very rigid construction and precision assembly with steel bar mounting. Sliding table size: 400 x 3200 mm. Precision and reliability are assured by the heavy-duty swivel segment guidance of the sawing mechanism within the rugged cast iron body, as well as a separate scoring unit with its own motor. TECHNICAL SPECIFICATIONS Saw Motor power S6 40%: 7.5 kW/3×400 V Motor speed: 2,870 rpm Max. saw blade diameter with scorer: Ø 350 mm Spindle diameter: 30 mm (1″) Saw blade spindle speed: 4,450 rpm Max. cutting height: 120 mm (83 mm at 45°) Saw blade tilt: 0° to 45° Max. cutting width: 1,300 mm Scoring unit Motor power: 0.75 kW (1 kW) Blade diameter: Ø 120 mm (100 mm) Spindle diameter: Ø 20 mm Speed: 8,530 rpm Machine dimensions Length: 3,355 mm Width: 3,450 mm Table height: 892 mm Max. machine height: 1,460 mm Table size: 1,185 x 500 mm Extraction port diameter: 100 + 100 mm Podpfx Asn D Arhja Djpt Gross weight: 680 kg Net weight: 675 kg Aluminum Sliding Table CV360T Table size: 3,200 x 360 mm Support frame size: 1,240 x 650 mm Cutting length: 3,200 mm Power supply protection: 16 A (25 A) Noise level (without technology): 81.8 dB(A) Noise level (with technology): 85.3 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, Glue application machine / Glue roller machine Brand: ORMA/Osama Type: I/213 (S2R-1300) Working width: 1,300 mm Max. clearance height: 100 mm Speed: 18 m/min Working height: 900 mm Application roller diameter: 185 mm Connected load: 0.5 Hp, 0.37 kW Operator side: right Electrics: 400 V / 50 Hz / 3 phase Technical features: Pedpfxed Iz Dfs Aa Dopt - Frame of the glue application machine made from welded steel plate. - 1 motor for driving the two rollers - Glue application rollers covered with special acid-resistant rubber, precision-ground and grooved, abrasion-resistant. - The thick rubber layer can be re-ground several times. - Special dampers on the roller supports allow for automatic opening of the rollers to compensate for workpiece irregularities up to max. 5 mm. - Glue dosing via zinc-coated distribution tray, easily removable for cleaning. - 1 handwheel for adjusting roller opening - Roller safety guard for operator protection - Electrical components meet the highest quality standards - CE conformity

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead Ppsdpfx Ajqlckpsa Djt The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Schneider Compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard equipped with all safety fittings, including power cable with plug and Condor pressure switch Compressed air tank equipped with safety valve, tank pressure gauge, and condensate drain valve Welded rear handle improves loading and transport capability Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch High-grade features for universal applications With V-belt drive, 2 inline cylinders for especially smooth operation, and 400 V three-phase motor with external motor protection Low compressor speed—protects compressor components, reduces noise level, and minimizes vibrations Large fan flywheel ensures optimal cooling Includes filter pressure regulator for controlled compressed air that is cleaned of condensate, dirt, and oil Supplied with 2 m device cord with rubber sheath and air outlet via quick coupling Device cord with phase inverter 10-year warranty on tank against rust-through Technical Data Pressure: 10 bar Intake capacity: 510 l/min Filling capacity: 390 l/min Speed: 1240 rpm Tank volume: 90 L Weight: 80 kg Noise level: 97 dB(A) Dimensions (WxDxH): 1070x495x895 mm Motor power: 3.0 kW Voltage: 400 V Location: Ex stock Bitburg Ppedpfxsbyhvre Aa Djt Subject to prior sale

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Ex-demonstration unit – as new Available at a special price Technical data 300-P: Inlet diameter: 300 mm Rated motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Ppsdpfxjcdrzdj Aa Det Max. air flow rate: 6,000 m³/h Rated air flow rate: 5,089 m³/h Vacuum: 2,280 Pa Filter surface area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Location: Ex-stock Bitburg Subject to prior sale.

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure optimally prepared workpieces for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. The F 2 can also optionally be equipped with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready to operate in 3.5 minutes Features: Ppsdpfslht Hzjx Aa Dst F2 - 10 m/min feed speed F2 next edge banding machine With PLC control (including touchscreen) and automatic glue application to the workpiece for edge material up to 3 mm; jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change ready system including glue draining unit, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), robust chain feed, ball-bearing mounted double pressure rollers, viewing window at the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Stanje: novo, Leto izdelave: 2025, The Hebrock F 2 Podpfxji Am U Do Aa Dept The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with all the features you need to achieve perfect edges right from the start: diamond-tipped jointing cutters ensure that workpieces are excellently prepared for edging. Standard equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change reservoir system including glue drainage device, high-frequency end trimming saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable insert cutter (combination version), robust chain feed, ball bearing mounted double roller top pressure, inspection window from the rear of the machine, extendable workpiece support, feed approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush milling)

Stanje: novo, Leto izdelave: 2025, Technical Data: Suction capacity: 510 l/min. Pedpfx Aehk Dfksa Dopt Filling capacity: 400 l/min. Max. pressure: 10 bar Tank volume: 90 l Cylinders/Stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: The universal compressor with V-belt drive and high-quality features – especially suitable for craftsmen. Designed for use where compressed air quality, durability, and efficiency are essential. Long service life thanks to high-performance units with low speed. Safe transport and excellent stability due to large wheels with parking brake. Optimal cooling provided by a large fan wheel. Aftercooler with cooling fins ensures low entry temperature into the tank, resulting in reduced moisture in the compressed air. Improved efficiency thanks to optimized units. Standard equipment includes: Condor pressure switch Pressure gauge Pressure regulator with water separator and Rectus quick coupling Motor with overload protection Location: In stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Pedelht H Eopfx Aa Dspt Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Low-noise, slow-running WL 4/18.5 kW Pedpfx Aaebtnfto Dspt Technical specifications: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of blades: 28 pcs Blades: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration elements Second blade row Log spacer (self-cleaning hopper) Top configuration Location: Ex stock Bitburg - immediately available - special price

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Low-noise & slow-running WL 4/18.5 kW Technical Data: Psdpebunq Hofx Aa Djpt Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of knives: 28 pcs Knives: 40 x 40 mm concave Screen perforation: 15/20 mm Includes: Control cabinet Electric control system Star-delta starter Rubber oscillating elements Second row of knives Log spacer (self-cleaning hopper) Location: 54634 Bitburg Immediately available

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, AL-KO clean air dust extractor Exhibition unit Offered at a special price Technical Data Power Unit 250 P Suction connection: 250 mm Motor nominal output: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Nominal air flow rate: 3,524 m³/h Psdpfx Aaecdr Ens Dept Vacuum: 2,451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: Warehouse 54634 Bitburg Subject to prior sale

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” Ppjdpfx Aefig Rwsa Dot The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. Pjdpfsu I R Utex Aa Dspt It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their versatile applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction particularly with bulky materials. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. This hopper can be customized to individual requirements and guarantees continuous and economical material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Podpfeh Eiw Iex Aa Dopt Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80–120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting inserts Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration mounts - V-rotor (patented) with milled knife holders in profile - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Available from stock in 54634 Bitburg - Immediately available - Request more information

Stanje: novo, Leto izdelave: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our Machine Concept WL 6 Weima high-performance shredders, with their flexible range of applications, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction of bulky materials in the process. Operating Principle: Psdjh Hnp Djpfx Aa Dopt The machine is equipped with a large feed hopper and can be loaded either via a conveyor belt or manually. This hopper can be tailored to individual requirements and guarantees continuous and cost-effective material infeed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Rotor working width: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Includes: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber anti-vibration mounts - V-rotor (patented) with profile-milled knife pockets - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second row of knives Available ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Podpfxov Erkas Aa Djpt Some of the options shown in the photos are not included in the offer.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Super special price, as this unit was run at our in-house exhibition. Operating hours: 1 Immediately available – subject to prior sale. Once it's gone, it's gone! Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. A key feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Pedpfx Aajtnz Tto Djpt Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with wear-resistant, chrome-plated jaws - Pre-compactor with end-position dampened cylinder and bolted cover - Control panel with PLC control system Hydraulic system: - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and gear motor Screw conveyor channel with discharge screw and gear motor Accessories: - Briquette length monitoring - Automatic on/off Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Podpfopgkmwox Aa Dopt Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2026, Weima Shredder / Single-Shaft Shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times in woodworking operations worldwide. The high production numbers of this highly sought-after shredder guarantee reliable, tried-and-tested technology at the best price-performance ratio. The machines are distinguished by their very robust construction, ensuring extremely high durability—even for outdoor use. Intuitive operation thanks to Siemens PLC control with touch display To ensure the electronics are perfectly matched to the machine, we design, build, and wire our control cabinets in-house. We exclusively use high-quality components, such as those from Siemens or Rittal. Intuitive touch interfaces guarantee fast adjustments. Functions such as setting the ram cycle or stop ensure high throughput. The integrated overload protection also prevents machine damage. No material blockages thanks to self-cleaning hopper design The hopper serves several purposes. Material to be shredded is loaded through it—either manually, with machinery, or via conveyor belt. The large opening also makes loading very large parts easy and convenient. Crucial for the shredding process is its special design, rounded at the front to effectively prevent material bridging. Even with bulky pieces, the shredder can self-feed and prevent jams. If required, hopper extensions and lids with gas struts are available. Durable rotor bearings thanks to isolated design A rotor bearing must be exceptionally robust due to the extreme stress during shredding operations. To prevent dust or foreign material from entering the bearing, we have separated it from the machine frame. This also makes it very easy to maintain and accessible. Technical Specifications: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 - Rotor speed (rpm): 80 - 125 - Motor power (kW): 22 - Number of knives: 54 - Available knife sizes (mm): 40 x 40 - Particle size (mm): Podpfx Aajmhh Ids Dopt - Extraction port (mm): 200 - Infeed opening (mm): 1000 x 1250 - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 - Weight (approx. kg): 2200 Accessories: - Second row of knives - Logspacer Location: Arriving at warehouse 54634 Bitburg

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Ppedpfx Ajpq If Dea Det Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Formatna krožna žaga ALTENDORF F 35 Tip 1 - 1000 Top za masivni les - Nova naprava - takoj dobavljiva iz skladišča Bitburg - Moč motorja 7,5 kW, 400 V, 50 Hz, 3 hitrosti Motorizirano dviganje in nagibanje Velik zaščitni pokrov Dvojni voziček 3.200 mm Priprava za predrezovalec Vzporedno vodilo, širina reza 1.000 mm Kotno-poševni prislon 3.450 mm, brez dolžinskega izravnanja Podaljšanje/razširitev mizne plošče: površina s prašnim premazom Območje nagiba žaginega lista: 0 - 46 ° Dolžina vozička: 3.200 mm Dolžina reza: 3.100 mm Pjdpfx Aoxyl Epja Dopt Širina reza: 1.000 mm Višina reza: 154 mm max. Ø žaginega lista: 450 mm Velikost zaslona: 15 palcev, Višina delovne mize: 910 mm, Priključek sesalnika Ø: 80 + 120 mm Vključene možnosti: M45102 Vzporedno vodilo 1000 mm Digit_X Lokacija: iz zaloge 54634 Bitburg - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, A thoroughly reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium extraction volumes, or an ideal complement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter surface area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional: type-tested rotary valve (FSA) • Tested return flow damper Ppsdpfx Aaohkzt Nj Dot • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3 Ph • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h • Negative pressure at rated flow: 2,543 Pa • Inlet diameter: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection container volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: Available from stock, 54634 Bitburg - Immediately available – in stock Subject to prior sale

Stanje: novo, Leto izdelave: 2026, Weima Shredder / Granulator WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used thousands of times in woodworking operations worldwide. The high number of units of this highly sought-after shredder ensures trusted, reliable technology at the best price-performance ratio. The machines are characterized by their highly robust construction, ensuring extremely long service life (even outdoors). Intuitive Operation Thanks to Siemens PLC Control with Touch Display To guarantee the electronics are fully matched to the machine, we design, build, and wire our own control cabinets. We use only high-quality components – for example, from Siemens or Rittal. The intuitive touch interface allows for rapid adjustments. Features such as adjustable pusher stroke and stop enable high throughput. Built-in overload protection prevents damage to the machine. No Bridging Thanks to Self-Clearing Hopper Design The hopper fulfills several functions. It facilitates loading of materials to be shredded – manually, mechanically, or via conveyor. The generously sized opening makes it easy to load even very large pieces. The specially designed, rounded front ensures effective prevention of material bridging. Even with bulky parts, the shredder keeps itself clear. Hopper extensions or lids with gas struts are available upon request. Long-Lasting Rotor Bearings Thanks to Offset Design Rotor bearings must be extremely robust due to the high demands during operation. To prevent dust or foreign materials from entering, we designed the bearing assembly offset from the machine frame. This also improves serviceability and provides easy access. Technical Specifications: - Rotor diameter (mm): 260 - Rotor length (mm): 1000 - Rotor speed (rpm): 80 - 125 - Power (kW): 22 - Number of knives: 54 - Available knife sizes (mm): 40 x 40 - Particle size (mm): - Discharge port (mm): 200 - Feed opening (mm): 1000 x 1250 - Length (mm): 2045 - Width (mm): 1740 - Height (mm): 1840 - Weight (approx. kg): 2200 Accessories: - Second knife row - Logspacer Location: Ex stock 54634 Bitburg - immediately available - Ppsdpfopdqzxjx Aa Djt