Dräger Dihalni Aparat Na Stisnjen Zrak Zaščita Dihal nakup rabljenega (27.382)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, PROIZVAJALEC HANKINSON TIP HHDP2700 S/N 4001011004 LETO 2011 MOČ (kW) 7 PRETOK (m3/min) 45 TLAK (bar) 16 Crsdpfx Aceyh Uvxo Njc

Stanje: zelo dobro (rabljeno), PROIZVAJALEC AGT TIP VD8/18C PY S/N 7D8-02741 LETO n.d. MOČ (kW) 7 UČINEK (m3/min) 30 TLAK (bar) 16 Codpfx Aceyh Uq No Norc URE (DOK/SKUPAJ) FREKVENČNIK VGRAJEN SUŠILEC R404a

Stanje: novo, Heating capacity: 30 kW Dimensions (L/W/H): 105 cm x 60 cm x 147 cm - NEW - Kanuk Turbo 2 *new design* Hot air furnace incl. heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1,000 m³ Log length: 80 cm Efficiency: 82.4 % Credevxa Itopfx Ac Nsc Flue pipe connection: 150 mm Ref. No.: 2100006

Stanje: novo, - NEW - Kanuk® Original Hot Air Stove Nominal heat output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable room volume: 450 m³ Efficiency: 83.4 % Log length: 48 cm Flue pipe connection: 160 mm Total output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room heating capacity (m³): 450 Flue pipe connection (mm): 160 Flue pipe connection: top / rear Viewing window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Flue gas temperature (°C): 216 Cedpfx Aevwf Rksc Nsrc Log length (cm): 48 Wood consumption (kg/h): 3.9 Flue gas mass flow (g/s): 14.28 Minimum chimney draft (Pa): 16 Flue gas throttle: No Combustion chamber H x W x D (cm): 40 x 44 x 49.5 Ash box: No Design type 1 (self-closing door): Optional Airwash system: Yes BimSchV Level 2: Yes Firewood, wood briquettes: Yes DIN EN number: 13240 Lignite briquettes: No AT §15a B-VG standard: Yes Primary, secondary, tertiary air: Yes CE marking: Yes External air connection (mm): 100 LRV Switzerland: Yes No. 2100102

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating large usable areas, such as production halls and workspaces in craft and industrial businesses. These hot air systems require no lengthy heat-up phases and heat up the workshop, joiner’s or carpenter’s facility, and other production areas within a very short time. Crjdovz Hq Tspfx Ac Nec Solid wood and its by-products, such as solid wood panel offcuts, wood chips, sawdust, pellets, or briquettes, are used as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the requirements for emission values in accordance with the 1st BImSchV. - Automatic and continuous operation modes - Thermal output: 85 kW - Thermal output (Kcal): 73,000 - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Space requirements: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue pipe diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 291 °C - Hot air outlet connectors: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlet are located at the rear, lower part of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 720 x 1000 x 1900 mm Weight: 300 kg Total power requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are the ideal solution for energy utilization in woodworking industry and trade businesses. They have been developed for heating larger spaces, such as workshops and production halls in craft and industrial facilities. These hot air systems require no long heat-up phases and are capable of quickly warming up carpentry or joinery workshops and other production areas. Fuel types include solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree N°459 dated July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both emission stages stipulated by the 1st German Federal Immission Control Ordinance (1. BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output: 43,000 kcal - Fuel consumption: 15 kg/h - Air throughput: 4,900 m³/h - Firebox depth: 650 mm - Loading door: 370 x 350 mm - Hot air fan: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable volume: approx. 1,000 m³ Crjdpfxovz Hq Hj Ac Nsc - Heatable surface: approx. 220 m² - Footprint: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (connector): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney draft: 13 Pa - Flue gas temperature: 290°C - Hot air outlet connections: 2 x Ø 200 mm - For further data, please refer to the attached data sheet. The two air outlet nozzles for the hot air are located at the lower rear of the furnace. A maximum of 20 meters of ducting per outlet is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industry and trade businesses. They are designed for heating large usable areas such as factory halls and workspaces in craft and industrial companies. These hot air systems require no lengthy warm-up phases and can heat production facilities such as carpentry or joinery workshops as well as other workplaces extremely quickly. The fuel can be solid wood and its by-products, such as offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety standards of Directive 89/392/CE. All models of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the exhaust emission limits required by the 1st BImSchV. - Automatic operation and continuous air mode - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Combustion chamber negative pressure: 0.2-0.3 mbar - Draft requirement at nominal load: 0.18 mbar - Heatable volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Required space: Width 1700 mm, Depth 2000 mm, Height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connector): 300 mm - Recommended chimney diameter: 350 mm - Efficiency: 85-90% Cedevz Hqyjpfx Ac Nerc - Flue draft: 11.5 Pa - Flue gas temperature: 289 °C - Hot air outlet sockets: 2 x Ø 450 mm - For more technical data, please refer to the attached data sheet The two pipe connectors for the hot air outlets are located on the rear of the furnace in the lower section. A maximum of 20 meters of pipe per connector is permitted for air distribution. Longer pipe runs are possible on request and with the manufacturer’s approval. Please contact us for further information.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 600 x 800 x 1900 mm Weight 230 kg Total power requirement 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and trade businesses. These units are designed for heating larger utility areas, such as workshops and workspaces in craft and industrial facilities. Crsdpfx Acevz Hqto Nsc These hot air systems do not require long heat-up phases and can heat the workshop, joinery, carpentry hall, or other production sites in a very short time. Solid wood and its by-products can be used as fuel, including solid wood panel remnants, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations of Directive 89/392 EEC. All hot air furnaces in the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 meet both stages of the 1st German Federal Immission Control Ordinance (BImSchV) regarding required emission limits. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox vacuum: 0.2–0.3 mbar - Required flue draft at rated output: 0.18 mbar - Heatable volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90 % - Chimney pressure: 11 Pa - Flue gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further details, please refer to the attached data sheet The two pipe connections for the hot air outlets are located at the rear of the furnace in the lower section. A maximum of 20 meters of ducting per pipe connection is permitted for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total Power Requirement: 0.5 kW Warm Air Furnace MARTINA 30 The MARTINA warm air furnaces provide an ideal solution for energy utilization in wood-processing industrial and craft businesses. These units are designed for heating large working areas such as workshops and workspaces in trade and industrial settings. These warm air systems require no lengthy heat-up phases and heat up joinery or carpentry shops as well as other production facilities in a very short time. Fuel materials include solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and the safety requirements set out in EC Directive 89/392. All warm air furnaces in the MARTINA series—15, 30, 55, 85, 120, 180, 240, and 350—meet both emission limit stages as required by the 1st BImSchV. Codevz Hqmopfx Ac Njrc - Automatic and continuous operation modes - Thermal output: 29.8 kW - Thermal output: 25,700 kcal - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Nominal draft requirement: 0.18 mbar - Heatable room volume: approx. 600 m³ - Heatable floor area: approx. 120 m² - Required space: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connection): 160 mm - Chimney diameter (guideline): 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connectors: 2 x Ø 200 mm - For further data, please refer to the attached data sheet The two outlet connectors for the warm air are located at the lower rear of the furnace. A maximum pipe length of 20 meters per outlet is permissible for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (LxWxH): 1300x1700x2550 mm Weight: 1200 kg Total power requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed to heat large usable areas such as workshops and working spaces in both craft and industrial settings. These hot air systems require no lengthy heat-up phases and are able to quickly warm carpentry or joinery halls and other production facilities. Solid wood and its by-products, such as remnants of solid wood panels, chips, sawdust, pellets, or briquettes, can be used as fuels. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety regulations from Directive 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the required emission values under the 1st BImSchV. - Automatic operation and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 Kcal - Fuel consumption: 50 kg/h - Air delivery: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V Crodpfxovz Hqgs Ac Nsc - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space requirement: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Chimney diameter (reference): 300 mm - Efficiency: 85-90% - Chimney pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet nozzles: 2 x Ø 450 mm - For further technical data, please refer to the attached data sheet. The 2 outlet nozzles for the heated air are located at the rear, in the lower part of the furnace. A maximum length of 20 meters of duct is permitted per outlet for air distribution.

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Hot Air Furnace MARTINA 120 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft enterprises. Designed for heating larger operational areas such as factory halls and workshops in both craft and industrial sectors, these hot air systems require no long heat-up phases and can quickly warm up carpentry or joinery shops and other production facilities. Solid wood and its by-products, e.g., solid wood panel offcuts, chips, sawdust, pellets, or briquettes, serve as fuel material. The MARTINA hot air ovens comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the equipment safety directive 89/392 CE. All hot air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of the emission limits required by the 1st BImSchV. Crsdpfx Acsvz Hhxe Nsc - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air flow rate: 9,000 m³/h - Combustion chamber depth: 950 mm - Charging door: 460 x 440 mm - Hot air blower: 1.05 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft required at rated output: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Space requirement: width 800 mm, depth 1170 mm, height 2300 mm - Weight: 650 kg - Flue pipe diameter (spigot): 200 mm - Chimney diameter (recommended): 250 mm - Efficiency: 85–90 % - Chimney draft pressure: 16 Pa - Flue gas temperature: 287 °C - Hot air outlet nozzles: 2 x Ø 220 mm - For further specifications, please refer to the attached data sheet The two pipe nozzles for hot air output are located at the lower rear side of the furnace. A maximum of 20 meters of ducting per nozzle is allowed for air distribution.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 1.000 m³/h, skupna širina: 1.020 mm, skupna dolžina: 1.680 mm, skupna višina: 2.460 mm, skupna masa: 1.540 kg, obratovalni tlak: 10 letvica, vhodna napetost: 400 V, moč: 14,2 kW (19,31 KM), One (1) heat-regenerating compressed air adsorption dryer. The dryer was in operation from 2014 to 2017. The unit has been out of service since 2017. Credpfx Aor A El Eoc Njc The compressed air was supplied by an oil-free Atlas Copco ZR3 compressor with 132 kW power. Manufacturer: Donaldson Filtration Deutschland GmbH Model: HRS 1000 Year of manufacture: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions (L x W x H): 1680 mm / 1020 mm / 2460 mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated alumina Desiccant middle (40 cm): 2 mm activated alumina Desiccant top (remaining to the top): silica gel beads The dryer has already been dismantled and is available immediately. The desiccant was vacuumed from the vessel and sorted by type in airtight bags. The desiccant is still in a usable condition; it is not oiled or contaminated. External re-drying of the desiccant is possible. TÜV has inspected the vessels internally and an expert opinion is currently being prepared. “Loose deposits at the lower part of the dished head” (photos to follow).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, PROD. DONALDSON TIP DC0550AB S/N 200020860 LETO 2020 Csdpfoxyaursx Ac Nsrc MOČ (kW) 1,11 KAPACITETA (m3/min) 9,17 TLAK (bar) 14 URE (DOC/SKUPNO) FREKVENČNI PRETVORNIK VGRAJEN SUŠILEC R407C 1,15kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, PROD. DONALDSON TIP DC0450AB S/N 150011899 LETO 2015 MOČ (kW) 0,8 PRETOK (m3/min) 7,5 TLAK (bar) 14 URE (DOK/SKUPNO) FREKVENČNI PRETVORNIK VGRADEN SUŠILEC R407C 1,15kg Cjdpfx Acexyauxe Norc IZMENJEVALEC TOPLOTE HLADILNO (ZRAK/VODA) NA REZERVOARJU DOKUMENTI ne PRIKLJUČEK 2 NOVO/RABLJENO RABLJENO

Leto izdelave: 1980, stanje: pripravljen za uporabo (rabljen), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of manufacture: 1980, operating pressure: 7 bar, test pressure: 9.1 bar, operating temperature: 20°C, medium: compressed air, capacity: 5,300 liters. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15,000 liters, operating pressure: 4 ATÜ, test pressure: 5.2 ATÜ. An on-site inspection is possible. Codpfx Aceumwg Es Nerc

Stanje: rabljeno, Rezervoar za stisnjen zrak, tlačna posoda KAESER Tovarniška št.: 481127K Leto izdelave: 2001 Prostornina rezervoarja: 1000 litrov Obratovalni tlak: 11 barov - Tlačna posoda vroče cinkana - 3 priključne spojke z navojem 2" - 2 priključni spojki z navojem 1 1/2" - 3 priključne spojke z navojem 1/2" - 2 majhni čistilni odprtini - 3 krogelni ventili - 1 varnostni ventil - Manometer za tlak - 2 žerjavna ušesa na vrhu rezervoarja Premer rezervoarja: cca 800 mm Skupna višina: 2300 mm z nosilcem (brez priključkov) Teža: 230 kg Cjdpfexpqzuox Ac Njrc Dobro ohranjen

Stanje: rabljeno, Compressed air – adsorption dryer, activated carbon adsorber with afterfilter BOGE type DAZ 5-2 For especially dry air Serial no. 38315449 Year of manufacture: 2013 Maximum flow rate: 250 liters/min = 15 m³/h Maximum operating pressure: 16 bar Connection thread: G 1/4" Mains connection: 230 Volt, 50 Hz Csdpfovrkhksx Ac Njrc - Pre- and afterfilter Space requirement (L x W x H): 400 x 210 x 580 mm Weight: 15 kg Good condition

Leto izdelave: 2026, stanje: novo, Ogrevanje jekla in/ali sušenje sena ter naprave in kabine za sušenje sena, montaža v kontejnerje plug and play (takoj pripravljeno za uporabo, tudi za najem), vgradnja v kontejner(je) ali na lokaciji v Švici in Avstriji ali južni Nemčiji. Moč od 80 kW do 500 kW in po dogovoru več kot 500 kW. Toplozračni grelniki na zalogi – novi in rabljeni! Csdpfx Acskytn He Nerc Peletni grelnik 200 kW 19.000 m3/h – povprašajte za ugodne cene!! * Rabljeno!!! Na zalogi 1x 200 kW v kontejnerju s 3-tonskim zalogovnikom * Novo!!! Na zalogi 2x 200 kW s peletnim gorilcem Lanox.eu Nizozemska

Stanje: dober (rabljeno), Leto izdelave: 1998, Compressed air tank, pressure vessel, pressure tank, air receiver, pressure cylinder, compressor tank - Manufacturer: Maschinen- und Behälterbau, vertical compressed air vessel - Capacity: 3000 l Codpfjphun Eox Ac Nerc - Operating pressure: 11 bar - Accessories: incl. attached parts, see photos - Dimensions: Ø 1475 x 2760 mm - Weight: 700 kg

Stanje: rabljeno, Leto izdelave: 2009, Overview This complete compressed air system was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The system comprises two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD refrigerant dryer, and one Donaldson UFA-AC0016 oil separator. Designed for reliable and energy-efficient air supply with up to 8.5 bar, this system is ideal for continuous production environments. The system has been regularly serviced, with the most recent comprehensive maintenance completed in August 2025, and is in good operating condition. The entire installation remains connected and operational and is available immediately for inspection and sale. Technical specifications - Year of manufacture: 2009 - 2013 - Application: Industrial compressed air system Cedpfx Acjxrc Ace Nsrc - Total capacity: 2 × 24.1 m³/min - Maximum pressure: 8.5 bar - Power consumption: 274.8 kW Scope of supply - Compressor | Atlas Copco | GA132 VSD | 2013 - Compressor | Atlas Copco | GA132 VSD | 2012 - Refrigerant dryer | Atlas Copco | FD160 VSD | 2012 - Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009

Stanje: dober (rabljeno), Rezervoar za stisnjen zrak, tlačna posoda, tlačni rezervoar, posoda za stisnjen zrak, kompresorski rezervoar, hranilnik stisnjenega zraka -Proizvajalec: Elektra-Beckum, rezervoar/hranilnik stisnjenega zraka -Prostornina: 150 L -Delovni tlak: 11 bar Credsya Dfijpfx Ac Nsc -Dimenzije: 1460/510/H530 mm -Teža: 92 kg

Leto izdelave: 2026, stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and lifetime of compressed air systems. Cedpfxsmt Dcxs Ac Norc The refrigerated dryer has been engineered for maximum efficiency and durability. The main construction components include: 1. Air-to-air heat exchanger In the first stage of the process, inlet air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the use of counterflow, heat recovery enhances the overall energy efficiency of the system. 2. Refrigeration system evaporator In the second stage, the compressed air enters the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture enters an efficient separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system The variable-speed fan technology enables intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Flow capacity: 7,000 l/min Power: 1.37 kW Supply voltage: 230 V Dimensions (L x W x H): 1000 x 550 x 920 mm Weight: 95 kg Refrigerant type and quantity: R410a, 900 g

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, A refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the downstream air flow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigerated air dryer is engineered for maximum efficiency and durability. Key design elements include: 1. Air-to-air heat exchanger In the first stage of operation, the inlet air passes through a heat exchanger, where it is pre-cooled by the colder air leaving the evaporator. The use of a counter-flow setup enhances heat recovery and improves the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This process results in condensation of the water vapor and oil particles contained in the air. 3. Condensate separator After cooling, the gas and condensate mixture is directed to a high-efficiency separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable speed fan technology allows intelligent adjustment of cooling intensity according to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1 1/2" Maximum operating pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 3,800 l/min Power: 0.9 kW Supply voltage: 230 V Dimensions (L x W x H): 850 x 480 x 480 mm Weight: 59 kg Crjdemt Dcqspfx Ac Nsc Refrigerant type and quantity: R410a, 650 g

Leto izdelave: 2026, stanje: novo, The refrigerated compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigerated dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machinery, or finished products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigerated dryer has been engineered for maximum efficiency and durability. The main design components include: 1. Air-to-air heat exchanger In the first stage, the incoming air passes through the heat exchanger, where it is pre-cooled by the colder air exiting the evaporator. Thanks to the counterflow operation, heat recovery increases the overall energy efficiency of the system. Cjdomt Dbhspfx Ac Njrc 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to a dew point temperature of 3°C. This condenses the contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture goes to a highly efficient separator, where condensate is separated and automatically discharged from the device. 4. Fan control system Variable-speed fan technology allows for intelligent adjustment of cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/Outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 1500 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 380 x 600 x 625 mm Weight: 31 kg Refrigerant type and amount: R134a, 400 g The listed price is NET. Transport costs are not included in the price. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Leto izdelave: 2026, stanje: novo, The refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the flowing air. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or finished products. By eliminating moisture, the dryer increases the reliability and longevity of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. Key construction features include: Codpemt Dcfsfx Ac Nerc 1. Air-to-air heat exchanger In the first stage, the incoming air passes through a heat exchanger where it is pre-cooled by the outgoing air leaving the evaporator. The use of counterflow maximises heat recovery and the overall energy efficiency of the system. 2. Refrigeration circuit evaporator In the second stage, compressed air is routed through the evaporator, where it is cooled to the dew point temperature of 3°C. This results in condensation of water vapour and oil particles present in the air. 3. Condensate separator After cooling, the gas-condensate mixture is directed to a high-efficiency separator, where condensate is separated and automatically discharged outside the unit. 4. Fan control system Variable-speed fan technology enables intelligent adjustment of cooling intensity to match actual demand, reducing energy consumption and increasing component lifespan. Technical specifications: Inlet/outlet pipe diameter (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 2800 l/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L x W x H): 420 x 700 x 690 mm Weight: 37 kg Type and amount of refrigerant: R134a, 550 g