Demag Pesto Motorja 24/14K4P nakup rabljenega (14.174)

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of manufacture: 2007 Clamping Unit Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4750 kg Additional Information: Technology that convinces in terms of energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced fully electric drive technology to the plastics injection molding sector in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is activated only when actual movement is required. This fundamental difference enables 50 – 70% energy savings compared to hydraulic machines and significantly reduces annual operating costs. Motor System — Siemens MOTICS 3 Main drive motor · water-cooled servomotor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · water-cooled servomotor This motor, also based on the Siemens MOTICS 3 platform, plasticizes the material with precise speed and torque control to achieve a homogeneous melt; the water-cooled design ensures stable operation during long-term, intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servomotors. Clamping, injection, screw retraction, ejector, and plasticizing are all fully servo-driven. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. Csdpfx Aozabkvjkrsrc NC4 Control System The button-based NC4 system manages all machine parameters—including injection profile, mold protection, and cycle analysis—from a single screen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech 80-310 Compact Schließkraft: 80 Tonnen Baujahr: 1995 Holmenabstand: 400 x 400 mm Codpfx Akowav Htjrorc Schneckendurchmesser: 40 mm Schussgewicht: 196 g

Stanje: rabljeno, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase linear-rotor motor DEMAG Type: KBA 125 B Motor no. 3926599 Speed: 915 rpm Motor power: 4.7 kW Mains connection: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement in direct drive 1 unit three-phase linear-rotor motor DEMAG Type: KBA 80 A Motor no. 3926599 Speed: 1360 rpm Motor power: 0.83 kW Mains connection: 400 Volt, 50 Hz - Brake disconnects via armature thrust movement when driving - When stationary, the brake operates via the reduction gearbox on the motor - Output speed via the gearbox: 174 rpm Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no. 13926599 Input speed: 1360 rpm Output speed: 174 rpm Csdpfx Aoy N D E Aekrjrc Gear ratio: i = 7.8 Output shaft via motor rotor: Ø 32 mm Shaft stub length: 80 mm Pilot diameter on motor: Ø 125 mm Bolt circle diameter on motor: Ø 150 mm / 4xM12 internal thread Dimensions LxWxH: 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dvižna višina: 2.000 mm, nosilnost: 1.500 kg, Prodam vrtljiv žerjav z verižnim vitlom Demag, višina stebra je 286 cm, dolžina roke od vrtljivega čepa 320 cm. Crjdpfsymv T Sex Akrjc

Stanje: zelo dobro (rabljeno), DEMAG verižni dvigalo Tip PK 2 N-F Dvižne hitrosti: 10 in 2,5 m/min Cjdpsy Sldlsfx Akrorc 380 V 0,5 kW Pogon vozička: 380 V 0,5 kW

Stanje: rabljeno, Leto izdelave: 1978, Doseg 5.500 mm Nosilnost 250 kg Višina 3.800 mm Dvižna višina 3.800 mm Številka žerjava 1.30 Tehnični podatki so podatki proizvajalca ali upravljavca in so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; izključno veljajo naše poslovne in prodajne pogoje. O nas več kot 400 lastnih strojev na zalogi več kot 15.000 m² skladiščnih površin, žerjavna zmogljivost 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, nas kontaktirajte. Crodpfx Akeyqvliorsc Dodatne ponudbe najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Ekipa Markus Hirsch

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Concept 125/475-320 Zatezna sila: 125 ton Crodpfxsxd Sz Es Akroc 2 x izvleki jedra na premičnih ploščah + Robot Demag W621-1831: X-550, Y-1000, Z-2000 (2004)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 3.000 kN, skupna masa: 13.900 kg, Ta 5-osni DEMAG ERGOTECH CONCEPT 3000-1450 je bila izdelana leta 2001. Ima zapiralno silo 3000 kN in maso stroja 13,9 ton. Z maksimalnim hidravličnim tlakom 190 bar in pretokom 164 l/min je ta stroj zasnovan za učinkovito delovanje. Če iščete visokokakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju DEMAG ERGOTECH CONCEPT 3000-1450, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. Cjdpfjy Icikex Akrsrc • Maks. hidravlični tlak: 190 bar • Maks. pretok: 164 l/min • Skupni tok: 181 A • Tok ogrevanja: 102 A • Pogonski tok: 79 A • Krmilni tok: 67 A • Obratovalna napetost: 400 V • Frekvenca: 50 Hz • Certifikat: CE

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Weight: 5,500 kg Additional Information & Extras Core pull: 1 unit Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection moulding machines, developed specifically for technical plastic parts, automotive applications, electronic components, and demanding serial production. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements as well as ejector functions are fully electric, ensuring highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% up to 80% can be achieved depending on the application. At the same time, the reduced heat generation lowers the cooling demand and reduces overall operating costs. The machine features a direct servo injection and metering system, enabling very short response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plastification and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Crjdpfey Ub D Tex Akroc Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series is still among the most sought-after all-electric injection moulding machines on the market.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Crodpfxey Ub D Hs Akrjc Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is among the highly precise, all-electric injection moulding machines, specifically developed for technical plastic components, automotive applications, electronic parts, and demanding high-volume production runs. All main machine movements are driven by direct-drive servo-electric motors. Injection, dosing, mould movement, and ejector functions are carried out entirely electrically, enabling maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly noted for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. Lower heat generation simultaneously reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, which allows very fast response times and provides highly precise injection control. The injection unit comes with 4 heating zones for homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key benefits of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume production runs Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Csdpfx Akjy Ub Dtjrorc Clamping force: 100 tons Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2,180 bar Dimensions and Weight Machine dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series comprises high-precision, all-electric injection moulding machines specifically designed for technical plastic components, automotive applications, electronic parts, and demanding mass-production runs. All major machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector operations are executed fully electrically, allowing for maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is especially valued for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the minimal heat generation reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo-driven injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features four heating zones, ensuring homogeneous plasticizing and stable process conditions, particularly with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Minimal maintenance requirements * Clean production environment * Ideal for technical and precision parts * Suitable for high-speed series production Due to their long service life, stable production performance, and high energy efficiency, Sumitomo Demag IntElect machines remain among the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2012, Ref. No.: 18610 Manufacturer: DEMAG Model: IntElect 160/520-340 NC5 All Electric Year of manufacture: 2012 Clamping Unit Clamping force: 160 t Opening stroke: 495 mm Tie bar spacing (h x v): 520 x 520 mm Min. mould height: 275 mm Max. mould height: 585 mm Platen size (h x v): 760 x 785 mm Crsdpjy Ub Dmjfx Akrsc Injection Unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight (PS): 139 g Injection pressure: 2180 bar Dimensions and Weights Dimensions LxWxH: 5.4 x 1.5 x 2.1 m Machine weight: 7,600 kg Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the range of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components as well as demanding series production. All primary machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements, and ejection functions are executed fully electrically, ensuring maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. At the same time, reduced heat generation lowers cooling requirements and cuts overall operating costs. The machine features a direct servo injection and dosing system, allowing for extremely fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticizing and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * Highly dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed series production Due to its long service life, stable production performance and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Csdjyz Tmyopfx Akrsrc Premer vijaka: 50 mm Premer vijaka 2: 22 mm Razdalja med stebri V: 580 mm Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični 2x hidravlični ventil

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, nosilnost: 125 kg, globina grla: 6.000 mm, Naprodaj je galgenski žerjav znamke Demag (Demag Cranes & Components GmbH), tip D-AS270. Žerjav je popolnoma funkcionalen in takoj pripravljen za uporabo. Tehnični podatki: Leto izdelave: 07/2003 Nosilnost: 125 kg Izpust: 6 m Kot vrtenja: 270 ° Po želji se lahko organizira transport in nakladanje za doplačilo, po vsej Evropi. Cene so navedene brez DDV. Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam z veseljem pomaga. Možen je tudi odkup ali menjava! Codpfx Asy Dqmpekrorc Odkup / prodaja strojev NAKUP / PRODAJA PROIZVODNIH IN KOVINSKOOBDELOVALNIH STROJEV TER OSTALO. Potrebujete kakovosten, a cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali pa želite svojega prodati? Za več informacij ali kontakt nas obiščite na naši spletni strani.

Stanje: skoraj kot novo (rabljeno), obratovalne ure: 57.410 h, Stroj za brizganje plastike- brez robota. Crsdpfxowxb Dbj Akrec Clamping unit 35/320 Available KW 35 -2025 Year: 2008 Working hours: 125433 Pump working hours: 57410 Clamping Force / Locking Force [kN] 350/350 Max. mould opening stroke [mm] 350 Mould height Min./WA211 [mm] 180/230/280 Daylight between platens max./enl. [mm] 530/580/630 Mould platen (h x v) [mm] 460x450 Distance between tie bars (h x v) [mm] 320x320 Min. permissible mould diameter (k) [mm] 160 Max mould weight / mov. platen [kg] 440/330 Ejection stroke std./enlarged [mm] 100 Ejection / Retraction force [kN] 33/13 Injection unit 35 Screw diameter [mm] 22 L/D ratio 20 Spec. injection pressure (up to 400°C) [bar] 1570 Cylinder head volume, max. [cm³] 34 Max. shot weight (PS, PE*) [g] 30 Net weight (without oil) 4) [~kg] 2620

Stanje: rabljeno, Leto izdelave: 2000, Overview This complete hot-fill line for still beverages/juices was custom-assembled by the previous operator and operated reliably until the end. The line is designed for the preparation, heating, filling, cooling, and packaging of products such as juice and similar beverages. It includes systems for thermal pre-treatment, filling, post-cooling, and final packaging. The line is still installed and can be inspected on site at any time. Technical Data Capacity: approx. 3,500 – 6,000 bottles/hour (filling section) Formats: 0.7 l / 1.0 l / 0.5 l / 1.5 l Application: Hot filling of juice and still beverages Configuration: Heating/pasteurization system (based on a plate heat exchanger) Rotary filler with 28 filling valves and 4 capping heads Cooling tunnel with 3 zones Manual depalletizing crane system Rotary bottle rinser Carton erecting and closing machine Utilities: Compressed air, power supply Scope of Delivery Depalletizing crane system | DEMAG | Manual depalletizing of layers with air-cushion gripper system Bottle rinser | FIMER | Rotary rinser with conveyor system Filling monoblock | MAG Schymanski | BETTA 28/4 | 2000 | 28 filling valves / 4 capping heads, hot filling Cooling system | 3-zone cooling tunnel with spray system Plate heat exchanger | GEA | Integrated cooling circuit Supply tank | Speidel | Atmospheric tank Pasteurization system | API Schmidt-Bretten | Plate heat exchanger-based heating system Carton erecting unit | BORTOLINKEMO | F.O.C. 23/30 | 1993 | Automatic carton erecting unit Carton sealing machine | BORTOLIN | Hot melt carton sealing Adhesive application system | Nordson | Series 3400 | Hot melt system Conveyor systems | Various transport conveyors Csdpfxey Rmfbo Akrsrc

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Stroj Sumitomo DEMAG Systec 120/470-600 NC 5, letnik 2008, s krmiljenjem NC 5, polžem 45 mm, prostornino vbrizga 323 ccm / 294 g, zapiralno silo 1200 kN, razmak med vodili 470 mm x 470 mm, minimalna višina orodja 150 mm, maksimalna razdalja med ploščama 850 mm (900 / 950 z WA), hod odpiranja orodja 800 mm, hod izmetalca 180 mm. Stroj je trenutno v prenovi in se testira za delovanje. Crjdpey Tcu Dsfx Akrsc

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 18565 Manufacturer: DEMAG Model: 150-610, System NC4 Year of manufacture: 2005 Cjdpfjxhfuaox Akrsrc Clamping unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 500 x 500 mm Minimum mould height: 250 mm Daylight opening: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Shot volume: 323 cm³ Shot weight (PS): 290 g Injection pressure: 1,973 bar Dimensions and weight Dimensions (L x W x H): 5.45 x 1.63 x 2.1 m Machine weight: 7,500 kg Robot Brand: Wittmann Model: W721-0231 Year of manufacture: 2005 Additional information: The hydraulic injection moulding machine of the Demag Ergotech System Series is a suitable plastics injection moulding machine for technical plastic parts as well as for automated series production. Thanks to its hydraulic drive system, the machine delivers powerful and stable injection performance, while the Demag NC4 control enables precise process management. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot data: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 2,000 mm Thanks to the robotic system, fully-automatic part removal, conveyor belt transfer, and automated series production are possible. Additionally, 2 complete spare plasticizing units / injection units (screw and barrel assemblies) are available. The machine was used reliably and without malfunctions in ongoing production until it was dismantled.

Stanje: zelo dobro (rabljeno), Verižni dvigalo DEMAG Tip PK 5 Nosilnost 1000 kg Csdpfey I Ulkex Akrjrc Dvižna višina 4 metre Hitrost dviga 7,5 m/min Skupna dolžina 700 mm 380 V 1,4 kW Leto izdelave 1967 Stanje zelo dobro, uporabljen le občasno. Možnost testiranja na kraju samem. Transportne mere: Dolžina 700 mm Širina 400 mm Višina 320 mm Teža 60 kg

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Ergotech Extra 500-200 (2004) Csdpsyyzuvsfx Akrjrc

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag ergotech sys 50-200 (1992) Codpfx Ajyyztfekrjrc

Stanje: dober (rabljeno), Leto izdelave: 2006, Demag systec 160/520-430 (2010) Crodjyyzpyepfx Akrjc

Stanje: dober (rabljeno), Leto izdelave: 2003, Demag Ergotech Extra 800-430 (2003) Cedoyyzi Hjpfx Akrerc

Stanje: rabljeno, Električni verižno dvigalo, elektro dvižna naprava, žerjav DEMAG Tip PK 2 N Tov. št.: 2033985 Leto izdelave: 1973 Nosilnost: 500 kg Dvižna višina kljuke: 15 metrov Crsdpfsy E T Dmex Akroc Hitrost dviga: 5 m/min - 2 nosilni verigi v dobrem stanju

Stanje: rabljeno, Leto izdelave: 2005, Demag extra 50-200 Cjdsyypm Tspfx Akrorc