18621

DEMAG IntElect 100/470-180 NC5 All Electric

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Weight: 5,500 kg Additional Information & Extras Core pull: 1 unit Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection moulding machines, developed specifically for technical plastic parts, automotive applications, electronic components, and demanding serial production. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements as well as ejector functions are fully electric, ensuring highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% up to 80% can be achieved depending on the application. At the same time, the reduced heat generation lowers the cooling demand and reduces overall operating costs. The machine features a direct servo injection and metering system, enabling very short response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plastification and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology Bjdpfx Aksy Ub D Torodc * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series is still among the most sought-after all-electric injection moulding machines on the market.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. distance between platens 2,080 mm Bdodpfjwy U E Ujx Akroc Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electro-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2,180 bar Dimensions and Weight Machine dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: Bdsdpfsy Ub Dtex Akrjc The Sumitomo (SHI) Demag IntElect series comprises high-precision, all-electric injection moulding machines specifically designed for technical plastic components, automotive applications, electronic parts, and demanding mass-production runs. All major machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector operations are executed fully electrically, allowing for maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is especially valued for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the minimal heat generation reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo-driven injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features four heating zones, ensuring homogeneous plasticizing and stable process conditions, particularly with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Minimal maintenance requirements * Clean production environment * Ideal for technical and precision parts * Suitable for high-speed series production Due to their long service life, stable production performance, and high energy efficiency, Sumitomo Demag IntElect machines remain among the most sought-after all-electric injection moulding machines on the market today.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Bdodpfox D Eccox Akrsc Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 35.000 h, vpenjalna sila: 100 kN, delovna prostornina: 51 cm³, tlak vbrizgavanja: 2.800 letvica, skupna masa: 5.000 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Bedpjwlkb Nefx Akrsdc Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Demag Concept 100/420-200 Leto izdelave: 2007 Enota za brizganje: Bodpfxox Uqb Ie Akrjdc Premer polža: 25 mm Tlak brizganja: 2752 bar Prostornina hoda: 61,3 cm3 Teža brizga (PS): 54 g Najv. dozirna pot: 125 mm Enota za zapiranje: Zapiralna sila: 1000 kN Najv. hod odpiranja: 500 mm Min. vgradna višina orodja: 250 mm Najv. razdalja med pritrdilnimi ploščami: 750 mm Pritrdilne plošče: 600 x 600 mm Svetla razdalja med stebri: 420 x 420 mm Najv. teža orodja: 700 kg Oprema: Jedro vlečenja: 2x Ogrevanje orodja: 6x Zračni ventil: 1x Vmesnik za robota Stroj se dobavlja z robotom

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Screw diameter: 45 mm Shot weight in polystyrene: 149 g/PS Bdodpfx Akjwvkgmjrec Clamping force: 1250 kN 9302423 INJECTION MOLDING MACHINE, DEMAG MATERIAL HANDLING, Year of manufacture: 1999 9307836 TEMPERING DEVICE, PIOVAN GMBH GARCHING, THW9, Year of manufacture: 2011 784065 TEMPERATURE CONTROL UNIT, PLASTIC SERVICE GMBH, HRS 24I, Year of manufacture: 2003

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Stroj Sumitomo DEMAG Systec 120/470-600 NC 5, letnik 2008, s krmiljenjem NC 5, polžem 45 mm, prostornino vbrizga 323 ccm / 294 g, zapiralno silo 1200 kN, razmak med vodili 470 mm x 470 mm, minimalna višina orodja 150 mm, maksimalna razdalja med ploščama 850 mm (900 / 950 z WA), hod odpiranja orodja 800 mm, hod izmetalca 180 mm. Stroj je trenutno v prenovi in se testira za delovanje. Bodpfx Aksy Tcu Dsredc

Stanje: rabljeno, Leto izdelave: 2005, vpenjalna sila: 110 kN, delovna prostornina: 398 cm³, tlak vbrizgavanja: 1.550 letvica, skupna masa: 5.700 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Bdodpfx Aksymqzqjrsc Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 4.200 kN, odmični hod: 710 mm, skupna dolžina: 7.900 mm, skupna širina: 2.200 mm, skupna višina: 2.500 mm, skupna masa: 21.000 kg, število vbrizgov: 2, moč: 68 kW (92,45 KM), Demag Ergotech 420/800 2300 with embossing function and Wittmann DR 633/CNC 6-316 robot Prices and further inventory at inventar-verkauf.de/id/alesco Additionally, two injection units are included; one of these has been used exclusively for clear glass applications. Details: Clamping force: 4200 kN Tie bar spacing: 800 x 710 mm Mold opening stroke: 710 mm Control system: Ergocontrol NC 4 Connected load: 68 kW Overall dimensions (LxWxH): 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Bdsdpfoy U Nkbox Akrec Equipment/Accessories: Wittmann Robot DR 633/CNC 6-316 (XxYxZ) 900 x 1600 x 3000 mm, servo with support and enclosure 2-core pull circuits 2 I/Os Embossing function retrofitted 2 x Injection Units: Injection Unit 1: Shot volume: 891 cm³ Shot weight: 800 g (polystyrene) Screw diameter: 60 mm Injection pressure: 2420 bar Injection Unit 2: Shot volume: 1212 cm³ Shot weight: 1090 g (polystyrene) Screw diameter: 70 mm Injection pressure: 1877 bar WITHOUT KOCH material loader and clamping devices. If you have any questions or require further information, please feel free to send us a message or give us a call.