Stroj za brizganje do 5000 KN

DEMAG Ergotech 1250-610

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine with robot and rotary table Manufacturer: ARBURG Hfodpfx Abeu E E Suj Eod Model: 470S1100-400/290 Year of manufacture: 2017 Clamping force: 110 tons Tie bar spacing: 420 x 420 mm Min./max. mould installation height: 450 mm Opening stroke: 950 mm Screw diameter 1: 35 mm Max. shot volume: 154 cm³ Injection moulded part weight: 141 g/PS Screw diameter 2: 30 mm Shot volume: 106 cm³ Injection moulded part weight: 97 g/PS Control system: SELGOCIA Equipment: - 3 core pulls - Vertical injection unit - Rotary table - 6-axis robot, manufacturer: KUKA, model: KR 16 Wikut, year: 2010 - Conveyor belt - Safety fence

Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 74.900 h, vpenjalna sila: 850 kN, premer vijaka: 40 mm, skupna masa: 3.700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Hjdpfor Hrqrox Ab Eofd Central computer, handling equipment, blow-off, diverter gate, core pull 1 hydraulic, mould temperature control 3 units. The machine comes with the following accessories, etc.: Complete 50-series thermoplast injection unit, selector valve, hydraulic infeed conveyor (height-adjustable, 3 levels) (integrated in control), external floppy disk drive (original Arburg), documentation and machine service reports from Arburg Service, machine setting CMD training materials (folder), electrical diagram, documents also available in digital form, oil filling (must be pumped into a container prior to transport; pump is available), electronic water manifold.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Hfjdeva H Amepfx Ab Eed Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Stanje: rabljeno, Leto izdelave: 2021, vpenjalna sila: 120 kN, delovna prostornina: 36 cm³, tlak vbrizgavanja: 2.200 letvica, skupna masa: 5.400 kg, delovne ure: 3.500 h, premer polžastega transporterja: 22 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Hfodoxwy Utspfx Ab Ejd Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electro-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Hfsdpfx Aowy U E Ujb Eed Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Hfodpeuiykdjfx Ab Ejd

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 113 kW (153,64 KM), vrsta hlajenja: voda, skupna masa: 943 kg, skupna širina: 2.100 mm, skupna dolžina: 2.270 mm, skupna višina: 1.330 mm, ogrevalna zmogljivost: 117 kW (159,08 KM), Oprema: kompresor, Rabljeni Carrier 30 RQS 120 z zračno hlajenim hladilnikom / toplotno črpalko na R410A. Popolnoma opremljen s tremi Copeland ZP182KQE-TFD-604 scroll kompresorji, ojačanim toplotnim izmenjevalnikom, Carrier PM 100-110mm ventilatorjem – 50 Hz – 0,53/0,18 kW – 720/500 RPM, Mecasem OOPSG001171100C sprejemnikom s prostornino 23,5 litra in električno krmilno omaro z Carrier Pro-Dialog+ prikazovalnikom. Specifikacije: Blagovna znamka: Carrier Tip: 30 RQS 120 Tip izdelka: Vodni hladilnik / toplotna črpalka Hladilno sredstvo: R410A Teža: 943 kg Dimenzije: 2270x2100x1330 mm (DxŠxV) Kompresorji: 3x Copeland ZP182KQE-TFD-604 Prikazovalnik: Carrier Pro-Dialog+ Število ventilatorjev: 2 Specifikacije ventilatorja: 50 Hz – 0,53/0,18 kW – 720/500 RPM Hfsdpfx Aerlk E Njb Eod Leto izdelave: 2013 Količina na zalogi: 1

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 62.235 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Key technical data: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm Hfedpfx Abevxzw Nj Esd - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal arrangement - Extraction cell with machine enclosure - Carton board feed - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This layout also offers advantages for automation, as robots and peripheral equipment can be integrated more easily. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process management. The servo-hydraulic technology ensures energy-efficient operation and reduces cooling water requirements. Additionally, the machine is fitted with a MORETTO dosing unit and an ENGEL linear handling system, supporting production automation and increasing overall productivity. With a total of 62,235 operating hours, the machine is in used but operational condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 650W500V/200HL. 2F 2-component injection moulding machine • Tie-barless design • 2,000 kN clamping force • Screw diameter unit 1: 45 mm, unit 2: 45 mm • Max. shot volume unit 1: 226 cm³, unit 2: 183 cm³ • Mould dimensions: min. 250 mm, max. 750 mm • Year of manufacture: 1998 Hfedpegrafvofx Ab Eod

Stanje: rabljeno, Leto izdelave: 2017, vpenjalna sila: 550 kN, delovna prostornina: 1.239 cm³, tlak vbrizgavanja: 1.990 letvica, skupna masa: 21.000 kg, delovne ure: 21.636 h, premer polžastega transporterja: 70 mm, Dobavni pogoji: iz lokacije Hfsdpfxox E A Tqj Ab Esd Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto