Linija za polnjenje steklenih steklenic za enkratno uporabo DEMAG, FIMER MAG, GEA, API, Nordson (200

DEMAG, FIMER Abfülllinie für Glasflaschen (Einweg)

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting Lredpfxjhlz S Ne Ah Uol • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, Leto izdelave: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK, and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and covers all major processing steps from depalletizing to palletizing. The labeller will be finalized according to the buyer’s requirements, allowing the system to be tailored to the intended bottle types and product portfolio. This system is suitable for returnable glass beverage applications. Based on the listed machines, the line is set up for crate handling, bottle washing preparation, empty bottle inspection, high-performance filling/capping, and repacking of returnable crates. For bottles with screw caps, the RINK machine can be integrated upstream of the bottle washer; for crown cap bottles, an additional format kit is required as per your note. Technical Data - Capacity: 33,000 bottles/hour - System type: Returnable glass bottling line - Main machine year of manufacture: mostly 1998 or later - Bottle type: Returnable glass bottles - Closure types: Crown cork and screw cap - Packaging type: Beverage crates / returnable plastic crates - Filling system: KRONES isobaric filling block - Special notes: - RINK KM 790/4K-3K QL: only for bottles with screw caps - For crown cap bottles, an appropriate format kit is required - Labelling machine: supplied/completed according to customer requirements Scope of Supply - Depalletizer | Profipack | – | 2006 - Decrater | KRONES | Linapac A-T 1600 | 1998 - Crate washer | Hormes | Crate washer | 1992 - Case opener | RINK | KM 790/4K-3K QL | 2020 - Bottle washer | KRONES | Lavatec-KES | 1998 - Empty bottle inspector | HEUFT | Spectrum TX | 2015 - Filler block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 - Labeller | to be assembled per customer requirements - Crater | KRONES | Linapac F-T 1800 | 1998 - Palletizing system | Profipack | 2006 - Pallet wrapper | Robopack | 2006 - Pallet securing | Vertical strapping | 2006 Additional Information Bottle formats: - 0.25 l single bottle – Ø 57.5 × 215 mm - 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 l ale bottle – Ø 68.5 × 234.5 mm - 0.5 l ale bottle – Ø 68.5 × 270 mm - 0.5 l steinware bottle – Ø 70.5 × 174 mm - 0.5 l Bavaria bottle – Ø 70 × 260 mm Lrodpeytvyfsfx Ah Uol - 0.5 l NRW bottle – Ø 67 × 260 mm - 0.5 l single bottle – Ø 82 × 295 mm - 0.7 l GDB bottle – Ø 79 × 290 mm - 0.75 l GDB bottle – Ø 79 × 290 mm - 1.0 l GDB bottle (lightweight) – Ø 84 × 305 mm - 1.0 l AMG bottle – Ø 83.7 × 298 mm Crate formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Stanje: dober (rabljeno), PLC control, central processing unit, RAM, CPU, central unit, main module - Manufacturer: Siemens, Simatic S5 Central Processing Unit, original packaging Lsdshzc Sajpfx Ah Uorl - Type: 6ES5 943-7UB21 - Carton dimensions: 310/215/H50 mm - Weight: 0.9 kg