Stroj za brizganje

DEMAG

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed Ksdpfsx D Rqrsx Af Todg • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 44.600 h, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljene dvokomponentne brizgalke s robotom Proizvajalec: ARBURG Tip: 570S2200-400/170e² Letnik: 2010 Zapiralna sila: 220 ton Razmik med stebri: 570 x 570 mm Min./maks. montažna višina: 350 mm Odpiralna pot: 1.000 mm Polž DN 1: 35 mm Maks. hodilni volumen: 154 cm³ Teža brizganca: 141 g/PS Polž DN 2: 30 mm Hodilni volumen: 59 cm³ Teža brizganca: 47 g/PS Upravljanje: SELGOCIA Oprema: 3 x jedrne izvlečne palice Kdsdpfxou E E H Sj Af Tsg Vertikalna brizgalna enota 6-osni robot, proizvajalec: KUKA, tip: KR 16 Wikut, letnik: 2010 Transportni trak Zaščitna ograja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. Kdodpfx Aex D Nwqjf Tog • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine depth: 6,600 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Razdalja med stebri (V): 580 mm Razdalja med stebri (H): 580 mm Tip: Horizontalen Pogon: Hidravlični Kdsdpfxjyark Ts Af Tsg

Stanje: zelo dobro (rabljeno), Engel Victory 1350/220 Tech Clamping Force: 220 tonnes Year of Manufacture: 2004 Platen Size (W x H): 860 x 830 mm Screw Diameter: 55 mm (618 cm³) Control System: CC 200 Kdsdpfxopdrpze Af Tog Minimum Tool Installation Height: 250 mm Maximum: 730 mm

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 160 t Premer vijaka: 40 mm Razdalja med stebri V: 520 mm Razdalja med stebri H: 520 mm Tip: Horizontalen Pogon: Hidravlični Ksdoyarfdepfx Af Todg

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Kdedexcbnljpfx Af Teg Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Omrežna priključitev: 380 V, 50 Hz Teža: 20 kg dobro stanje

Stanje: dober (rabljeno), Shrink tunnel from a German manufacturer: - Tunnel opening approximately 500 x 200 mm. - Adjustable temperature up to 250°C and conveyor speed up to 25 m/min. - Option for fixed or rotating central tunnel rods. Kdjdpfjh U A I Rjx Af Teg - Hot air flows at the top and in the middle can be adjusted separately via deflection plates. - Bottom air flow can be switched on separately. - The machine can be moved or locked into position using lockable castors.

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Serial number: 86584 Front tire condition: 70% Kodpswwqbyjfx Af Todg Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Please contact PFEIFER GROUP for further information.

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Zapiralna sila: 280 t Premer polža: 45 mm Teža brizga: 294 g Razdalja med stebri (V): 630 mm Razdalja med stebri (H): 630 mm Prostornina brizga: 323 cm3 Tip: Horizontalen Pogon: Hidravlični Kedpfxjxykw Ro Af Tedg

Stanje: dober (rabljeno), Leto izdelave: 2005, CITIZEN K12 CNC Lathe Automatic TECHNICAL SPECIFICATIONS Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extraction length: 80 mm Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15,000 rpm Max. machining diameter of sub spindle: 12 mm Max. machining length of sub spindle: 40 mm Max. drilling diameter for back machining: 6 mm Max. thread diameter for back machining: M5 Sub spindle speed: 10,000 rpm Tool turret, number of tools: 8 Speed of driven tools: 6,000 rpm X1-axis: 122 mm Z1-axis: 200 mm Kdodpfx Ajvrz H Ref Tsg Z2-axis: 150 mm Weight: 1,950 kg SCOPE OF DELIVERY Includes (list not exhaustive): Citizen K12 CNC automatic lathe Chip tray Transformer Complete operating documentation Exact scope of delivery as per photo documentation We do not accept any liability for the accuracy, completeness or timeliness of the information provided.

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Kdjdswk Aw Hjpfx Af Teg Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, Leto izdelave: 1988, Outreach 2,200 mm Hook height 2,600 mm Machine weight approx. 1.8 t Load capacity 1,000 kg +++++ Please note that the machine is in a disassembled and load-ready condition. For this reason, a powered demonstration or the recording of a video is not possible. Furthermore, our listing contains the most informative and highest quality photos available. Unfortunately, it is not possible to send additional pictures. Kdjdpog N Di Rjfx Af Tjg +++++

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 41.804 h, Used TRUMPF TruMatic 6000 (K01) – medium format Technical Data: Year of manufacture: 2008 Last maintenance: 18/03/2025 Operating hours NC: 41,804 Resonator hours: 14,466 Kdodpfxswkd Efs Af Tsg Beam-on hours: 2,054 Y-axis: 1,300 mm Additional equipment: various tools Recently installed new parts: Conversion to TASC5 laser control (01/2025) Operator panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Stanje: rabljeno, Ročna krmilna enota DEMAG za dvoranski žerjav. Stroški pošiljanja 20 evrov. +++++ Kdsdpfx Ajh Hvgxof Tog Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega prikaz pod napetostjo ali izdelava videa nista mogoča. Poleg tega naša oglas vsebuje najbolj informativne fotografije najboljše možne kvalitete. Pošiljanje dodatnih slik žal ni mogoče. +++++