Prebijalno-laserski stroj

Trumpf TRUMATIC 6000L

Stanje: zelo dobro (rabljeno), Trumpf We are offering a laser and punching machine. Technical specifications: Hedpfx Ajm Ak Huofwjff Power supply: 400V/50 Hz Protection: 3 x 100 A Connected load: 65 kVA Working area X x Y without repositioning Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (incl. 20 kN active stripper): 220 kN Active stripper (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum pass-through height: In punching mode: 35 mm In laser mode: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous strokes: Punching: 900 /min Marking: 2800 /min C-axis: Punching: 60 rpm Thread forming: 330 rpm Tools Tool stations in linear magazine: 19 (with 2 clamps) Number of tools with multitool use: 19 to 190 tools All tools can rotate 360° continuously Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm at all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Position deviation: ± 0.1 mm Mean position scatter: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Specifications, technical data, and information subject to change and error!) We are happy to answer further questions by phone.

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details. Hjdpfskvnumox Afwjff

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 72.918 h, laserska moč: 2.700 W, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, najv. debelina jeklene pločevine: 8 mm, maks. debelina aluminijaste pločevine: 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching operation: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Performance Laser power: 140 – 2,700 W Maximum sheet thickness: 8 mm Cutting capacity (mild steel): 8 mm Cutting capacity (aluminium): 4 mm Cutting capacity (stainless steel): 6 mm Maximum punching force: 220 kN Active hold-down (programmable in steps): 4.5 – 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm Thread forming: 180 rpm Punching stroke rate (E = 1): 900 strokes/min Marking: 2,800 strokes/min Tooling Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 – 5 s Accuracy Positional deviation: ±0.10 mm Average positional scatter: ±0.03 mm Programmable chutes for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: Siemens Sinumerik 840D-based MACHINE DETAILS Laser on-time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Hfodpfxsw Suwye Afwjf Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Leto izdelave: 2006, obratovalne ure: 46.547 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Trumpf TruMatic 6000 L Laser Punching Machine with TrumaLift SheetMaster, ToolMaster, GripMaster, and Scissor Lift Table. SheetMaster: Not only loads and unloads the machine but also reliably sorts the parts. ToolMaster: Automatically changes tools quickly, safely, and conveniently. GripMaster: Reliably moves scrap grids and strips. TECHNICAL DETAILS Working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D Laser power: 3200 watts Sheet thickness for mild steel: max. 8 mm Sheet thickness for stainless steel: max. 8 mm Sheet thickness for aluminum: max. 4 mm Workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Hedpfx Ajn Nxw Dofwoff Punching force: 22 t Max. punching diameter: 76.2 mm C-axis punching: 330 rpm Stroke rate: 450 – 1000 strokes/min Marking stroke rate: 2800 strokes/min MACHINE DETAILS Laser on-time: 46,547 h Cutting time: 23,580 h Length: 7,500 mm Width: 8,100 mm Height: 2,400 mm Weight: 16,000 kg (base machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Leto izdelave: 1993, stanje: rabljeno, Bending length: 3,000 mm Hodpfx Afjkh Niqowoff Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Throat depth: 220 mm Total power requirement: 15 kW Machine weight: 11,000 kg

Leto izdelave: 2025, stanje: novo, Avtomatski podajalnik palet je hrbtenica vaših avtomatizacijskih procesov. Napolnjen je lahko z do 10 euro paletami (1200x800 ali 1200x1200), kar odpravlja potrebo po ročnem pripravljanju posameznih palet, prihranek časa in zmanjšanje fizične obremenitve zaposlenih. Namesto tega enota palete izdaja s pritiskom na gumb ali s prednastavljenim algoritmom na motoriziran valjčni transporter, ki jih transportira za nadaljnjo obdelavo. Model PD-10 se lahko uporablja v povezavi z različnimi rešitvami za paletizacijo. Sprejme do 10 euro palet Polni se z viličarjem Hjdpohbg Uxofx Afweff Zmanjšuje fizično obremenitev Povečuje učinkovitost

Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW Hfedsg Tzbhepfx Afwjf • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 18 t, delovno območje: 30.001.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.600 mm, Zelo dobro vzdrževana in popolnoma servisirana rabljena CNC izsekovalna stiskalnica večjega formata Trumpf 3000 naprodaj Proizvajalec: TRUMPF Tip: TruPunch 3000 (S11) Letnik: 11/2012 Delovno območje: 3000 x 1500 mm - brez ponovnega pozicioniranja Delovni razpon na prečni osi (X): 3000 mm Delovni razpon vzdolž (Y osi): 1600 mm Velik vrat: 1600 mm V celoti z večorodno orodjarsko zmogljivostjo Tip S11 Hsdpfx Afoxrnggjwoff Video na voljo na zahtevo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Pressure: 80.0 t Hfsdsxabnyopfx Afwef Bending length: 2550 mm Frame width: 2130 mm Throat depth: 420 mm Approach speed: 100 mm/sec Working speed: 10.0 mm/sec Return speed: 80.0 mm/sec Stroke: 200 mm Installation height: 470 mm Table width: 60.0 mm Table height: 910 mm Operating hours: approx. 37,102 h Total power requirement: 9.0 kW Machine weight: approx. 5,750 kg Dimensions (L x W x H): 3100 x 2180 x 2540 mm Good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - CNC OPERATEUR controller for 8 axes: X1+X2, Y1+Y2, R1+R2, Z1+Z2 - CNC-controlled backgauge adjustment (X axes) - CNC-controlled vertical adjustment of backgauge fingers (R axes) - CNC-controlled left-right adjustment of backgauge fingers (Z axes) - Mobile two-hand operation & foot pedal - AMADA-type upper die crowning - Various tooling included - CE marking - Side safety guards (hinged doors) - Rear safety guard (hinged door) - 2x emergency-stop buttons on front - Operating manual

Stanje: novo, Timesavers Series 12 WW The machine is equipped with two abrasive belt stations, allowing you to use Station 1 for preliminary grinding—to remove heavy burrs and splatter—and Station 2 to achieve a surface finish on the part. The conveyor carpet transport speed is infinitely adjustable. The table opening can be adjusted from 0.8 to 100 mm. Hsdpfewqf U Uex Afwoff