Converging Conveyor High Speed 240 Volt nakup rabljenega (53.659)

Stanje: rabljeno, Leto izdelave: 1994, Rapid radial drilling machine Donau Danuflex145 Nwsdpfowtq Dyex Ah Ujg

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Nwedjylnpispfx Ah Ujg Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: rabljeno, Leto izdelave: 1997, Pressing force: 315 t Adjustable ram stroke: 30 - 100 mm Ram adjustment: 100 mm Shut height (stroke down, adjustment up): 370 mm Bolster area approx.: 1600 x 1100 mm Ram clamping surface approx.: 1600 x 1100 mm Pass-through opening in bolster: 600 x 180 mm Strokes per minute: 15 - 180 min⁻¹ Bolster height above floor: 1200 mm Power requirement: 170 kW Height above floor approx.: 4900 mm Dimensions LxWxH: 4900 x 1900 x 4900 mm Machine weight approx.: 55 t Standard equipment The press was retrofitted to CE standards in 2015. In 2021, the press control was upgraded to a SIEMENS S7-TIA system. The coil line still uses a SIEMENS S5 controller. Additional equipment Stroke bars in the press table Automation KEMMERICH coil line comprising: Decoiler: load capacity: 5 t Straightener: Roll diameter: 70 mm Nwedpfxsuqd Tmj Ah Ueg Material thickness: 1 – 4.5 mm Strip width: 300 mm Feeder: Roll diameter: 160 mm Feed length: 0.1 – 9,999.9 mm Strip width: 30 – 350 mm Material thickness: 0.2 – 10 mm Material cross-section: 1,500 mm² Feed accuracy: +/- 0.05 mm Loading saddle

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 950 mm, širina mize: 910 mm, stiskalna sila: 80 t, skupna masa: 16.500 kg, prebijalna sila: 80 t, Max. Pressing Force: 80 tonnes / 800 kN Stroke Rate: Max.: 1,000 strokes/min Min.: 100 strokes/min Supply Voltage: 400 V Mains Frequency: 50 Hz, 60 Hz Power Consumption: 43 kW Control Voltage AC: 24 V Compressed Air Connection: 6–10 bar Stroke Adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram Adjustment: 76 mm Average Upper Tool Mass: 600 kg Maximum Tool Width: 970 mm Bolster Table Clamping Area: L–R: 950 mm F–B: 910 mm Ram Clamping Area: L–R: 760 mm F–B: 510 mm Max. Tool Width (L–R): 970 mm Strip Feed Height: Max.: 160 mm Min.: 70 mm Strip Feeder (left) Bruderer BBV 202/120 Max. Strip Width: 202 mm Feed Length: 0–120 mm Table Opening: L–R: 920 mm Nwsdpjxzr Ruefx Ah Ujg F–B: 320 mm Machine Dimensions: Length: 2,834 mm Width: 1,742 mm Height: 3,460 mm Total Weight with 1× BBV 202: approx. 17,500 kg Control Cabinet Dimensions: Length: 1,200 mm Width: 500 mm Height: 1,025 mm Weight: approx. 250 kg The noise protection enclosure is not included in the offer but can be purchased separately. Our stock also includes many other models of Bruderer, Schaal, Mabu, and Bihler presses, as well as decoilers and strip straightening machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Ref.: 11098 . 2005 Muller Martini 'Corona CC-12' EVA / PUR Vysokorychlostní lepička bloků. Vynikající stav! Pouze 36 800 motohodin! Skládá se z: 36 x 3695/24” nakládacích podavačů shora se sekvenčním spouštěním/zastavováním + ruční podávací stanice Řídicí systém kopií 'ASAC' s prvkem vypínání za 3714 Zarovnávací jednotka 3643 a spirálové závodní zařízení 3641 Automaticky motorizované nastavení Muller Martini s řídicím systémem “Commander”. Programovatelný systém s možností ukládání dat, menu-naváděným nastavováním a seřizováním za chodu Přísuvová sekce s přenosovým motorem 25 kW Muller Martini 'Corona CC12-23' s 22 x 23” kombinovanými svorkami Jednotky na přípravu hřbetu s řezáním/frézováním/broušením/čištěním kartáčem Vyměnitelné lepicí jednotky hřbetu, včetně: ICS30 EVA tavné lepidlo – boční předehřívací zásobník 30 l ICS80 EVA tavné lepidlo – hlavní předehřívací zásobník 80 l PUR předehřívací jednotka PUR lepicí jednotka pro hřbet Nedpfx Ahsy Ib S Rs Ujwg EVA tavná lepicí jednotka pro hřbet EVA tavná lepicí jednotka pro boční lepení Pásový podavač obálek s presováním Výstavní skládací dopravník: Plochý pásový dopravní systém (detail na vyžádání): NEOBSAHUJE OŘEZÁVAČ (ořezávací jednotku lze doplnit) Specifikace: 3695/24" sběrač – velikosti složek: Max: 500 x 320 mm Min: 140 x 100 mm CC12/24” lepička – velikost knih: Max: 510 x 305 mm Min: 140 x 100 mm Tloušťka knihy: 3 – 60 mm Otevření svěrky: Max: 80 mm Šířka rozevřených desek: 203 – 642 mm Mechanická rychlost: Max: 12 000 cyklů/hod.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With automatic strip feeder BBV 300/200 600 kN | 100–800 strokes/min | Fully automatic | Swiss premium quality Technical Highlights: Nominal force: 600 kN Strokes per minute: 100–800 Max. feed length: 200 mm Year of manufacture: Unknown (no nameplate) / Function test: 2025 Drive power: 30 HP Control voltage: 24 V AC Power connection: 440 V AC / 50 Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 / 51 / 58 / 64 / 70 / 76 mm Shut height/ram adjustment: 80 mm Working dimensions: Max. tool width: 620 mm Strip width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max. strip width: 300 mm Max. feed pitch: 200 mm Max. material thickness: 6 mm Feed angle: 180° Machine dimensions: Footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Features: BBV 300 feed system – fully synchronized mechanical strip feeder Integrated control cabinet Nwedpfx Asxz Ugxsh Uog Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediately available in Europe Worldwide shipping possible Contact us today for pricing and further technical details. We are happy to assist you in upgrading your production line with Swiss precision technology.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 8.269 h, potovalna razdalja osi X: 550 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 640 HSCI, skupna višina: 2.450 mm, obremenitev mize: 250 kg, skupna masa: 7.200 kg, največja hitrost vretena: 42.000 obr/min, število osi: 5, This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017 and stands out as a robust vertical machining center. It features a high-speed Fisher HSK E40 spindle with speeds of up to 42,000 rpm and a 32-tool magazine. The machine is equipped with a 4/5-axis swiveling rotary table, increasing its versatility for complex machining tasks. Take the opportunity to purchase this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Additional Equipment • 4/5-axis tilting rotary table prepared for pallet system • B-axis tilt range: -120° to +60° • C-axis rotation: 360° • B-axis speed: 25 rpm • C-axis speed: 20 rpm • Cellar dust extraction system • EROWA UPC production chuck clamping system • Laser measurement for tool length and diameter, tool breakage detection • Probe (Renishaw) • Precision Pack III – 5-axis thermal compensation Machine Advantages Technical Machine Advantages • Distance between spindle and table (min/max): 50–450 mm • Table type: fixed dimensions: 650 × 500 mm • T-slots: 5 × 14h12 • Torque (S1/S6 – 60%): 5.9 Nm / 6.7 Nm • Tool magazine capacity: 32 • Max. workpiece size: Ø400 × 380 mm Additional Information ECOTEC energy-saving function Table adapter for 4th and 5th axis HR410 wireless remote control EROWA UPC base chuck with EROWA ITS100 adapter Nwodjyaqf Njpfx Ah Uog Dimensions Machine depth: 2800 mm

Stanje: novo, Leto izdelave: 2025, zmogljivost vrtanja: 40 mm, globina grla: 1.220 mm, hitrost vretena (min.): 110 obr/min, največja hitrost vretena: 2.900 obr/min, skupna masa: 1.710 kg, pomik vretena: 200 mm, nosilec vretena: MK 4, Drilling capacity in St 60: 40 mm Nedpfxstzkmbs Ah Uewg Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Toolholder short spindle: MK 4 Swing (distance spindle center / column) min. - max.: approx. 210 - 1220 mm Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: number x width 3 x 18 mm Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feeds approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / rev Main spindle speed range: infinitely variable 110 - 2900 rpm. Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive power spindle motor 400 V, 50 Hz: approx. 2.2 / 4.0 kW

Leto izdelave: 1985, stanje: skoraj kot novo (rabljeno), Wanzke Hydraulic High-Speed Press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press from Wanzke. This press is in like-new condition! Technical data: Nsdpfx Ahjhgiyij Uowg Manufacturer: Wanzke Model: SP/F 12 Press force: 120 kN Return force: 17.8 kN Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety clearance: 4 mm Accessories: Decoiler GM1

Leto izdelave: 1985, stanje: skoraj kot novo (rabljeno), Wanzke Hydraulic High-Speed Press SP/F12 Double Column Press. -WKG 499- Offered here is a hydraulic high-speed press from Wanzke. This press is in like-new condition! There are 2 presses mounted on one stand. Technical Data: Manufacturer: Wanzke Model: SP/F 12 Pressing force: 120 kN Return force: 17.8 kN Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety distance: 4 mm Strokes/min: Working stroke: 10 mm/sec Rapid traverse: 20 mm/sec Max. stroke: 100 mm Table size: 320 x 300 x 280 mm Accessories: Double decoiler, model GMD1 Digital function control "Tronic press" with full upgradeability to CNC control. A total of 2 units available! Nsdpfxshgiwnj Ah Ujwg

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Vertikalni rezkalni stroj CAMAM mod. FV-1T-1P - v skladu s CE normami Nwjdpsx Rdhtofx Ah Ueg - Napetost: 380/50 - Leto: 1998 - Komplet z navodilom za uporabo in CE izjavo

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina mize: 1.200 mm, širina mize: 500 mm, nosilec vretena: MK 3, vrsta nastavitve višine: električni, Donau DR23 radialni vrtalni stroj – robusten kakovosten stroj Naprodaj je zanesljiv Donau DR23 radialni vrtalni stroj, idealen za delavnico, kovinsko obdelavo ali industrijsko uporabo. Stroj prepriča z robustno zasnovo, visoko natančnostjo in vsestransko uporabo pri vrtanju, povrtavanju in rezanju navojev. Podrobnosti: Proizvajalec: Donau Model: DR23 Radialni vrtalni stroj generalno obnovljen pri Vaumtec Hitromenjalna glava Nedpfxsyrtkxs Ah Uswg Stabilna lita konstrukcija Nastavljiva roka za fleksibilno obdelavo velikih obdelovancev Primeren za jeklo, aluminij in druge kovine Vrtenje v desno in levo

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Nsdoyhdvkepfx Ah Ujwg Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 Nodpfxsu Aa I Sj Ah Uewg GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication Nedeu Dg D Aepfx Ah Uowg • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: • USB

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts Nwsdpfxsrmkfne Ah Ueg – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base Nwjdpfxovv Spks Ah Uog • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 270 mm, pomik po osi Z: 310 mm, hitro pomikanje X-os: 75 m/min, hitri pomik os Y: 75 m/min, hitri pomik na osi Z: 75 m/min, nazivna (navidezna) moč: 17 kVA, skupna višina: 2.300 mm, skupna dolžina: 1.500 mm, skupna širina: 2.600 mm, skupna masa: 3.400 kg, največja hitrost vretena: 30.000 obr/min, nos vretena: HSK40, število mest v zalogovniku orodij: 40, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, CNC obdelovalni center CHIRON FZ 08K S Magnum High Speed Plus (HSP) TEHNIČNE LASTNOSTI: Leto izdelave: 2007 CNC krmiljenje: FANUC 18i-MB5 Število osi: 7 Pomik v osi X: 450 [mm] Pomik v osi Y: 270 [mm] Pomik v osi Z: 310 [mm] Hitrost pomika v oseh X, Y in Z: 75.000 [mm/min] Največji premer palice v vretenu za struženje: 32 [mm] Obseg vrtenja osi A: 360 [°] Natančnost pozicioniranja osi A: 0,001 [°] Obseg nagiba osi B: -20° / +115 [°] Natančnost pozicioniranja osi B: 0,001 [°] Tip vretena: HSK40 Največje število vrtljajev vretena: 30.000 [min⁻¹] Število mest v izmenjevalcu orodij: 40 Njdpfx Aeyq Nyyeh Ujwg Potrebna priključna moč: 17 [kVA] Napajalna napetost: 400 [V] Dimenzije (DxŠxV): 1500 x 2600 x 2300 [mm] Teža: 3.400 [kg] VKLJUČENA OPREMA: x1 sonda za orodja RENISHAW, tip TS27R x1 enota za hlajenje vretena x1 rezervoar za hladilno tekočino x1 naprava za obdelavo 6. strani x1 vpenjalni primež SCHUNK x84 vpenjalnih tulec – tip HSK40 x14 vpenjal – tip F35 x1 klimatska naprava za elektro omaro x1 naprava za izsesavanje oljne megle DONALDSON – tip Torit DCE x1 pištola za izpiranje x1 tribarvna signalna svetilka x1 navodila za uporabo stroja x1 navodila za upravljavca x1 programski priročnik Stroj je mogoče videti pod napetostjo v naših prostorih po predhodnem dogovoru. Cena na zahtevo, nakladanje na tovornjak vključeno. Možnost pošiljanja po celem svetu. Podatki na tej strani so zbrani po naših najboljših močeh, zato ne jamčimo za njihovo popolno točnost. Stroji podobni Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas in Alzmetall, kot tudi CNC rezkalni, vrtalni, navojni in brusilni stroji.

Leto izdelave: 1986, stanje: pripravljen za uporabo (rabljen), BSTA 60 HL, with BBV 202/120 CE certification available Nwsdpeizkmtjfx Ah Usg Contact us!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, stiskalna sila: 60 t, Stroj po naročilu Nedpfx Aexb D Daoh Uowg Avtomatski hitri stiskalni stroj BSTA 60 – prenova / generalna obnova Predelava na električni pogon in nova Unidor PC krmilna enota. Možna razširitev vgradnega prostora za orodja. Za podrobne ponudbe nas kontaktirajte.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, stiskalna sila: 50 t, hod: 51 mm, Bruderer BSTA 50USL, - Miza 1100 mm - Stroj je v prenovi, z novim krmiljenjem - Podajalnik po izbiri: BBV ali servo Nwsdpewu Rrasfx Ah Uog Kontaktirajte nas za podrobno ponudbo!

Leto izdelave: 1983, stanje: rabljeno, Bruderer BSTA 50 HL with BBV 202/120 Available – delivery time upon request CE certification possible Contact us! Njdpfx Ahsizwrle Ujwg

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: nepreverjeno, Bruderer BSTA 50 H with 2x BBV 202/120 Used machine without CE marking Nedpfx Ajuwl Iaeh Ujwg Contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 25 t, Bruderer BSTA 250-75B with BBV 190/85H - B-control system Nodpfswu Sy Ssx Ah Uewg - Table 750 mm - Adjustable stroke 13 to 38 mm - Complete documentation - Soundproof enclosure - Machine tested / overhauled, excellent condition! Contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 19.269 h, Funkcionalnost: popolnoma funkcionalen, BSTA 41, with BBV 2x 202/120 + AS120 Fully overhauled by Bruderer Switzerland in 2007 CE certification possible Nwedpfx Ahjuwlvde Ueg Contact us!