Visokohitrostni radialni vrtalni stroj

DONAU Danuflex 145

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MT 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left sides of the machine base • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill travel mm 220 Column travel mm 450 Distance spindle nose – min. to table top mm 40 Distance spindle nose – max. to table top mm 710 Distance spindle nose – min. to base plate mm 840 Distance spindle nose – max. to base plate mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capacity Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Infinitely variable feed mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Lsdpsyhdvkofx Aacehc Electrical wiring diagram

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Lhedpfju Aa I Sex Aacsc Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel distance 1050 mm • Drilling spindle MT 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm), machine base rear and left each • 3-axis digital readout • Machine lamp • Central lubrication Lhedpfxsx Uwpxo Aacjc • Worktable surface machined all around • Safety guard at drill • Coolant system Dimensions and Travel Ranges Tool holder MT 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle bottom edge - min mm 40 table top edge max. mm 710 Distance spindle bottom edge - min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Worktable height mm 900 Machining Values Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Infinitely variable feed mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagrams Electronic circuit diagram

Stanje: rabljeno, Leto izdelave: 1994, Rapid radial drilling machine Lhodpfewtq Dyox Aacjc Donau Danuflex145

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GLAVNO VRETENO: Vretenasta glava: A2-8 Moč glavnega vretena: 18,5 kW Največja hitrost glavnega vretena: 4.000 obr/min Največja odprtina vretena: 80 mm Največji obdelovalni premer: 366 mm C-os: 0,001 stopinje REVOLVER: Število pozicij: 12 kos Število gnanih orodij: 12 kos Pomik X/Z osi: 280 / 785 mm Pomik Y osi: +/- 50 mm Največja hitrost gnanih orodij: 6.000 obr/min Moč gnanih orodij: 5,5 kW KONJIČEK: Vpenjalni stožec: MK5 Razdalja med konicami: 705 mm ELEKTRIČNA NAPAJANJA: Skupna moč: 39 kVA TEŽA IN MERE: Prostorska zahteva: 3.800 x 2.143 mm Višina stroja: 2.232 mm Teža stroja: 6.100 kg OPREMA: Krmiljenje: MORI MSX-850 II Nastavitev za merjenje orodja Lhodpfx Aaox Rvgzecjc Enota za odjemanje delov Transporter za ostružke Rezervoar za hladilno tekočino Vpenjalni sistemi in gnana orodja

Stanje: dober (rabljeno), Leto izdelave: 2008, V dobrem tehničnem stanju in popolnoma delujoč. Leto izdelave: 2008. Dodatna Y-os: +-60 mm Največja hitrost vretena: 3.000 min-1 Moč vretenskega motorja: 22/18,5 kW Največja hitrost pogonskih orodij: 6.000 min-1 - Vpenjalna glava 300 mm s prehodom 90 mm, vretenjak A2-8 - Povečana moč in navor 25/30 kW, 1.000/1.300 Nm - Premer struženja 420-500 mm Lodpfx Aaexdcigecohc - Dolžina struženja 1.250 mm - C-os, pogonska orodja - NC-konjiček, popolnoma programirljiv, ločen motor - Povečana moč Z-osi - Nov transporter za odrezke

Stanje: rabljeno, Leto izdelave: 2003, NAKAMURA TOME SUPER NTJ CNC-STROJNO STRUŽENJE FABRIKAT: NAKAMURA TOME, JAPAN Lhsdpsv I Tx Refx Aacjc MODEL: SUPER NTJ GODINA PROIZVODNJE: 2003 UPRAVLJANJE: FANUC 18 iT B PREČNIK STEGE: 210,0 mm MAKS. PREČNIK OBRTA: 200,0 mm RASTOJANJE IZMEĐU CENTARA: 780,0 mm PREČNIK POVLAČNE CEVI: 80,0 mm HODOVI: X OSA: 750,0 mm Z OSA: 130,0 mm REVOLVERSKA GLAVA: 2 x 12 POZICIJA BRZINA VRETENA: do 5.000 o/min PROLAZ VRETENA: 65,00 mm PRIRUBNICA VRETENA: A2-6 DODATNO: - CNC KRATKI MAGACINSKI ULAŽIVAČ ŠIPKI - REVOLVERSKI ALAT - TRANSPORTER STRUGOTINE - PRIRUČNICI

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 19.853 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11170000963, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, 5-Achs-Simultanbetrieb Drehzahl: 18.000 U/min Werkzeugwechsler: 60 Plätze / SK 40 DIN69871 Werkzeuge im Preis enthalten IKZ (Innenkühlung) / Blasluft Heidenhain Steuerung 426/430 Lsdpfx Aaowqp Hujcohc

Stanje: rabljeno, Leto izdelave: 2000, Stružnica Mori Seiki SL 200 MC, letnik 2000 Lsdpfxexyvkvs Aacshc

Stanje: skoraj kot novo (rabljeno), Donau Donauflex 135 hitrohodni radialni vrtalni stroj Proizvajalec: Donau Tip: Donauflex 135 Leto izdelave: 2020 Stanje: Zelo dobro, rabljen, a kot nov Ledpfjxcyz Rox Aacshc Takoj na voljo iz zaloge.