Avtomatski stroj za izsekovanje

BRUDERER BSTA 250-75B, BBV 190

Stanje: novo, Leto izdelave: 2025, Tlačna peskalna kabina DSK 11.11.30. Peskalni prostor: širina 1050 mm, globina 1050 mm, višina 955 mm. 1 TÜV-preizkušen tlačni rezervoar 30 l s stožčastim iztočnim lijakom. 1 ventil za doziranje peskalnega sredstva s pnevmatskim uravnavanjem količine. 1 vgrajen zapiralni stožec z vodilno cevjo. 1 priključek za stisnjen zrak s pnevmatskim zapornim ventilom in iztokom za krmilni zrak. 1 regulator tlaka za nastavitev peskalnega tlaka. 1 peskalna cev DN19. 1 ročnik z bor-karbidno Venturi šobo 8 mm. 1 par peskalnih rokavic. Električno nastavljiva višina kabine za ergonomičen položaj telesa. Shranjevanje višinskih položajev v spominu za 3 nastavitve. Filter za odpraševanje 2000 m³/h 2,2 kW. Bljdpoga Ehbsfx Aa Roi

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 0540/98, Funkcionalnost: popolnoma funkcionalen, Proizvodna številka: 0540/98. Leto izdelave: 1998. Kapaciteta: 400 ton. Dolžina hoda: 300 mm. Število hodov: 10–40 / min. Nastavitev drsnika: 300 mm. Bjdpfxoicbbze Aa Rsli Vgradna višina: 700 mm. Dimenzije mize: 1600 x 1300 mm. Neto teža: 45 ton. Odprtina portala: 1600 mm. Zunanje dimenzije: 2 x 3 x 6 metrov. Krmilni sistem: MEAB. Podajalnik / ravnalnik traku: iRON RNE 50B / 11. Odvijalec: iRON SA6000, maks. 700 mm.

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Bledpfx Aofx Hv Hja Roi Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Bledpjt Hw N Tefx Aa Roi Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display - Can be used horizontally / vertically - Foot switch - Emergency stop Blsdpfxogg N Tws Aa Rsi - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Cutting width: 1.3 mm Controller: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Remnant piece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total power requirement: 10.0 kW Bedowm Rm Ispfx Aa Rsli Machine weight: approx. 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: 2500 mm infeed roller conveyor, chip conveyor, coolant system

Stanje: pripravljen za uporabo (rabljen), Further information to follow. Blsdjqzx Dqopfx Aa Rei Accessories: Separator frame (stainless steel) 1200 x 1000, separator drum, motor, tool kit, documentation

Stanje: zelo dobro (rabljeno), Soundproof enclosures. For Bruderer stamping presses. Enclosures available from stock for the following machines: Bsdpfx Asiw Icbsa Rjli BST 25 BST 41 BSTA 50 The enclosures are completely overhauled, carefully dismantled, and packaged for transport. Painted in white and anthracite (or custom colors as per customer request). The enclosure comes with all necessary perforations for easy operation of a Bruderer press. Front and rear doors with inspection window. Air ventilator for climate control mounted on the top cover. For more information, please do not hesitate to contact us. We have Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110 as well as Mabu and Schaal stamping presses in stock.

Stanje: rabljeno, Leto izdelave: 1992, Measuring range X-axis: 2400 mm Measuring range Y-axis: 1200 mm Measuring range Z-axis: 1500 mm Machine weight approx. 9.00 t Bljdpfxsg Er Nlo Aa Roi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, dolžina gredi pod glavo: 30 mm, dolžina odseka (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Year of manufacture: 1970 Blsdpeur N Daefx Aa Rsi The machine is immediately ready for operation!