Hitri radialni vrtalnik

WEYRAUCH SW 40 VE-SL

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Kodpfjrn Riqox Abrjdw Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: novo, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 1250 x 600 mm Cutting capacity at 45°: round 680 mm Cutting capacity at 45°: square 600 mm Ksdpfxofg E Hno Abrsdw Cutting capacity at 45°: flat 870 x 600 mm Cutting capacity at 60°: round 580/550 mm Cutting capacity at 60°: square 530/450 mm Cutting capacity at 60°: flat 550 x 450 mm Saw blade length 8140 x 54 x 1.6 mm Blade speed 15 - 90 m/min Table height 855 mm Total power requirement 7.5 kW Machine weight approx. 5.3 t Space requirements approx. 5.75 x 4.2 x 2.75 m 2-column double mitre band saw designed for high-speed cutting with pusher system P15. Optionally with P30 Hydraulic lowering of the saw frame • NC controlled • Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved using the new "B&S positioning system". An intelligent NC control system ensures smooth interaction between the linear encoder and the self-braking positioning motor in combination with a reliable hydraulic brake by means of large-radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC control CNC control allows the programming of up to 90 cutting programs with different cut lengths, quantities and mitre angles. Dual-side clamping positioning system The B&S pusher system – feed and positioning system – is equipped with "double-sided opening grippers" which are hydraulically operated. This guarantees safe gripping and transport of materials and bundles that deviate slightly from their ideal shape. The pusher system is independently mounted and guided via ball-bearing linear guides, precision ground rack, and a frequency-driven, robust gear motor.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Glavni pogon Število osi: 6 Miza Nosilnost mize: 15 kg Dodatna oprema Ksdpowk Rrxefx Abredw Premium kontrolna plošča z nosilcem za steno in držalom za kable Zunanja naprava za čiščenje plina Nastavljiv elektro-pnevmatski ventil Oprema za podajanje žice Ta 6-osni varilni robot CLOOS QRC 350 QIROX je bil izdelan leta 2016. Odlikuje ga največja nosilnost 15 kg, doseg delovnega mesta 3400 mm in napredni V6 nadzor. Opremljen je z varilnim aparatom Qineo Pulse A s 450A, ki zagotavlja natančno in učinkovito varjenje. Robot vsebuje tudi zaznavalo dotika in obločnega loka za večjo natančnost pri delu. Razmislite o priložnosti za nakup tega varilnega robota CLOOS QRC 350 QIROX. Kontaktirajte nas za več informacij o tej napravi. Vrsta uporabe Varjenje

Stanje: dober (rabljeno), Leto izdelave: 1995, številka stroja/vozila: 9518 202-5, Offer 24361 Technical Specifications: - 3 individually motor-driven rollers, manual and CNC-controlled operation - Max. torque per roller: 1600 Nm - Vertical stroke of bending roller (X-axis): approx. 265 mm - Lower rollers adjustable laterally: 200 – 1000 mm - Shaft diameter: 105 mm - Roller diameter: up to approx. 260 mm - Usable length of standard shafts: approx. 300 mm - Infinitely variable shaft rotation: 1 – 22 rpm - Bending capacity e.g.: - Round tube 1": Ø 350 mm - Round tube 4": Ø 2000 mm - Flat bar 300 x 15: Ø 600 mm - Roller drive: 400 V / 3 x 1.1 kW - Hydraulic drive: 400 V / 3 kW - Weight: approx. 1200 kg - Accessory weight: approx. ... kg - Required space approx.: W 1250 x H 1400 x D 1700 mm - Equipped with: - PC 100 control in separate console - Side straightening rollers adjustable horizontally and vertically - Standard bending set for flat and angle steel Kdsdpfxst Nfv Te Abrow - Roller sets for steel and plastic tubing

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, Kdedpfjm Nbwtex Abrsw RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric inspection with test protocol Accessories: - HEIDENHAIN TNC 124 path control system - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system • For detecting the workpiece position • For determining workpiece reference points • For measuring finished parts • Incl. Weldon chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) • Swivels on 3 axes • Rotatable 360° (displayed digitally in the control as a 4th axis) • Tiltable +/- 30° • Tilt range towards the machine 45° • Tilt range away from the machine 15° • Centering bore Ø 32 mm • Table load capacity 150 kg - Vertical milling head SK 40 • With hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard cabin, movable, electrically secured - Operating instructions Used as seen The machine complies technically with the standards of its year of manufacture.

Leto izdelave: 1998, Stanje: dober (rabljeno), številka stroja/vozila: 3862-8063-564, Offer 23036 Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drill spindle taper: MT 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 400 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 1.6 / 2.9 kW - Space required approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Equipped with: - Thread cutting device Kdedskzg T Rjpfx Abrsw - Hydraulic column and arm clamping - Coolant system - T-slots vertically positioned at the rear of the machine

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, Popolnoma avtomatski ali polavtomatski CNC stroji za krivljenje in žaganje. Velikosti cevi od premera 6,0 do 150,0 mm. CNC stroji za krivljenje, zmanjševanje, žaganje, na voljo tudi po meri. Novi stroji na zalogi za prodajo. Cena v oglasu velja za type60nc stroj za krivljenje cevi premera 2,5 inča. Kodsvl S Dgepfx Abrodw

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.550 kg, vrsta goriva: dizel, barva: rumena, moč: 80 kW (108,77 KM), Izhodni tok: 144 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 80 kW (108,77 KM), nazivna (navidezna) moč: 100 kVA, neprekinjena moč: 80 kW (108,77 KM), neprekinjena (navidezna) moč: 100 kVA, skupna dolžina: 2.900 mm, skupna širina: 1.150 mm, skupna višina: 1.600 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Yunnei EURO 5, vrsta hlajenja: voda, HELVETICA POWER offers: 100 kVA generator with 100% copper alternator, digital control unit, and ATS (Automatic Transfer Switch) for emergency power operation. Oil and water heaters as well as remote control are included. Kedpfomw Unkjx Abrjdw "CE"-certified Yunnei Stage V diesel engine, suitable and approved for continuous operation in compliance with current emission standards. Type Stamford: "CE"-certified, high-quality brushless synchronous alternator with 100% copper winding! Worldwide delivery available (surcharge applies). Optional: Looking for something different? More or less kW, different engine (Cummins, Deutz, Volvo, etc.), larger tank, auxiliary fuel tank – contact us. We can also configure your generator individually to meet your requirements. Collection: At our warehouse in Constance (Germany) or Kefikon (Switzerland, TG). Delivery available. Worldwide shipping possible. Dealer inquiries welcome – contact us! We have various emergency generators (from 7 kW to 100 kW) available immediately from stock in CH/DE. We also offer power generators with STAGE V engines in various sizes available from our warehouses in Switzerland and Germany.

Leto izdelave: 2024, Stanje: novo, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can quickly and precisely position the carriage to the desired location. The specially developed clamping system provides the carriage with very high holding force. Length measurement is carried out using an easy-to-read measuring tape with mm graduations. Existing machines or roller conveyors can be retrofitted at any time. Product details: • Suitable for positioning steel profiles and solid materials • Carriage with triple ball bearings • Smooth operation for fast and precise length positioning • Manual stop clamping via large adjustable hand knob • Specially developed clamping system with very high holding force • Manual raising and lowering of the arm • Measuring rail with tape and nonius scale (resolution 0.10 mm) • Standard measuring lengths: 1m to 6m, maximum up to 20m • Total system length = measuring length + 0.3 m Kjdjidlpiopfx Abrjdw • Available in left- or right-handed version • Mounting screws • Accessories: - Stop arm with spring damping - Manual arm retraction via hand lever - Arm retraction with impact damping via pneumatic cylinder - Various material roller conveyors Plantec Maschinen GmbH

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! Kjdpfef Sqckox Abrodw ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.