Converging Conveyor High Speed 240 Volt nakup rabljenega (54.078)

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: 130861, Pressing force: 50 t Stroke length: 54 mm Ram adjustment: 80 mm Installation height (stroke bottom, adjustment top): 303 mm Isdpfxouqc Hls Agteat Table clamping surface approx.: 810 x 550 mm Strokes per minute: 65 - 400 min⁻¹ Machine weight approx.: 7.5 t Main drive power requirement: 11 kW Standard equipment Additional equipment IMCO pressing force measuring device Automation Gripper feed, type ZR18ZT1 Max. strip width 180 mm Feed length 150 mm

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 120 4687, Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Distance between uprights (L-R): 800 mm Table height above floor: 1150 mm Table clamping area approx.: 780 x 640 mm Ram clamping area approx.: 800 x 460 mm Die opening in table: 690 x 170 mm Strokes per minute: 30 - 300 min-1 Power requirement: 21 kW Height above floor approx.: 2900 mm Machine weight approx.: 12 t Iasdpfxouqc I Ae Agtst Control: Siemens S5 Standard equipment: Roll feeder Type WAV - RDS 2E 1125 Max. strip width: 310 mm Strip thickness: 0.3 - 3 mm Cross-section of strip: 630 mm² Feed speed: 80 m/min Roll diameter: 125 mm

Stanje: rabljeno, Leto izdelave: 1981, številka stroja/vozila: 104680, Pressing force: 45 t Adjustable ram stroke: 10 - 40 mm Ram adjustment: 50 mm Iajdpfx Agjuqcwdetot Installation height (stroke bottom, adjustment top): 220 - 300 mm Distance between uprights (L-R): 560 mm Table clamping surface approx.: 550 x 450 mm Ram clamping surface approx.: 550 x 360 mm Through-hole in table: 450 x 100 mm Strokes per minute: 100 - 500 min-1 Power requirement: 7.5 kW Machine weight approx.: 6.2 t

Stanje: rabljeno, Leto izdelave: 1986, številka stroja/vozila: 131234, Tlačna sila: 63 t Nastavljiv hod batiča: 8 - 60 mm Nastavitev batiča: 80 mm Vgradna višina (bat spodaj, nastavitev zgoraj): 300 mm Pritrdilna površina mize pribl.: 810 x 550 mm Pritrdilna površina batiča pribl.: 700 x 420 mm Prehodna odprtina v mizi: 550 x 140 mm Razdalja med lovilci olja: 700 mm Višina mize nad tlemi: 920 mm Število hodov na minuto: 65 - 400 min-1 Teža stroja pribl.: 8 t Mere DxŠxV: 2935 x 1170 x 3000 mm Potreba po pogonski moči: 11 kW Standardna oprema Dodatna oprema Dvižne letve z kroglicami za menjavo orodja, IMCO merilec tlačne sile Avtomatizacija Grabilni podajalnik, tip ZR 250 Maks. širina traku 250 mm Dolžina podajanja 210 mm Isdpfx Agow Tuqpotoat

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 131 153, Press force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 310 mm Distance between uprights L-R: 820 mm Table clamping surface approx.: 810 x 450 mm Ram clamping surface approx.: 720 x 350 mm Through-hole in table: 600 x 110 mm Strokes per minute: 100 - 1,000 min⁻¹ Table height above floor: 1,030 mm Power requirement: 19.5 kW Machine weight approx.: 6.8 t Iaodpfjuqc Agjx Agtot Additional equipment

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: 150204, Pressing force: 100 t Ram stroke: 300 mm Ram adjustment: 125 mm Shut height (stroke down, adjustment up): 600 mm Distance between uprights L-R: 2,020 mm Distance between uprights lateral: 620 mm Table clamping area approx.: 2,000 x 1,000 mm Ram clamping area approx.: 2,000 x 900 mm Pass-through opening in table: 1,700 x 300 mm Strokes per minute: 10 - 50 min⁻¹ Table height above floor: 1,200 mm Power requirement: 39 kW Height above floor approx.: 4,400 mm Dimensions LxWxH: 5,166 x 2,500 x 4,400 mm Machine weight approx.: 38 t Iodsvmfznopfx Agteat Standard features Electric overload protection SIEMENS S7 control Two-hand operation Optional equipment Automation Schleicher straightening machine (650 mm, max. 2.0 mm) Wanzke decoiler (max. 6t) Helmerding feeder (600 mm, 0.6 - 6.0 mm)

Stanje: rabljeno, Leto izdelave: 1989, Pressure 20 t Total power requirement 20 kW Iodpfx Asvr Hkzogtsat Machine weight approx. 5 t The documentation for this machine is not complete, electrical diagrams are available. The system was in operation until decommissioning. We are selling the machine as a source of spare parts, with warranty and return excluded, free loaded onto a truck with crane, in Soingen.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1976, Work table: 500 mm x 1200 mm Arm travel: 600 mm Tool holder: Morse taper 4 (MT 4) Drilling capacity: 32 mm in steel Tapping device Coolant system Electrics: 24V control voltage Iedpfewnn S Rjx Agtsat Two-channel emergency stop Safety guard at the drill Completely overhauled in 2025 12 months warranty New paint finish RAL 7035 / 7031

Stanje: rabljeno, Leto izdelave: 1991, Delovna miza 600mm x 1200mm Hod roke 600mm Vpenjanje orodja MK 3 Vrtalna zmogljivost 28mm v jeklu Naprava za rezanje navojev Hladilni sistem Dokumentacija Iaedpoxpfgljfx Agtjt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Iaodpfxoxn A Spe Agtot Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: rabljeno, Leto izdelave: 1987, Delovna miza 750mm x 1200mm Iajdpjxpfhvjfx Agtjt Hod pomičnega nosilca 800mm Orodno držalo MK 3 Svedralna zmogljivost 28mm v jeklu Naprava za rezanje navojev Oprema za hlajenje Dokumentacija

Stanje: novo, In stock: CW, XCW & DCW standard/inclined quick coupler weld-on brackets for excavators. Hardox 400. Price incl. VAT: CW00 €36, CW05 €115, CW10 €174, CW20 €335, CW30 €400, CW40 €410, DCW05 €97, DCW10 €190, DCW40 €410, XCW00 €30, XCW05 €100, XCW10 €120, XCW40 €610. Bore diameter 30–60 mm, radius 30–60 mm, distance between bore and hook 150–475 mm. Handelsonderneming Pieper, Nijkerkerstraat 71, 3882 PD Putten (Gelderland). Iaedsf Tny Sspfx Agtot

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: A2536805, stiskalna sila: 40 t, Hidralmac Single-Column Hydraulic Press – 40 t Forge Press – Stroke 250 mm For sale is a Hidralmac single-column hydraulic press (C-frame) with a pressing force of 40 t. The machine is designed for forging, forming, and bending applications and can be newly manufactured to customer specifications. With adjustable speeds, precise position control, and flexible operating modes, it is suitable for both manual setup and automated production processes. ===== Technical Data & Information: Hydraulic Single-Column Press – 40 t ==== General Information - Manufacturer: Hidralmac - Model: Single-Column Press / Forge Press - Construction Type: C-Frame Press - Press Force: 40 t - Production Time: approx. 3 months after receipt of payment ==== Working Area - Open Height: 450 mm - Stroke / Travel: 250 mm ==== Table & Ram - Table Plate: 600 × 650 mm with T-slots - Ram Plate: 500 × 200 mm - Table Cut-Out: 200 × 170 mm - Table Height: 850 mm ==== Speeds - Approach Speed: max. 90 mm/s - Pressing Speed: 10 mm/s Iaedpfjfxyhfox Agtet - Return Speed: max. 90 mm/s - Setup Mode: approx. 9.5 mm/s ==== Hydraulics & Drive - Motor Power: 5.5 kW - Oil Tank: 200 l - Retraction Force: 6.3 t ==== Control & Features - Positioning Accuracy: ± 0.5 mm - Adjustable Hold Time: 0 – 10 s (in 0.1 s increments) - Pressing Pressure Adjustable via Control System - Toggle between Manual and Automatic Operation via Key Switch - Two-Hand Operation for Safe Handling - Sensor-Based Position Control (top dead center, bottom dead center, changeover point) ==== Operating Modes - Manual Setup Mode with Stop at Any Time - Bending Mode via Two-Hand Control - Automatic Mode for Closed Tools - Optionally Usable for Punching, Blanking, and Bending ===== Forging, metal forming, bending, punching operations, hole punching, small batch production, toolmaking Single-column press, C-frame press, forge press, hydraulic press, industrial press, bending press, die set press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Additionally, our presses surpass Canadian and European safety requirements, as they also fully comply with Brazilian national safety directive NR 12, which builds upon these standards. Our core expertise lies in custom machine construction and press automation. We offer bespoke hydraulic presses at remarkably competitive prices. For the hydraulic systems, we mainly use components from leading European manufacturers.

Stanje: novo, The AE-400 SERVO Edging Machine is designed for longitudinal edging and cutting of side boards fed into the machine at high speeds (100-400 m/min). The machine works directly with infeed and outfeed conveyors, allowing for fully automatic operation. The machine is equipped with top and bottom board scanners. The maximum instantaneous output of the edger—up to 50 boards/min—can be achieved when cutting 2.5 m boards to the same width without changing the saw blade spacing. Any adjustment of the edging unit to the board width affects the capacity. Depending on the working configuration, average throughput ranges from 35 to 48 boards per minute. Technical Data No. Parameter Value 1. Spindle drive motor power 55 kW 2. Saw spindle speed 3550 rpm 3. Saw blade diameter 400 mm 4. Maximum cutting height 50 mm 5. Number of saw blades used 2 to 3 pcs. (2 floating saws) 6. Minimum board length 2000 mm Iedpfx Agonygvretoat 7. Maximum incoming material length 6200 mm 8. Maximum number of boards after splitting one board: 2 pcs. 9. Feed speed 100–400 m/min Single board cutting – with two saws (2 floating saws): 1. Minimum saw spacing (board width after splitting) 75 mm 2. Maximum outer saw spacing (board width after splitting) 300 mm Double board cutting – with three saws (2 floating saws): 1. Fixed coupling saw spacing (board width after splitting) 50–100 mm 2. Distance between floating saws (board width after splitting) 50–100 mm 3. Double board cutting minimum 2 x 50 mm 4. Double board cutting maximum 2 x 100 mm Other machine configurations available on request. Made to order. We also manufacture other sawmill lines: log sorting lines, board sorting lines, automatic board stackers, and conveyors.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 630 mm, pomik po osi Z: 550 mm, model krmilnika: Siemens 840D solution line, največja hitrost vretena: 12.000 obr/min, DÉTAILS TECHNIQUES Course axe X : 3 000 mm Course axe Y : 630 mm Course axe Z : 550 mm Vitesse de déplacement rapide : 60 m/min Vitesse de broche : 12 000 tr/min Surface de bridage : 3 600 x 710 mm Rainures en T : 5 Nombre d’axes : 3 Magasin d’outils : 40 emplacements Course de fonctionnement en mode pendulaire par champ de travail : 1 250 mm DÉTAILS DE LA MACHINE Commande : Siemens 840D solution line Poids de la machine : 9 600 kg Isdpfx Ajyfgf Nogtsat ÉQUIPEMENT Magasin d’outils 24 positions Installation de refroidissement 900 l Système haute pression 30 bar Outils à arrosage interne Convoyeur à copeaux Groupe hydraulique 200 bar 6 raccords hydrauliques pour 200 bar 2 coupleurs de connexion A+B (3 par côté de table) Logique de serrage variable Chiron Contrôle de casse d’outil Prosin Plus à partir d’un diamètre > 3 mm Porte de chargement à ouverture et fermeture automatique Préparation machine pour 1 axe CN

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 260 h, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 530 mm, dolžina rezanja (maks.): 750 mm, skupna širina: 2.000 mm, vhodni tok: 32 A, skupna višina: 2.400 mm, delovna širina: 510 mm, skupna dolžina: 6.100 mm, vhodna napetost: 400 V, potrebna višina: 3.000 mm, zahteva za prostor dolžina: 7.500 mm, potrebna širina: 2.500 mm, Oprema: dokumentacija / priročnik, MOTIONCUTTER® 530 – 450W Digitalni Laser za Dodelavu, Popolnoma Opremljen Nameščen decembra 2024 | Samo 260 delovnih ur | Stanje kot novo Na voljo takoj v Združenem kraljestvu. Na voljo je popolnoma opremljen MOTIONCUTTER® 530, visokohitrostni digitalni laserski sistem s paketom za avtomatizacijo, pozicijskim senzorjem, ločevanjem odpadkov in izhodnim trakastim transporterjem – v bistvu popolna proizvodna konfiguracija, ki je bila ob dobavi v celoti nameščena in vključuje usposabljanje. Prvotna vrednost opreme znaša približno 317.000 €. Nameščen decembra 2024. Samo 260 skupnih delovnih ur od novega. Stroj je komaj utečen. Kaj pridobite Osnovni stroj - 450W CO₂ laserska cev (zagotovljen izhod 600W) - Delovna površina 510 x 510 mm - Hitrost gibanja žarka do 18.000 mm/s - Dinamična natančnost ±0,2 mm - Predvidena življenjska doba laserja: 20.000 ur - Mistral 530 podajalnik za zlaganje pol - 80–500 gsm - Format pol do 530 x 750 mm (razširljivo do 1000 mm) - Transportni sistem s patentiranim kovinskim mrežnim trakom - Hitrost 0–45 m/min - Integrirana čistilna postaja Ijdpfeyk Ip Tjx Agtjat Popolna dodatna oprema vključena ✅ Paket za avtomatizacijo - Prepoznavanje delov z barkodo - Avtomatizirano upravljanje delovnih nalog - XML integracija za delovne procese - 100% nadzor vsakega produkcijskega polja ✅ Pozicijski senzor - Sproten X/Y popravek glede na tiskano oznako - Ključno za precizno poravnavo embalaže ✅ Ročno ločevanje odpadka - Mehansko odstranjevanje gotovega izdelka od odpadka ✅ Izhodni shingling transporter - Visokozmogljiv izhodni sistem - Programsko nadzorovano ločevanje nalog To je konfiguracija, ki jo izberejo resni proizvajalci embalaže. Zmožnosti: - Razrez | Filigranski razrez | Kiss cut - Big | Mikro perforacija | Graviranje - Variabilna dodelava podatkov - NAMECUT® personalizacija iz CSV datotek Vse v enem prehodu. Brez orodij. Brez šablon. Idealen za: - Kratke serije embalaže iz zloženk - Kartonska embalaža - Personalizirana embalaža - Prototipi luksuzne embalaže - Dodelava visoko vrednih pol - Dodelava na digitalnih tiskarskih strojih Indigo / arkah Če trenutno izvajate izsekovanje pri zunanjih izvajalcih za kratke serije, lahko ta stroj prevzame to delo čez noč. Stanje: - Nameščen decembra 2024 - Le 260 ur skupnega obratovalnega časa - Čisto okolje proizvodnje - Popolnoma delujoč Na voljo za ogled in preizkus v Združenem kraljestvu Razlog za prodajo: strateška reorganizacija proizvodnje Prednosti nakupa: - Ni 8–10 tedenskega čakalnega roka iz tovarne - Ni zamud pri montaži - Ni stroškov mednarodnega transporta - Preizkušen, kalibriran stroj - Velik prihranek kapitala v primerjavi z novim Resni povpraševanji le. Na voljo takoj.

Stanje: rabljeno, Leto izdelave: 2007, x-travel 550 mm y-travel 400 mm z-travel 400 mm Control: INGERSOLL ANDRONIC Automation: High-speed milling machine OPS Ingersoll OPS 550 with sinker EDM machine OPS Ingersoll GANTRY 550 and automation system OPS Ingersoll MoldCenter OPS INGERSOLL OPS 550 / GANTRY 500 / IMC 5 Year of manufacture: 2007 Controls: Multiprog, Andronic, Certa OPS 550 High-Speed Milling Machine Number of axes: 5-axis Milling spindle: Tool holder: HSK E40 Spindle drive power: 17 kW Spindle speed: up to 42,000 rpm Linear axes: Travel X: 550 mm Travel Y: 400 mm Travel Z: 400 mm Work table: Dimensions: 650 x 500 mm Maximum table load: 500 kg - The milling machine requires an overhaul, the power module and cooler are missing, the machine PC is not functional (likely power supply is defective). Gantry 500 Sinker EDM Machine Travel X: 525 mm Travel Y: 400 mm Travel Z: 450 mm Work table size: 750 x 650 mm - The power module for the EDM machine is missing Handling System IMC 5 For linking a sinker EDM machine and a high-speed milling machine Ijdpfxoxiy A Us Agtoat Automatic tool changer tool magazine (40 positions) electrode magazine 126-fold Erowa ITS

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Na voljo je popolnoma obnovljen obdelovalni center Chiron iz leta 2013. Hodi X/Y: 6000 mm/630 mm, hitri pomik: 60 m/min, število orodij: 92, vpenjalni sistem orodij: HSK-A63, hitrost vrtenja: 12.000 min⁻¹, navor: 140 Nm, število rezkalnih osi: 5, teža: cca. 20.000 kg, krmiljenje: Siemens S840D, število obratovalnih ur: 77.344 h. Vključno s strgalnim trakastim transporterjem, pripravo za OKZ, vakuumskim rotacijskim filtrom Knoll VRF 250, visokotlačno črpalko (70 bar), ekstrakcijo emulzijskih hlapov (2x800 m³/h), vmesno pregrado za nihajno obdelavo, hidravličnim agregatom (210 bar) in linearnim vpenjalnim sistemom Kohn z 8 hidravličnimi vpenjalnimi čeljustmi Multi 2000MFS 125/680 HD. Dokumentacija je priložena. Ogled na lokaciji je možen. Ijdpfew Nyi Nsx Agtoat

Stanje: pripravljen za uporabo (rabljen), Na voljo je skupaj 10 naprav za deionizacijo Keyence. Generacija ionov: +/-7000V, ionsko ravnovesje: +/-30V, največje delovno območje: cca 3000mm, razpon delovne razdalje: 50mm-2000mm, material elektrod: volfram, uporaba: plastika/folije/premazi/elektronika/embalaža. Dokumentacija je na voljo. Ogled na lokaciji je možen. Iedpfxjw R U Agj Agtoat

Stanje: pripravljen za uporabo (rabljen), Pomik X/Y/Z: 650mm/400mm/425mm, dimenzije mize X/Y: 545mm/540mm, največja obremenitev mize: 500kg, število obratov: 10000obr/min, število orodij: 20, hitro pomikanje: 30m/min, podajalna hitrost: 20m/min. Dimenzije stroja X/Y/Z: pribl. 3400mm/2100mm/2800mm, teža: pribl. 5500kg. Ogled je možen na lokaciji. Iedsycwrbspfx Agteat

Leto izdelave: 1994, stanje: pripravljen za uporabo (rabljen), An intensive mixer Thyssen Henschel with an AEG motor is available. Capacity: 1000 l, double jacket volume: 95 l, max. operating temperature: 200°C, permissible operating pressure: 5 bar, rotation speed: 532 rpm, motor type: KA7318M-BB059-Z, power: 184 kW. Includes FM-type tools, bottom scraper, and fluidizing paddles. An on-site inspection is possible. Isdpfewv Umqox Agteat

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Heidenheim TNC 530, SK 40, 12.000 obr/min, 40 mest za orodje, notranje hlajenje orodja, neposredni merilni sistem na vseh oseh, centralni mazalni sistem, samodejna nakladalna vrata, merilna sonda, Ijdpfjxfqyvex Agtjat

Stanje: rabljeno, Leto izdelave: 1987, številka stroja/vozila: 87 / 906, Pressure: 63 t Stroke: 8 - 80 mm Strokes per minute: 60 - 300 spm Distance between uprights: 720 mm Table area: 710 x 700 mm Table through-hole: 345 x 100 mm Lateral upright clearance: 320 x 200 mm Ram area: 500 x 400 mm Ram adjustment: 80 mm Throat depth: 350 mm Installation height: 250 / 275 mm Isdecxxpcspfx Agtsat Feed length: 220 mm Table height above floor: 1000 mm Total power requirement: 9.2 kW Machine weight approx.: 6.5 t With SZV 3-S gripper feeder designed for strip width of 270 mm, infinitely variable speed adjustment, separate control cabinet, emergency stop safety feature, selector switch for set-up, single stroke and continuous operation, adjustable stroke

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 12.229 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 730 mm, pomik osi Y: 250 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, dolžina podajanja os X: 585 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 400 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, nazivna (navidezna) moč: 21 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC640, skupna višina: 3.000 mm, skupna dolžina: 2.370 mm, skupna širina: 2.845 mm, skupna masa: 8.000 kg, največja hitrost vretena: 42.000 obr/min, delovne ure vretena: 2.256 h, število vreten: 1, število mest v zalogovniku orodij: 90, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, MP7-5-osová Heidenhain iTNC530i s integriranim menjalnikom palet, 36 paletnih mest Pomiki X/Y/Z 730x250x400 mm Pomik osi B +/- 105 stopinj Os C neskončna Delovno območje X/Y/Z 585x250x400 mm Največja masa obdelovanca 60 kg Razdalja miza-vreteno 450 mm Mere stroja ŠxGxV 2845x2370x3000 mm Teža stroja 8000 kg Oprema: Hladilna enota Rotirna nagibna miza 160 (os B/C) Merilni sistem Renishaw OMP400 za obdelovanec Merilni sistem BLUM za orodje Sistem za preprečevanje trkov Dynaschine (DCM) Vpenjalna glava mize EROWA PowerChuck P 150 Avtomatski menjalnik palet 36x EROWA ITS50...148 Iaodpfxow U D Igj Agtst Menjalnik orodij z 90 mesti za HSK40 MHT delilnik medijev s 3 nastavitvami doziranja Krmilje Heidenhain iTNC530 HSCI FS Rezkalno vreteno Steptec HVC140 Moč vretena S2/S6 40%; 10 kW/13 kW Hitrost vretena 42.000 obr/min HSK40 Kompensacija Z-osi Alarmni sistem exo-call Oddaljena diagnostika exo-net Omrežni priključek Ročna upravljalna plošča HSCI FS Povečevalnik tlaka za vpenjalno glavo Transport, izobraževanje in zagonske storitve na zahtevo.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Suitable for separating free oils from coolant, max. throughput capacity: 500 l/h, max. fluid temperature: 70°C, pH range: 6-9, length: 620 mm, width: 510 mm, height: 1140 mm, weight: 60 kg, supplied with documentation. Iasdpfx Agsk E Nccjtjt