Visokohitrostni rezkalni stroj MP7

exeron gmbh MP7/5/P

Stanje: dober (rabljeno), Leto izdelave: 2008, Stroji za brušenje zobnikov Reishauer RZ303 Hedoxz E S Eepfx Agisnk

Stanje: rabljeno, Leto izdelave: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Hsdpfx Agsxc E H Soisnk Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feeder/automation Available from: 24.08.2024

Leto izdelave: 2012, stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Hnsdpfx Asifi D Tegijk Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 154 h, potovalna razdalja osi X: 215 mm, pomik osi Y: 100 mm, pomik po osi Z: 605 mm, skupna višina: 1.725 mm, skupna širina: 1.690 mm, skupna masa: 4.650 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: SMOOTH Ez, število osi: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 rpm with a motor power of 15.0 kW. It is equipped with a 12-position turret and rapid traverse rates of 30, 10, and 30 m/min in the X, Y, and Z axes, respectively. Contact us for further information about this machine. Additional equipment • Transformer for Europe (CE marking) • Roller guide with spherical roller bearings • SD card interface + USB storage interface • 1 set of control buttons • Foundation kit (steel plates) • CE certification (with noise filter) • C-axis positioning 0.0001° increment • 12-position turret • Y-axis control • Bar feeder interface Additional information Automatic parts catcher High-pressure coolant system Preparation for chip conveyor 8" open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic picking cycle with load detection Quick-change tool holder system Bar stock diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and workpiece end: 81 to 686 mm Hedpfx Agsx D R Svoienk Turret Number of tool stations: 12 Tool size (external turning): 25 mm Tool size (internal turning): 40 mm Tool size (driven drill): 20 mm Tool size (driven end mill): 20 mm Tool size (driven tap): M20 Indexing time per station: 0.23 s Indexing time for full rotation: 0.63 s Tailstock Quill bore (Morse taper): MT No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools: Milling spindle power (continuous): 3.7 kW Milling spindle power (40% duty cycle): 5.5 kW Maximum milling spindle speed: 4,500 rpm Minimum milling spindle speed: 20 rpm Media: Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine depth: 2785 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, skupna masa: 620 kg, število osi: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm • Counter spindle (direct drive): • Max. drive power: 29 kN (as supplied) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool equipment: • Tool magazine with 40 stations, HSK-T63 • 12-station radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High-pressure cylinder with draw tube for the main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing at main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and drawing • Remainder material detection • Unlocking of external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for programming the C-axis • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and operating materials: • 2 cooling fluid lines at 25 bar • 2 rinsing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measuring system: • Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Waste water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage monitoring BK-MICRO • 4-axis turning / balancing cut (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support area (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter Hnedpfx Asx D E Hbogiek • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed speed (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Through-spindle coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor Hnjdpfx Agew Ephbeiok - Spindle cooling - Tool measurement probe - Workpiece measurement probe: Renishaw RMP60 - Tool breakage control: SOFT AC - Number of pallets: 2 - Machine vice - Tool holder

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 265864, premer struženja: 350 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 35 obr/min, potovalna razdalja osi X: 195 mm, pomik po osi Z: 560 mm, moč vretenovega motorja: 15 W, hitrost pomika os X: 30 m/min, hitrost podajanja os Z: 33 m/min, vrtilni moment: 233 Nm, razdalja od središča mize do nosu vretena: 687 mm, Oprema: dokumentacija / priročnik, Mazatrol Smart krmilnik. Hitrost vretena: 5000 vrtljajev na minuto. Pomik X/Z: 195 mm/560 mm. Opremljen s premerom 215 mm. 3-čeljustna pogonska vpenjalna glava. 12-postajni revolver. Konjiček. Hnjdpfx Aovfm H Ajgiek Merilna sonda za orodje. Lovilec obdelovancev.

Stanje: rabljeno, Leto izdelave: 2013, Swing diameter . mm Turning length 2000 mm Control Siemens 840 D sl Main spindle: max. speed 3800 rpm Main spindle: max. torque 1200 Nm Hnsdpfx Agevu E R Ssijk Tailstock quill diameter 140 mm Center taper MK6 Tailstock force 5 - 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the vendor's plant. It is in good condition, with excellent turning accuracy. The milling drive is non-functional. A quotation from Niles for the repair of the milling drive is available upon request. Includes hydraulic steady rest.

Stanje: dober (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015 Control system: Siemens Sinumerik 840D Travel X/Y/Z = 650 x 650 x 650 mm 2-station pallet changer, pallet size: 400 x 400 mm NC rotary table 360° x 0.001° 80-position tool changer Tool holder: HSK 63 Spindle speed: 15,000 rpm Internal coolant supply (IKZ) 50 bar Chip conveyor, band filter, coolant temperature control, spindle cooling Sound and control cabinets Operating hours: 43,698 Hodpfsuav H Njx Agienk Spindle hours: 5,401

Stanje: rabljeno, Leto izdelave: 2006, Technical details: X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Hodpfxjpumdco Agienk Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours