EMCO Hyperturn 65 Powermill G2

EMCO Hyperturn 65 Powermill G2

This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information.

• Main spindle (direct drive):
• Max. torque: 250 Nm
• Counter spindle (direct drive):
• Max. drive power: 29 kN (as supplied)
• Max. torque: 250 Nm
• Speed range: 0–5,000 rpm
• Milling spindle (direct drive):
• Max. drive power: 37 kW
• Max. torque: 30 Nm
• Speed range: 0–12,000 rpm
• Tool turret (direct drive):
• Max. drive power: 10 kW
• Max. torque: 30 Nm
• Speed range: 0–12,000 rpm
• Kinematics and axes:
• Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations
• Y-axis travel: +/- 120 mm
• B-axis with direct drive: +/- 120°, hydraulic clamping
• Tool equipment:
• Tool magazine with 40 stations, HSK-T63
• 12-station radial turret with direct drive, tool interface BMT55P
• Spindles and clamping:
• High-pressure cylinder with draw tube for the main spindle
• Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle
• Programmable clamping pressure for main and counter spindle
• External feed flushing at main and counter spindle
• Mechanical holding brake on main and counter spindle
• C-axis for main and counter spindle
• Control and HMI:
• SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface
Fpjdpfex D E Hbox Adved
• 22" multi-touch display
• IPC with 240 GB
• SHOPTURN dialog programming
• 3D simulation and drawing
• Remainder material detection
• Unlocking of external memory
• CAD reader (DXF import)
• TRANSMIT and TRACYL for programming the C-axis
• USB interface, network drive (Ethernet)
• PC keyboard incl. HMI hotkey
• LED status indicator
• Fluids and operating materials:
• 2 cooling fluid lines at 25 bar
• 2 rinsing pumps at 4.3 bar
• Control cabinet air conditioning unit
• Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive
• Hydraulic unit
• Machine light
• 8 leveling elements
• Feedback/measuring system:
• Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl)

Additional equipment

• Chip management and filtration:
• Hinged belt chip conveyor, discharge height 1,200 mm
• Belt filter system, 980 liters
• Waste water pump
• Control/monitoring options:
• Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls)
• EMCO tool breakage and wear monitoring / B40D-SL
• Wireless probe / HSK drill breakage monitoring BK-MICRO
• 4-axis turning / balancing cut (SINUMERIK option)
• Alternative end spindle speed (SINUMERIK option)
• Turret as tailstock (SINUMERIK option)
• Counter spindle as tailstock (SINUMERIK option)
• Bar feeder (specs as supplied):
• Bar length: 300–1,200 mm
• Bar diameter: 10–104 mm
• Material support area (front view): 800 x 1,250 mm
• Material capacity: 12 bars with 65 mm diameter
• Max. load capacity: 400 kg (max. 74 kg/bar)
• Rectangular material: min.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.