Kompletna žaga (stacionarna)

MADREW AE-400

The AE-400 SERVO Edging Machine is designed for longitudinal edging and cutting of side boards fed into the machine at high speeds (100-400 m/min). The machine works directly with infeed and outfeed conveyors, allowing for fully automatic operation.

The machine is equipped with top and bottom board scanners.

The maximum instantaneous output of the edger—up to 50 boards/min—can be achieved when cutting 2.5 m boards to the same width without changing the saw blade spacing. Any adjustment of the edging unit to the board width affects the capacity. Depending on the working configuration, average throughput ranges from 35 to 48 boards per minute.

Technical Data

Fpsdpfx Ahsnygvremoh
No. Parameter Value
1. Spindle drive motor power 55 kW
2. Saw spindle speed 3550 rpm
3. Saw blade diameter 400 mm
4. Maximum cutting height 50 mm
5. Number of saw blades used 2 to 3 pcs. (2 floating saws)
6. Minimum board length 2000 mm
7. Maximum incoming material length 6200 mm
8. Maximum number of boards after splitting one board: 2 pcs.
9. Feed speed 100–400 m/min

Single board cutting – with two saws (2 floating saws):
1. Minimum saw spacing (board width after splitting) 75 mm
2. Maximum outer saw spacing (board width after splitting) 300 mm

Double board cutting – with three saws (2 floating saws):
1. Fixed coupling saw spacing (board width after splitting) 50–100 mm
2. Distance between floating saws (board width after splitting) 50–100 mm
3. Double board cutting minimum 2 x 50 mm
4. Double board cutting maximum 2 x 100 mm

Other machine configurations available on request. Made to order.

We also manufacture other sawmill lines: log sorting lines, board sorting lines, automatic board stackers, and conveyors.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.