Roller track / stop sistemi

WMT 3000/360/Anschlag

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) Dwodpjylmmmefx Aflsa • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Dwjdpfexcuicsx Aflsa Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments • With swivel device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality • For the use of ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 2.500 kg, dvižna višina: 17.000 mm, Leto izdelave: 2022, obratovalne ure: 1.522 h, This is a unit in very good condition – operated by our own operators. When purchasing from the exclusive distributor, you are assured of the quality of the machine, spare parts availability, and after-sales service. A presentation or rental can be arranged. Key equipment information: The M250 model is currently the most popular crane in Poland for installing aluminum joinery above 10 meters. Compared to competitors, it stands out primarily for: - YAN-MAR diesel engine, more powerful than the popular Maeda mini crane - Fully hydraulically extendable jib, ready for immediate operation - Remote control included as standard (brand: Scanreco, used in the world’s best machines) - Horizontally extendable tracks (in competing models, the tracks extend at a 45-degree angle, which increases the crane’s height when fully extended) - The most powerful searcher hook for the main boom available on the market (2000 kg) - Winch rope assembly mounted to the mast as needed. If the rope block is not required (working with a searcher hook), the end of the rope is secured to the side of the main boom - Very compact design (all ropes and sensors routed inside the mast) The offer concerns the mini crane BG Lift M250 with the following equipment: • 900 kg winch (65m) • Electric motor (single-phase – 220V) • Hydraulic jib • Searcher hook (for the jib) • Pulley set (single rope reeving) • Pulley set (triple rope reeving) • White tracks Operating hours on diesel engine: 11,522 Operating hours on electric motor: 321 M250/2 Dedpewnd Nlefx Aflswa

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Rabljeni CNC preklopnik Ras 62.25 Model: 62.25 Proizvajalec: Ras Leto izdelave: 2012 CNC preklopnik RAS 62.25 Kapaciteta: 2540 mm x 2,5 mm CNC avtomatski stroj za krivljenje (leto 2012) Opremljen s kontrolno enoto System 6000 na dotik (zaslon nedavno zamenjan) 3,2-metrski merilnik zadnjega roba v obliki črke J Dvojno nožno stikalo za upravljanje Dwjdpfxon Tnzfs Aflja Svetlobne zavese MACHINE GUARD SOLUTIONS Priložena segmentirana in ravna orodja

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Postelja za varjenje visoke trdnosti Razdeljen sistem za odvod dima Popolnoma avtomatski sistem za vbrizgavanje maziva Popolnoma avtomatsko rezanje, varčevanje z materialom, velika hitrost Območje rezanja: 4000 × 2000 mm Pomik po osi X: 1520 mm Dwjdpjw A Iilofx Aflja Pomik po osi Y: 4020 mm Pomik po osi Z: 80 mm Maks. kombinirana pozicijska hitrost: 170 m/min Pospešek: 2,8 G Dimenzije stroja (D × Š × V): 9500 × 2900 × 2380 mm Tloris: 10500 × 3400 mm Neto teža: 8500 kg

Stanje: novo, Leto izdelave: 2025, Ročna upogibna stiskalnica MB-3150 Dwsdpfsv T Uvzjx Aflea Glavna prednost naše ročne upogibne stiskalnice v primerjavi z drugimi proizvajalci je odstranljiva zgornja letva. Ta omogoča zamenjavo ozke zgornje letve z letvijo druge konfiguracije (segmentirana letva ali letva za izdelavo valovitih plošč). Tako prihranite stroške za nakup dodatnih strojev in optimalno izkoristite delovni prostor. Naša ročna upogibna stiskalnica ima robustno in togo konstrukcijo, ki omogoča upogibanje pločevine brez nezaželenih deformacij. Ročno upogibno stiskalnico MB-3150 mm lahko kupite v standardni izvedbi (ročna upogibna stiskalnica, krožne škarje, zadnja odlagalna miza, alidada, kotno omejilo, stranski ročaji). Na voljo je tudi dodatna oprema za upogibno stiskalnico MB-3150 mm: nožni pedal, segmentirana letva, letva za izdelavo valovite pločevine, absorber ter prednji omejilci). Proizvajamo štiri tipe ročnih upogibnih stiskalnic MB: - Ročna upogibna stiskalnica 1400x1,2 mm - Ročna upogibna stiskalnica 2150x1 mm - Ročna upogibna stiskalnica 2650x0,8 mm - Ročna upogibna stiskalnica 3150x0,7 mm Ta ročna upogibna stiskalnica upogiba kovinske pločevine do maksimalne debeline 0,7 mm. Naše podjetje proizvaja to vrsto ročnih upogibnih stiskalnic od leta 2003, zato vam z dolgoletnimi izkušnjami lahko ponudimo pravo rešitev za vaše podjetje. Za podrobnosti o ceni in možnosti dostave nas kontaktirajte. Z veseljem vam bomo zagotovili vse potrebne informacije. Tehnične specifikacije: - Največja delovna širina materiala (mm): 3150 - Največja debelina materiala (mm): 0,7

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Please contact me for further information. Dedpjk Nn Ilefx Aflowa

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine, Manufacturer: Zopf, Model: ZB 70/2 M - Two driven rollers - Dual adjustment of the upper roller - Operation possible in both horizontal and vertical positions - Shafts supported by tapered roller bearings - Use of interchangeable slide rails on the guide carriage - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Bending capacity: up to 60x10 mm (vertical orientation) - Round tube up to 80x2 mm - Angle iron up to 50x50x5 mm Dwsdpfx Aet Hwfnjflea - Solid material up to 35 mm - Weight: 400 kg

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Volumetric flow rate: 13,600 m³/h, pressure increase: 3,100 Pa, rotational speed: 1,500 rpm, motor power: 18.5 kW, weight: 790 kg, with STBB HAB S chip container, including complete documentation. Dedpfx Afoi A Ix Hjljwa

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Material: stainless steel tube Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: Dsdpfx Asfv Atlsflewa This offer is for the stop system only, without roller conveyor!