Carl Zeiss Imt Gmbh Prismo Mp5 Htg nakup rabljenega (69.582)

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16501575, volumenski pretok: 4.800 m³/h, vhodna napetost: 380 V, moč: 2,5 kW (3,40 KM), Oprema: Na voljo je tipska ploščica, The dirt particles, emulsion and oil mist, as well as smoke generated are captured directly at the source and guided through the individual filter stages. The separated liquid collects at the bottom of the device and can be returned to the machining center via the siphon. In the first filter stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filter stage captures the majority of the fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the level of contamination. The third filter stage consists of a large-area particulate air filter of class H13. A consistent high efficiency of 99.95% for particle sizes from 0.3μ DOP is ensured here. Type testing according to DIN EN 1822-1 H13 permits the recirculation of the filtered air back into the workspace. Isdpfxjyz Sn Ns Aa Ueia

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, gradbena višina: 2.200 mm, število vreten: 3, zahteva za prostor dolžina: 5.000 mm, potrebna širina: 5.500 mm, številka stroja/vozila: 50844458, stopnja avtomatizacije: samodejen, proizvodna zmogljivost: 3.000 enota/h, We are offering this used PIA Automation production line for surgical disposable masks, year of manufacture 2020. The line was operated for only 2.5 years in single-shift operation and its condition can be described as "very good." In addition, the production line includes an integrated compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Supply line circuit protection: 25 A Short-circuit rating: < 10 kA Iedpfxoy Ddnmj Aa Ujia Concept: The line consists of a total of three modules, connected via conveyor belts. In the first segment, the individual consumables are fed by rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished masks are then transported to the next modules via a step conveyor and transport belts. These modules are arranged in parallel, where the ear loops are automatically fed and welded to the masks. If you have any questions or need further information, feel free to send us a message or give us a call.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 512 mm, skupna višina: 1.952 mm, skupna dolžina: 772 mm, Direct from the manufacturer, the original from Apfel GmbH. Fully assembled, including: - 2 shelves KRB 4700 - 1 storage bin KEN 6422 (No. 62) - 2 storage bins KEN 4322 (No. 42) - 1 waste bin made of galvanized sheet metal - 2 brooms - 1 hand brush - 1 dustpan - 1 set of shadow boards - 1 compartment for cleaning agents - 4 swivel castors with locking brakes Load capacity: 400 kg Iijdpfx Aajuvigpe Uja Dimensions: 512 W x 1,952 H x 772 D (mm) Frame powder-coated in black-grey RAL 7021 (body) Various versions and custom solutions available—we as the manufacturer are happy to support you with your requirements! (See pictures 3+4)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK02UXKP0579, merilno območje os X: 550 mm, merilno območje osi Y: 600 mm, skupna masa: 1 kg, natančnost ponavljanja: 0,02 mm, Oprema: dokumentacija / priročnik, ZEISS T-SCAN hawk merilni laserski 3D skener z natančnostjo 0,02 mm + 0,035 mm/m ter tremi načini skeniranja (Standardni – 7 rdečih križev, Fini – 5 modrih linij, Posamezna rdeča linija za globoke luknje). Letnik proizvodnje 2022. Popolnoma funkcionalno in pripravljeno za uporabo. Vključeno: - 3D skener - Kalibracijska plošča - Zmogljiva prenosna delovna postaja Dell, še vedno v garanciji Dell Pro Support - Programska oprema GOM/ZEISS Inspect 2021 z licenco na USB ključku - Trden transportni kovček - Torba za prenosnik - Vsa originalna dokumentacija Možen ogled ter preizkus v delovnem okolju. ZEISS INSPECT 2021 omogoča: • Odpiranje in urejanje novih ter obstoječih projektov • Uvoz oblačnih točk in poligonskih mrež • Kreiranje, obdelava in prilagajanje poligonskih mrež Iiodjyxy Sdepfx Aa Uoa • Konstrukcija elementov: osnovna geometrija, točke, prerezi, krivulje, površine, dimenzije • Uvoz CAD podatkov v standardnih formatih: IGES, VDA, STEP, JT Open, STL, PLY • Uporaba običajnih metod poravnave • Primerjava CAD modela z barvnim prikazom odstopanj • Dimenzioniranje ter ocenjevanje oblike in lege glede na ISO GPS in ASME Y14.5 • Poročilni modul Dostava možna.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 201502530269, merilno območje os X: 700 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 600 mm, obremenitev mize: 560 kg, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of manufacture: 2015 | Commissioned: 2016 | Perfect condition | Very low operating hours For sale: ZEISS Contura G2 coordinate measuring machine with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT T1 scanning head. The device comes from a controlled laboratory environment, used exclusively on-demand on a single shift, and never integrated into a production line – resulting in exceptionally low actual running hours and excellent technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring range (X/Y/Z): 700 / 700 / 600 mm Year of manufacture: 2015 Commissioning: 2016 Technical and visual condition: perfect Measurement error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration & Equipment ✅ ZEISS VAST XXT TL1 active scanning head ✅ Probe rack/magazine ✅ Set of measurement styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Calibration sphere ✅ BP26_SE control panel 🔹 Usage History Device operated exclusively in laboratory mode Occasional, project-based use (on-demand) Single shift, no serial or production operations As a result, the machine exhibits extremely low mechanical wear 🔹 Service & Calibration ✅ Service and calibration performed exclusively by official ZEISS service ✅ Regular maintenance according to manufacturer’s guidelines ✅ No third-party interventions ✅ Fully functional device 🔹 Status 📍 Device available immediately Iodpfeyzmbdsx Aa Uoia 🔍 Demonstration possible 📄 Complete documentation ✅ Transport to be arranged by the purchaser

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, trajanje garancije: 12 meseci, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display Iiodpfx Aoyycqxoa Usa • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Ponujamo nov stroj LOWA GmbH Abfüll- und Verschließsysteme WK12-17 za polnjenje in zapiranje steklenic, letnik 2025. Proizvajalec: LOWA GmbH Abfüll- und Verschließsysteme Model: Zapiralni stroj WK12-17 Tip stroja: Stroj za polnjenje in zapiranje steklenic Letnik izdelave: 2025 Stanje: novo Iodoyybh Aspfx Aa Uoia ID kategorije: 679 Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Leto izdelave: 2016, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V primeru vprašanj me lahko kadar koli kontaktirate po e-pošti. Isdsya H Uyepfx Aa Ueia Lokacija stroja je v Laupheimu.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm Iodpfx Aaoyx Hrko Ujia • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head Iodpfx Ajyx Hgbea Usia • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A Isdjwf Rg Sepfx Aa Usia --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: integrated

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23 Iisdpfx Aewf Rgroa Usa

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Ijdpfxowf Rg Es Aa Ueia Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Iodpfowf Rgxsx Aa Usia Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 21_0346, NEW – UNUSED High-performance positioner for manual or robotic welding – lifting and rotating device. Special equipment for specific applications, designed and manufactured by FÖRSTER Welding Systems GmbH. Iiodpfx Aaeurlcrj Uea Maximum workpiece diameter: 2500 mm Maximum workpiece weight: 20 tons Dimensions of the welding positioner: 7000 x 3000 x 3750 mm Weight (without counterweight): 20,000 kg Overall dimensions of the entire system: 8900 x 4800 x 3750 mm Total weight of the entire system: 40,000 kg Counterweight included in the scope of delivery. Complete documentation available. Technical support from the manufacturer is available upon request. The machine is located in central Poland.

Stanje: rabljeno, Trivaljni valjar za testo Isdpsy Akd Esfx Aa Ueia

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 21 A, vrsta vhodnega toka: Enosmerni tok, volumenski pretok: 6.045 m³/h, skupna masa: 1.100 kg, ODSESOVALNIK ALKO ECO JET 60/5 HD Odvod žagovine, odvod prahu, samočistilni filter, podtlak ALKO ECO JET Filter se pnevmatsko čisti z impulzi stisnjenega zraka med delovanjem, kar zagotavlja visoko učinkovitost naprave. Idealen za vse vrste suhega prahu pri različnih tehnoloških postopkih. Iodeyrqnzjpfx Aa Usia Možna je menjava filtrirnih vreč glede na zahteve in namen uporabe.

Leto izdelave: 2013, stanje: rabljeno, Proizvajalec: PAUL VON DER BANK GMBH, Tip: Robotska varilna naprava, Leto izdelave: 2013, Serijska št.: 13.536, Varilni vir, proizvajalec Fronius, tip CM TransPuls Synergic 4000, Hladilna naprava, Varilna enota VR7000CMT, Programirni terminal RCU5000I, Obratna miza, Varilni robot, proizvajalec KUKA, tip KR5-2ARC, Robotska krmilna enota KRC4, Odsesovalna naprava, proizvajalec Plymovent – naprava ni priključena Isdpfx Aaoyx Exvj Ueia

Leto izdelave: 1999, stanje: dober (rabljeno), Funkcionalnost: omejena funkcionalnost, !!! Important!!! The systems have now been dismantled. The system components can be inspected on site. For sale here are 2 fully functional SLC (Surface Like Chrome) vacuum coating systems / metallization units manufactured by PVT GmbH. A 3rd non-functional system is no longer available for sale. Complete documentation for the systems is available in paper form and will be handed over upon purchase. In order to operate the systems, a compressed air supply, power supply, and water cooling system are required and must be provided by the buyer. All other PVT processes are, of course, possible as well. The system was primarily used for processing wheel rims. Treatment of other workpieces made of aluminum, steel, or plastic is also possible, such as bathroom/kitchen fittings, motorcycle and automotive add-on parts, door and window handles, etc. What are the advantages of the SLC process compared to conventional chrome plating: - SLC coating is a high-gloss finish optically comparable to electroplated chrome - Significantly more resistant to scratches and chipping - The process is more environmentally friendly and provides outstanding corrosion resistance - Costs are considerably lower Technical data: Chamber internal dimensions approx. 1600 mm diameter, approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Iiedsyzdm Repfx Aa Uoa Year of manufacture: 1998/1999 Documentation: available Control: Allen Bradley PLC (automatic coating process including hardware)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, dolžina zabojnika: 20 čevelj, barva: bela, širina tovornega prostora: 2.400 mm, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 2.600 mm, Oprema: klimatska naprava, parkirni grelec, Office container 20 ft for sale 14.4 m² NEW | Office container 6×2.4 m insulated | Site container Buy office container directly from the manufacturer – insulated 20 ft office container (14.4 m²), ready for immediate use. Ideal for construction sites, project offices, industry, and mobile office solutions. Buy 20 ft office container – insulated office container 14.4 m² for flexible applications "Manufacturer of modular containers – customised solutions according to your requirements, including bespoke dimensions and high-quality interior fittings." The 20 ft (6×2.4 m) office container from MODULE-T Germany GmbH is the ideal solution if you are looking to buy a robust, ready-to-use office container. With a floor area of 14.4 m², this office container is perfect as a site office, project container, sales office or mobile workspace. Thanks to its sturdy steel frame construction, high-quality PU insulation and modular design, this insulated office container is suitable for year-round use and offers a durable, cost-efficient space solution. 👉 Buy your office container now – brand new, flexible & directly from the manufacturer 🟩 Areas of application - Site office / site management container - Mobile office container for industry & commerce - Project office & administration container - Sales office / reception container - Mobile office solutions - Staff break containers 🟩 Your benefits ✔️ Office container 20 ft – 14.4 m² usable area ✔️ Immediately ready-to-use – plug & play system ✔️ Insulated office container – suitable for year-round operation ✔️ Including 2000 W electric heating ✔️ Robust steel construction – durable & stable ✔️ Modularly extendable to container complexes ✔️ 100% new – no rental or used containers ✔️ Direct from the manufacturer – excellent value for money 🟩 Technical data - Model: OC-A6000.1 - Dimensions: 6,000 × 2,400 mm (20 ft) - Area: 14.4 m² - Internal height: 2,400 mm - External height: 2,600 mm 🟩 Construction & materials Frame: - Welded, painted steel frame Walls: - 50 mm PU sandwich panels - Optional: reinforced insulation / mineral wool 🟩 Doors & windows - Insulated steel door (880 × 1960 mm) - 2 × PVC windows (double-glazed) ✔️ Bright and pleasant working environment 🟩 Floor structure - 16 mm cement fibre board - 3 mm PVC floor covering ✔️ Low-maintenance ✔️ Durable ✔️ Fire protection class A1 🟩 Heating & comfort - Electric heater 2000 W (included) ✔️ Ideal for year-round use 🟩 Electrical equipment - LED interior lighting Iiodpfx Aasy A Scie Uja - Exterior lighting - Sockets & light switches - Integrated circuit breaker box 👉 Delivered ready for connection 🟩 Optional equipment - Air conditioning (heating & cooling) - Roller shutters / security grilles - Reinforced insulation up to 100 mm - Individual RAL colour design 🟩 Delivery & installation 🚚 Delivery Germany & Europe: approx. 45–50 days 📦 Delivered assembled or flat-pack ⚡ Ready for use shortly after installation 🟩 Why MODULE-T Germany? - Over 15 years of experience in container construction - Specialist for office containers & modular buildings - Europe-wide delivery & projects - Direct from manufacturer – no intermediaries 🟩 Call-to-action 👉 Buy your office container now or request a quotation 👉 Get personalised advice directly from the manufacturer

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, dolžina zabojnika: 40 čevelj, širina tovornega prostora: 2.400 mm, dolžina tovornega prostora: 26.000 mm, višina nakladalnega prostora: 2.600 mm, Buy office container system 40 ft NEW | 2 office containers 28.8 m² | double modular office container Purchase an office container system directly from the manufacturer – modular double office containers (40 ft / 28.8 m²) with 2 separate office rooms. Ideal for construction sites, project offices, and companies. Office container system for sale – 2 separated office areas over 28.8 m² "Manufacturer of modular containers – tailor-made solutions to your specifications, including custom dimensions and high-quality interior fittings." The modular office container system (2× 20 ft units) from MODULE-T Germany GmbH is the perfect solution when you need a flexible, ready-to-use office container unit. With a total area of 28.8 m², this double office container offers two completely separate office spaces – ideal for teams, concurrent workflows, and organised work areas. Thanks to the robust steel frame, premium PU insulation, and modular design, this office container system is perfectly insulated and suitable for year-round use. 👉 Buy your office container system now – modular, insulated & direct from the manufacturer 🟩 Areas of Application - Construction site office / site manager container - Project office & planning container - Engineering & administration office - Office container systems for industry & business - Temporary office buildings - Container offices for companies 🟩 Your Advantages at a Glance ✔️ 40 ft office container system (2×20 ft) ✔️ 2 separate office rooms – optimum layout ✔️ 28.8 m² office space – ideal for teams ✔️ Insulated containers – suitable for all seasons ✔️ Ready to use immediately ✔️ Strong steel frame construction ✔️ Modular and expandable to larger complexes ✔️ 100% new – no rentals or used containers 🟩 Technical Data - Overall dimensions: 12,000 × 2,400 mm (40 ft) - Area: 28.8 m² - Internal height: 2,400 mm - External height: 2,600 mm Construction: - Welded, painted steel frame "RAL 9002" Walls: - 50 mm PU sandwich panels - Optional: reinforced insulation up to 100 mm / mineral wool - Connection and sealing kit included 🟩 Equipment - 2 × insulated steel doors - 4 × PVC windows (double glazing) 4 + 16 + 4mm - Non-slip 3 mm PVC floor 🟩 Electrical Equipment - Interior lighting - Exterior lighting - Sockets & light switches - Integrated fuse box "CE" 👉 Delivered ready for connection 🟩 Optional Equipment - Air conditioning (heating & cooling) - Electric heating - Roller shutters / security bars - Custom RAL paint finish - Furniture packages (office equipment) - Expandable into container complexes & modular buildings 🟩 Delivery & Installation Iiedpfx Asy Daxbea Uja 🚚 Delivery Germany & Europe: approx. 30 days 📦 Delivered assembled or flat-pack ⚡ Fast installation – ready to use immediately 🟩 Why MODULE-T Germany? - Over 15 years of experience in container construction - Specialist for office containers & container systems - Pan-European delivery & projects - Direct from the manufacturer – no intermediaries 🟩 Call-to-Action 👉 Buy your office container system now or request a quote 👉 Secure personalised advice direct from the manufacturer

Leto izdelave: 2020, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Sušilnik je namenjen predvsem sušenju blata iz čistilnih naprav ali substrata iz bioplinskih naprav. Material, ki se vnese v sušilnik, vrtinčijo metalne gredi v sušilni komori. Dimni plini iz motorja z notranjim izgorevanjem obdajajo material in povzročajo izhlapevanje vode. Dnevni pretok ca. 10 t. Sušilnik se prodaja z vsemi pomožnimi napravami, kot so polžna dvigala, krmilna omara, dodatni gorilnik, črpalka za kislino, lopute za dimne pline ipd. Podrobnosti z veseljem osebno. Možen demontaža in dostava. Proizvajalec je na voljo za ponovno zagon. Isdpfeyx Iztjx Aa Usia

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) Iiodpfoyxccrex Aa Usa • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy, and small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a hand scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 watt, 50 watt) • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) Iodpfx Aaju Smcbj Ujia • Signal light for operating status (on handheld unit) • Marking software: EZCAD • Power connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, položaj glave za glodanje: mittig, največja hitrost vretena: 60.000 obr/min, skupna višina: 1.550 mm, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 560 kg, delovno območje: 420 mm, trajanje garancije: 12 meseci, vrsta pogona: Linearmotor, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Semi-automatic depaneling / Base machine with parallel shuttle Isdpfsxt Dk Rjx Aa Uoia The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the growing demands of the production process. PCB panels made of various materials are separated with maximum product flexibility, precision, and throughput using dust- and stress-minimizing sawing and milling techniques. Highly dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling machine superior durability and reliability. Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 allows for fast product changeovers while maintaining short separation and handling times. Panel loading is carried out via a parallel shuttle, with pick-up and fixation via pin clamping technology, and, if required, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module designed as a parallel shuttle, separate left and right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area of 420 x 330 mm per side • Automatic cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage control for slot cutters only • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant An optional dust extraction unit can be offered retrofitted if needed.