Ott Strong Edge nakup rabljenega (5.806)

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Ta industrijska proizvodna linija podjetja HOMAG WEEKE je bila izdelana leta 2007. Opremljena je z vsemi potrebnimi napravami za obdelavo in kantiranje plošč v velikih količinah, vključno z avtomatskimi sistemi za dovajanje materiala, centralnim transportnim sistemom, več moduli za kantiranje in portanim manipulatorjem za skladiščenje. Idealna za učinkovito proizvodnjo lesa, ki zagotavlja natančno in priročno obdelavo. Izkoristite priložnost in kupite to industrijsko proizvodno linijo podjetja HOMAG WEEKE. Za dodatne informacije o tem stroju nas kontaktirajte. • Stroji za obdelavo jedra: • HOMAG Optimat KFL 525 • Agregati: predobdelava, lepljenje, obrezovanje, agregati za obdelavo robov, rezila, poliranje • Krmilnik HOMAG z zaslonom na dotik/tipkovnico • Senzorji za zaznavanje debeline plošče in materiala robov • Velika modra varnostna okna • HOMAG Optimat KFL 526 • Neprekinjene postaje za obrezovanje in poliranje • Ročni dostop za servisiranje z odpirajočimi se pokrovi • Krmiljenje in elektrika: • Nadzorna omara HOMAG z glavnim stikalom • PLC, varovalke, stikala, merilniki napetosti/tok. • Varnostni nadzorni elementi (ustavitev, ponastavitev, napredovanje, izredna ustavitev) • Stanje: • Popolnoma funkcionalna in priključena naprava • Normalna obraba zaradi uporabe; ni zaznanih večjih poškodb • Nameščen celoten sklop profesionalnih agregatov za kantiranje Dodatna oprema • 2× Avtomatski sistemi za nakladanje: WEEKE OPTIMAT BST 500 D (2007) • Serijske številke: kW, 80 A) in kW, 63 A) • Nadzemna premostitev z vakuumske sesalne podloge, samodejna usmeritev materiala • Težko obremenjen transportni sistem Fgedpszuhbisfx Antsg • Transportni/prenosni sistem: HOMAG OPTIMAT TDL 310/25/12 (2007) • Serijska številka: • Širok transportni sistem z varnostnimi pokrovi • Proge za prečno premikanje in razvrščanje • Integrirane merilne in pozicijske enote • Portani manipulator (vlačilec/razkladač) • Nadzemna vakuumska enota za nanašanje (oranžna) • Linearno vodilo z verižnim pogonom, lasten motor • Samodejno dvigovanje in skladiščenje končanih plošč • Sesanje/filtriranje • Močan industrijski sistem za sesanje prahu po celotni liniji (rumene fleksibilne cevi + kovinske kanale) • Varnostne naprave • Popoln sklop varnostnih naprav po celotni liniji

Stanje: rabljeno, OTT MEGAtronic 11 Lack Širokopasovni umerjevalno-fini brusilni avtomat 1. Brusilna enota s umerjevalnim valjem DM 150 mm, 90° Shore 2. Brusilna enota z elektronsko krmiljenim, segmentiranim membranskim brusnim čevljem Delovna širina 1.100 mm MEGA paket za brušenje laka Nastavljiva hitrost podajalnega traku 3-15 m/min Moč motorja 1. brusilne enote 11 kW Moč motorja 2. brusilne enote 11 kW z drugo hitrostjo traku 4,5 m/s Dodatna posebna oprema: Fjdpfezi A R Ijx Antogg VAKUUMSKA MIZA VAKUUMSKA NAPRAVA 3 kW Odpih traku Togi brusilni čevelj za masivno in okvirno brušenje Stroj je delavniško obnovljen in v vrhunskem stanju iz obrtnih delavnic Na zalogi v Liebochu

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 8.000 h, številka stroja/vozila: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for highly efficient wraparound labeling on PET bottles. Built in 2008 and designed for modern beverage production, it can be seamlessly integrated into a used bottling line or operated as a standalone station in industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is ideally suited for medium-speed operations in the water, juice, and other beverage segments that use OPP film labels. SACMI technology is renowned for durability, precision, and reliability, making this secondhand labeling solution an excellent choice for manufacturers seeking dependable filling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, offering flexibility for various SKUs and seasonal product runs. OPP film labels applied as roll-fed wraparound help to reduce labeling costs and improve presentation quality with clean seams and consistent labeling. This configuration is a practical choice for beverage production facilities looking to increase or expand capacity while maintaining a compact footprint and efficient integration into existing conveyor and handling systems. Technical Specifications & Performance Data Fedpfx Ajxvpd Ujntjgg Manufacturer: SACMI Year: 2008 Label type: OPP film (roll-fed) Production speed: 12,000 bph (nominal) Bottle formats: 1.5L, 0.6L, 0.33L Container material: PET Advanced Automation and Control Systems The OPP roll-fed concept utilizes hotmelt application at the leading and trailing edges of the label for secure wraparound results. The design supports stable bottle handling, precise label guidance, and uniform cutting for premium presentation quality. The control system is straightforward for operators, with clear access to essential settings and process parameters to support rapid changeovers and format adjustments. Production Line Integration Capabilities This labeling machine readily integrates into complete filling lines and industrial packaging systems. It can be operated in line with upstream filling and downstream inspection, packing, or shrink-wrapping equipment. Changeover processes accommodate common PET bottle sizes like 0.33 L, 0.6 L, and 1.5 liters, enabling flexibility for multiple products across beverage portfolios within a single production line. Machine Condition and Maintenance History The unit has logged around 10,000 operating hours. It is currently dismantled from the production line but can be powered on to demonstrate bottle transport. The machine can start and run, with label gluing deactivated for demonstration purposes. Technical documentation is available to support commissioning, operation, and maintenance. Overall, the machine presents as a well-maintained used asset that ...

Stanje: rabljeno, Širina: 1300 mm Fjdpjzy Hu Sefx Antjgg 1 valj, 1 profilni valj, 1 krtača

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, številka stroja/vozila: 08450, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 15.861 h, Stroj za nanášanje robnih trakov + sistem za povratno vodenje BARBARIC LX U4 B2200! Stroj je opremljen s sledečimi napravami: Naprava za obrezovanje robov Naprava za nanašanje lepila VTG Sistem za hitro namestitev lepila (Quick-Lock) Predgrevalni rezervoar z avtomatskim doziranjem granul Naprava za obrezovanje koncev Naprava za obrezovanje/profiliranje robov Naprava za obrezovanje kontur KFA-x30 Rezalniki za profiliranje in obrezovanje robov TEHNIČNE PODROBNOSTI Debelina obdelovanca: 8–60 mm Hitrost podajanja: približno 6–30 m/min PODROBNOSTI O STROJU Fgsdpfx Aozxgfzsnteg Napetostni sistem: 3 N PE Delovna napetost: 400 V Frekvenca omrežja: 50 Hz Nazivna moč: 32 kW Nazivni tok: 69 A Delovne ure stroja za nanášanje robnih trakov: približno 15.861 ur (stanje: 2023) Sistem za povratno vodenje BARBARIC LX U4 B2200 Leto izdelave: 2014 Serijska številka: 2130742-102 Delovne ure: približno 8.997 ur (stanje: 2023) OPREMA Avtomatski, 12-pozicijski magazin za robne trakove Predgrevalni rezervoar z avtomatskim doziranjem granul

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. Fgedpfef Tdwcex Antsg • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Naprodaj: Premium Holz-Her 1329 Multi robni lepilni stroj + Return-Master 5920 Prodajamo vrhunski robni lepilni stroj Holz-Her 1329 Multi, vključno z vračalnim sistemom Return-Master 5920. Enota je stara 4 leta in je v odličnem stanju. Prvotna cena novega: 138.000 € + DDV Fgsdpfx Aeygrghentog Naša cena: 64.000€ + DDV (prihranek 50 %) Zakaj izbrati ta stroj? Pridobite vrhunsko, malo rabljeno napravo po isti ceni kot je subvencionirana enota, vendar brez papirologije, birokracije ali dolgoročnih obveznosti iz razpisov. Vzdrževanje: Redno servisirano s strani strokovne tehnične ekipe Dimpex. Zmogljivost: Visokospecifikacijska različica »Multi« za raznovrstne proizvodne potrebe. Prosimo, samo resni kupci.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. Fsdpfx Aol Rix Nentsgg • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! Fjdpfx Asych Igjntogg • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Fodovvkipepfx Antogg Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. - Fully encapsulated housing for a clean operating environment.

Stanje: zelo dobro (rabljeno), Kataloška številka: 7808 TEHNIČNI PODATKI maksimalna širina obdelovanega elementa 1100 mm maksimalna višina obdelovanega elementa 160 mm 2 agregata: 1) valj iz gumene zmes z utori za kalibriranje 2) valj iz gumene zmes + notranji valj + kovinski valj – od zgoraj 2 kovinska valja, drsni agregati čistilna krtača – od spodaj pogonski trak oscilacija traku s pnevmatičnim sistemom na foto senzorjih električno dvigovanje mize 2 vrsti hitrosti podajanja 1,1 kW motor 15 kW z zračno zavoro dodatni pnevmatični notranji valj delovni tlak 6-8 bar premer priključka za odsesavanje 2x160 mm, 1x120 mm skupne dimenzije d/š/v 2700x2100x2200 mm teža približno 3000 kg – nemška proizvodnja – 2 agregata Fgjdpfx Aneztambstsg – dodatni pnevmatični notranji valj – neobarvana – rabljena brusilka, zelo dobro stanje Neto cena: 32900 PLN Neto cena: 7833 EUR, odvisno od menjalnega tečaja 4,2 EUR (Cene se lahko spreminjajo glede na večje nihanje menjalnega tečaja)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Fodpfxjxgpaqo Antjgg Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 60 h, moč: 0,5 kW (0,68 KM), vhodna napetost: 400 V, Oprema: CE označba, dokumentacija / priročnik, Vitap Eclipse polavtomatski robni lepilni stroj za obdelavo kontur 2014, največ 60 delovnih ur Fgjdpfey Rmyfox Antjg

Stanje: pripravljen za uporabo (rabljen), Manufacturer: OTT Model: TKS Fgjdehir A Hjpfx Antjg Working height: 800 mm Dimensions: W 1,060 x L 720 x H 930 mm Weight approx.: 120 kg Condition: used

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with pre-milling unit, hotmelt adhesive application for straight workpieces (EVA-PUR gluepot with drainage function optional), HF end-trimming station, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequencing and integrated track control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and heavy wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed rate: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touch screen. • Automatic edge feeder for roll material via rotary roll table, D=800 mm. • Two contra-rotating, sensor-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge application. • Long infeed fence (650 mm) with support. • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leakproof with glue supply from below (excess glue is automatically returned to the gluepot), precision glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with drainage/cleaning function for rapid color change. • Automatic strip magazine (70 mm intake capacity) with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressing rollers ensures optimal joint formation between the edge material and the workpiece, with digital counter for pressure zone adjustment. • High-frequency end-trimming saw equipped with HF motor, 0.35 kW, 12,000 rpm, two saw blades and high-precision linear guides for clean and precise cutting, equipped with dust extraction hood. • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters, suitable for radius, flush, and bevel milling, horizontal and vertical workpiece tracing, aggregate adjustment with digital counters for different edge types, two chip extraction hoods with 2 x Ø 100 mm central extractors, height adjustment of the upper unit linked to the top pressure roller. Fsdpfxed R U Age Antjgg • Corner copying unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, selectable via control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idle time, on/off functions for processing units and error diagnostics, including digital meter counter for edge material usage. • LED lighting in the enclosure • Riepe spray systems for anti-adhesion, NFLY, and cleaning agent optionally available Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping cut removes any milling marks left by radius cutters, providing a perfect finish.

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 02/96088A, skupna dolžina: 7.500 mm, skupna širina: 2.000 mm, skupna višina: 2.000 mm, skupna masa: 7.500 kg, Avtomatski stroj za brušenje robov z 10 programirljivimi profili za zaobljene robove. Fgsdpfxozpy Dre Antsg Predrezalnik. 10 čelnih površin. 4 faz. 2 vodila za hladilno tekočino. Podpora za kalibracijo. Smer gibanja traku od leve proti desni.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Na prodaj je OTT Alpha, robustna širokopasovna brusilnica za industrijsko uporabo. Ta stroj je idealen za kalibracijo in fino brušenje masivnega lesa, furnirja, MDF-plošč, ivernih plošč in drugih lesnih materialov. Preizkušena tehnologija OTT navdušuje s svojo stabilno konstrukcijo in zanesljivimi rezultati brušenja. Proizvajalec: OTT Tip: Alpha 110 Fodozrnlvepfx Antsgg Širokopasovna brusilnica Stroj za kalibracijo in fino brušenje Robustna industrijska izvedba Dimenzije v mm: 1860Š x 1970G x 2100V 1100 mm širina delovne površine maks. debelina obdelovanca 1600 mm, min. 3 mm Brusni trak 2150 x 1120 mm 4 + 8 m/min napredovanje 11 kW motor 10 litrov/min Teža: 2500 kg Napajalni trak z gumijasto podlago Brusna enota s širokim trakom Pnevmatična napenjalna naprava traku Pnevmatični nadzor brusilne glave Upravljalna plošča z jasno zasnovo upravljanja stroja Ampermeter za nadzor obremenitve Kazalniki tlaka za pnevmatični sistem Gumb za izklop v sili Velika vrata za vzdrževanje za enostaven dostop Integrirane priključke za odsesavanje Masivna konstrukcija stroja za delovanje z nizkimi vibracijami Idealno primerno za: Stolarske delavnice Delavnice za izdelavo pohištva Proizvodnjo pohištva Notranjo opremo Proizvodnjo vrat in oken Serijsko in posamično proizvodnjo Stanje Stroj je v rabljenem stanju z znaki uporabe, ki so posledica starosti. Izhaja iz stolarske delavnice in navdušuje s svojo robustno industrijsko kakovostjo. Ogled in preizkus stroja sta možna po dogovoru. Transport je možen po dogovoru in proti doplačilu! Pred prodajo bo stroj pregledan. Pri rabljenih strojih, izdelanih v letu 2009 ali prej, se pri prodaji poslovnim strankam izključi garancija. Tehnični podatki in oprema se lahko razlikujejo. Pridržujemo si pravico do sprememb, napak in medprodaje. Vse informacije so podane brez jamstva.

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2011011, Stroj za brušenje robov Montresor, model Lola 1000 8+6 SX • Smer gibanja traku: OD LEVE proti DESNI, leto izdelave 2011 #2011011 • 8 nosilcev za brušenje čelnih površin, 130 in 150 mm, z vertikalnim nihanjem • 1 nosilec za spodnje in 1 nosilec za zgornje faziranje • 2 pnevmatska nosilca za spodnje in 2 pnevmatska nosilca za zgornje faziranje • Vhodni del traku: kalibracijski/profilni nosilec Fjdpozwx Hujfx Antsgg • Izhodni del traku: nosilec za vodni curk • Konzola za podaljšanje mize • Potreben prostor za stroj, približno: 610 x 180 cm • Dolžina vstopne in izstopne poti: 250 cm Ponudba: • EXW, cena ob prevzemu stroja, zraven se obračunava DDV, pridržana pravica do prodaje medtem, orodja niso vključena, dodatni deli in pribor, prikazani na slikah, niso del stroja/obsega dobave. Način plačila • 50 % predplačila ob potrditvi naročila, 50 % plačila ob obvestilu o pripravljenosti za pošiljanje Garancija • Stroj se prodaja »kot je«, brez kakršnih koli garancijskih zahtev Možnost ogleda • v podjetju blizu Passaua Razpoložljivost • po dostavi novega stroja decembra 2026 / januarja 2027

Stanje: novo, Leto izdelave: 2024, Frame and Edge Press with Manual Hydraulic Press Units, single-sided, stationary > robust frame-welded construction > frame press unit with continuous left-hand support > 1 sliding carriage for width adjustment with positioning lock in 50 mm hole grid system, equipped with central locking drive bolt > 2 horizontally and infinitely adjustable manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke > 5 roller-mounted vertical pressure beams made from thick-walled profile tube, electro-galvanized, with manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke. Press units adjustable within a 50 mm hole grid. Counter support adjustable in 6 steps with anti-drop safety. Counter support and pressure plate, 140 mm long, 80 mm deep. > 1 hold-down device, electro-galvanized, for manual suspension, with screw-down pressure > Finish: grey white RAL 9002, pressure plate and counter support gentian blue RAL 5010. Fgodpfjyuxkex Anteg > External dimensions (W x H x D): 3340 x 2350 x 730 mm (long version: 3690 x 2350 x 730 mm) > optionally available with more or fewer vertical pressure beams (see accessories list) Usable size (W x H in mm) as frame press: 2700 x 1800 Usable size (W x H in mm) as edge press: 3000 x 1800 Price plus packaging: €92 net Special solutions available on request!

Stanje: zelo dobro (rabljeno), Kataloška številka: 7549 TEHNIČNI PODATKI največja širina obdelovanega elementa 1100 mm največja višina obdelovanega elementa 170 mm 2 agregata: 1) gumijast valj z rebrastim profilom za kalibriranje 2) gumijast valj + notranji valj + kovinski valj – od zgoraj: kovinski valj, drsni agregat kovinski valj, drsni agregat z notranjim valjem kovinski izhodni valj, drsni – od spodaj: potegovalni trak pneumatična oscilacija traku Fgodjzty Rtspfx Antjg električno dvigovanje mize 2 vrsti hitrosti podajanja motor 11 kW z zračno zavoro delovni tlak 6–8 bar premer odtočnega priključka 2 x 150 mm celotne dimenzije d/š/v 1960 x 1700 x 2000 mm teža približno 2000 kg – nemška proizvodnja – 2 agregata – nerazbarvana – rabljeno brušilno orodje, zelo dobro stanje Neto cena: 31900 PLN Neto cena: 7595 EUR, odvisno od menjalnega tečaja 4,2 EUR (Cene se lahko spreminjajo glede na večje nihaje menjalnega tečaja)

Stanje: zelo dobro (rabljeno), Dolžina police: 225 cm Fgsdpfx Aszvnq Hjntjg Širina police: 135 cm Maksimalna višina grelnega elementa: 40 cm Maksimalna temperatura: 120 °C Skupna moč: 14 kW

Stanje: rabljeno, Leto izdelave: 2007, Pnevmatična hidravlična preša za grelne plošče Fgedszuzxnjpfx Anteg Proizvajalec: OTT Tip: Solid 16-32 Letnik izdelave: 2007 Tehnični podatki Opomba: Tehnični podatki in opisi so kopije prvotne potrditve naročila. Podani podatki so namenjeni samo informativnim namenom in niso zavezujoči.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SM240101, vrsta vhodnega toka: trifazni, skupna širina: 3.500 mm, skupna dolžina: 14.000 mm, vhodna napetost: 380 V, moč servomotorja: 15.500 W, skupna masa: 7.000 kg, dolžina rezanja (maks.): 1.650 mm, Popolnoma avtomatski lepilec škatel z zaklepom dna SOOME 1650 (2024) / Fully Automatic Folder Gluer with Bottom Lock SOOME 1650 (2024) Prodamo praktično nov, popolnoma avtomatski stroj za lepljenje in zaklepanje dna škatel (Bottom Locking Type) proizvajalca HEBEI SOOME. Stroj letnika 2024 je v vrhunskem stanju in primeren za najzahtevnejšo embalažo. Tip: Automatic Folder Gluer, Bottom Locking Type SOOME GD-B 1650 Fsdpfszil Nysx Antsgg Letnik: 2024 Efektivna širina: 1650 mm Moč: 15.5 kW Stanje: Odlično, kot nov. Stroj se nahaja v Sloveniji (Celje). Kupec sam organizira demontažo in transport. Na voljo imamo tudi ostalo opremo za kartonažo Flexo Printer EMproject 89, stroj za razrez papirja (Slitter Rewinder) YYS-I, letnik 2023).

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, skupna dolžina: 7.920 mm, trajanje garancije: 3 meseci, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system, approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR glue and cleaning the system is quick and easy, taking only a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high gloss and super matt finishes! Fgjdex Emf Depfx Antjg One absolute highlight of the machine is the multifunction package, which proves especially beneficial for operations processing a variety of edge types. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on requirements—from the longitudinal trimming unit and corner copying to profile scraping. The extendable workpiece support and extended infeed area provide additional support when handling large panels. A guidance system assists with feeding small workpieces into the machine. Edge thickness – coil material: 0.4 – 3 mm (material-dependent) Edge thickness – strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min. Glue application with GlueJet using EVA and PUR glue types, with minimal effort. Compatible with all standard edge materials, including high gloss and super matt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue quantity management Ready for integration with RETURN systems Motorized pressure bridge with top belt drive Multifunction units for fast setup – radius, flush, chamfer operations Spraying units, vertical & horizontal and much more. Delivery, installation, and machine training can be offered by us for an additional fee. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions (GTC) can be found on our homepage at holzher.de/de/agb.

Stanje: dober (rabljeno), Leto izdelave: 2015, številka stroja/vozila: 0-200-24-0779, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 55 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, skupna dolžina: 10.825 mm, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and post-processing of various edge materials. Fixed fence on the left. Year of manufacture 2015. SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed unit, - Maximum workpiece thickness 60 mm - Motorized height adjustment of upper pressure unit - Workpiece support with roller rails - Glue pot lift for feed stop - Glue roller clamping in front of trailing edge of the workpiece - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit with 2x4kW (clockwise/counterclockwise), operation-controlled Horizontal positioning via NC motor (CAN bus) GLUING SECTION A20, comprising: - QA60 glue application unit with PTFE (Teflon) coating - Pre-melter for EVA glue - Suitable for both EVA and PUR adhesives - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) for edge thickness, 1 powered, 4 non-powered pressure rollers POST-PROCESSING SECTION: - PK25 end trimming unit, horizontal, 2 motors at 0.8 kW each (front/rear edge), for chamfering/straight cuts and excess trimming - Pre-/flush trimming unit 1.15 kW, top/bottom Fodpfjztl Scox Antegg - FK11 corner rounding unit, 2 motors (top/bottom) with motorized fine adjustment, controlled from operating panel, equipped with various interchangeable heads with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraper, top/bottom - Flat scraper, top/bottom - Buffing unit, top/bottom CONTROL: PC 23 powerTouch - woodCommander 5