Mobilni Regal / Zložljivi Vozički nakup rabljenega (2.636)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 300 kg, skupna višina: 2.400 mm, nosilnost: 2.000 kg, globina grla: 2.000 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k pravočasnemu prevzemu, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026! TEHNIČNE PODROBNOSTI Ksdpfx Aloyn E Hds Njlr Nosilnost: 2.000 kg Doseg: cca 2.000 mm PODROBNOSTI O STROJU Dimenzije in teža Dimenzije (D x Š x V): 2.000 x 1.000 x 2.400 mm Teža: 300 kg OPREMA Električni verižno dvigalo Zunanja referenca: Pieper – Lot 76

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H18/X2090/202/00162, nosilnost: 14 kg, doseg roke: 1.000 mm, natančnost ponavljanja: 0,03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum speed: 16.8 °/s Maximum speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 - 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 Overall system protection rating: IP20 Maximum average ground contact pressure: 10 N/mm² Drive type: Differential drive EQUIPMENT Ksdpfxoyzyxcj Al Nelr Tool storage station: 4 tools per storage station Tool change system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic effects: 4 LED units, memory for up to 16 audio files

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 200 kW (271,92 KM), skupna masa: 800 kg, skupna dolžina: 3.900 mm, skupna širina: 1.800 mm, Mobilni parni generator, proizvajalec Steamrator, letnik 2016, popolnoma delujoč. Rezervoar za olje: 100 litrov Rezervoar za vodo: 800 litrov Kjdpfx Aetiwbdjl Nslr

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 951115980, Tov. št.: 82950936 Maks. format (cm): 48x32 Kljdpjxmhi Defx Al Ner

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 27830/85, (PACKAGE INSERT FOR MEDICATIONS) Paper formats (cm): max. 36x52 A3+ // min. 8x10 Pockets: 4 Knives: 1 Station: TS36/4J Feeder: FT36J Folding unit: KB36 Kledorigrpspfx Al Ner

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), številka stroja/vozila: L. 09/31, Manufacturer no.: 0270180/1 Pockets: 4 parallel folds Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / further details: With A45/1A-DC delivery unit Cross fold not possible Kledjhpyr Uepfx Al Nor Power supply: 400 V

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), številka stroja/vozila: 99051725, Format (cm): 35x45 Equipment / Further details: Pockets: 2 Folding types: Roll fold, zigzag fold, double parallel fold, single fold Bottom-suction feeder: 30,000 sheets/h Friction feeder: 20,000 sheets/h (at parallel fold A4, 80 g/m²) Paper weight: 40 – 250 g/m² (for single parallel fold) Kljdpfxeh Eva Ho Al Nsr Electrical connection values: Mains voltage: 230V Current consumption: max. 10A

Leto izdelave: 2025, obratovalne ure: 1.050 h, stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Alzinger Lepton 5100 – Solution for the Bio-Waste Ordinance (BioAbfV) Ideal for biowaste separation: Easily comply with the statutory 1% contamination limit! As of May 2025, biowaste may only be processed if the impurity content is below 1.0 wt-%. Our Lepton 5100 is designed precisely for this requirement. Advantages of the Lepton 5100: Separation instead of shredding Gentle bag opening: Waste bags are reliably opened without being shredded. A pre-shredder (slow-speed shredder) is not required! Maximum film size: Films remain largely intact and are efficiently removed during the first screening step before being fragmented during composting (by turning, heat, and UV exposure). Optimum product purity: Prevents microplastics in the process and ensures superior final product quality. Economic benefits: Legal compliance: Reliably falls below the 1% limit of BioAbfV. Process optimization: Reduced effort for downstream cleaning. Cost efficiency: Significant savings on diesel and wear costs, as a pre-shredder is not required. Integrated air separator: No need for additional bulky machines. Saves space and maintenance costs. Process innovation (flexibly configurable): Biowaste processing (2-fraction): Reversible mid-size grain conveyor combines medium and fine fractions homogenously. Result: Clean target fraction for digestion/composting plus oversize with films/impurities. Compost refinement (3-fraction): Separation into premium compost, structural material, and energy wood. Ballistic effect removes stones, glass, and hard plastics via stone conveyor. Integrated air separator eliminates final film residues. Current application: Successful biowaste preparation for wet digestion. The machine delivers a homogeneous, contaminant-free fraction for the digester, preventing floating or sinking layers. Inspection & demonstration: On-site demonstration available at our partner facility in the Kelheim district. Process discussions possible directly with plant operators. Technical data: Model: Lepton 5100 | Year: 2025 | Approx. 1,050 hours Location: D-84069 Schierling | Availability: Immediate Screen decks: Deck 1 (52mm), Deck 2 (43mm) Equipment: Variable dosing roller, volume measurement, wind sifter preparation, compressor, LED package, radio remote control. Drive: Diesel-electric (Perkins 58kW, without AdBlue) + option for external power supply (400V 63A). Transport dimensions: L: 11.97m / H: 3.98m / W: 2.53m (No special permit required). Screen materials: Compost, green waste, biomass, wood, waste, RDF. Condition: Very good, fully operational, machine will be fully reconditioned in our workshop prior to sale. Klsdpfsy Elwfjx Al Nor

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1990, 🔧 Tehnični podatki Proizvajalec: Liebherr Werk Biberach GmbH Tip / Model: 28K Leto izdelave: 1990 Tip žerjava: Spodnji vrtljivi (stolpni žerjav) Dvižni razred: H1 Konstrukcijska skupina: T2 Standardi: DIN 15018 / ÖNORM B 4004 ⚙️ Opis Klasičen, zanesljiv gradbeni žerjav Preprosta in preverjena tehnika Idealno za gradbišča, gospodarstvo ali dvorišča Kompaktna zasnova – prilagodljiva uporaba Klodoy Ar Irspfx Al Ner 🏋️ Zmogljivost Maksimalna nosilnost glede na iztegnitev cca 1.000 – 1.200 kg Balast prisoten (podvozje in vrtljiva ploščad) 📌 Stanje Rabljeno, ustrezno starosti Preverjena funkcionalnost Ogled možen kadarkoli

Stanje: rabljeno, Leto izdelave: 1996, Premer sesalnega nastavka: 160 mm Kledpfx Alsyffx Ij Nor Maksimalni volumenski pretok: 1770 m³/h Nazivni volumenski pretok: 1448 m³/h Nadzor volumenskega pretoka: prikaz diferenčnega tlaka Podtlak: 1570 Pa Filtrirna površina: 10,5 m² Preostanek prahu: manj kot 0,2 mg/m³ Raven zvočnega tlaka: Prostornina vreče za odrezke: Čiščenje filtra: pnevmatično, jet čiščenje Moč motorja: 2,2 kW Dolžina stroja: 1600 mm Širina stroja: 700 mm Višina stroja: 2200 mm Teža:

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1 km, moč: 170 kW (231,14 KM), vrsta goriva: dizel, lastna masa: 10.500 kg, skupna masa: 14.100 kg, velikost pnevmatike: 395, konfiguracija osi: 4x4, medosna razdalja: 3.850 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: drugo, Leto izdelave: 2026, Oprema: ABS, dodatne luči, filter saj, hidravlika, klimatska naprava, navigacijski sistem, pogon na vsa štiri kolesa, računalnik na krovu, spojka prikolice, tempomat, zapora diferenciala, žerjav, Crane Unimog Special Edition KARL – Special Model! Unimog U5023 equipped with HMF crane featuring 6 hydraulic extensions and winch! – Platform basket available as an option! The Unimog has an overall height of only approx. 3.68 m, even with the large Michelin tires! Key equipment features – detailed specifications upon request – of the Unimog: - Central tire inflation system - Off-road reduction gear group - Automatic Shift EAS - Transmission PTO - Rear cross member for increased towing capacity - Trailer hitch - Air conditioning - Driver air-suspension seat - Front and rear view cameras with monitor - Digital tachograph, generation 2 - Exhaust system with upward tailpipe - High performance engine brake HMF 1620 crane with 5 hydraulic extensions and winch – work basket available as an option! ==> Scharmüller trailer drawbar with truck coupling and/or passenger car coupling – with truck homologation (exclusive and our specialty) In combination with the Scharmüller cross member and Scharmüller trailer sledge, the following permissible trailer weights are possible: - Trailer with continuous braking system: 21,000 kg - Trailer with overrun brake: 3,500 kg - Trailer without brakes: 750 kg - Central axle trailer: 13,000 kg, maximum vertical load: 1,000 kg  This transforms the U5023 into a multifunctional towing vehicle – from passenger car trailers, to central axle trailers (ZAA), to classic turntable trailers; with every conceivable coupling height, you have the right hitch!  Perfect for operating your crane, as the Unimog is compact and capable of towing very long trailers. Klsdpfekqfq Aex Al Njr  Our special edition also features a crawler gear group in the transmission: ideal for maneuvering, allowing clutch-friendly and precisely controlled speed selection at all times. Offer subject to change and availability – prior sale reserved. The Unimog is still in occasional use, thus mileage may vary!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 1 km, moč: 170 kW (231,14 KM), vrsta goriva: dizel, lastna masa: 8.500 kg, največja dovoljena obremenitev: 1.400 kg, skupna masa: 9.800 kg, velikost pnevmatike: 405/70 r20, konfiguracija osi: 4x4, medosna razdalja: 3.850 mm, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: drugo, dolžina tovornega prostora: 2.550 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, Oprema: ABS, dodatne luči, filter saj, hidravlika, klimatska naprava, navigacijski sistem, pogon na vsa štiri kolesa, računalnik na krovu, spojka prikolice, tempomat, zapora diferenciala, žerjav, Your advantages when reading on: - Available at short notice, brand new, and attractively priced as a special model This highly off-road-capable Unimog 4023 gets you to any site and, with its optimally sized loading crane, comes equipped with a tireless assistant to support all your lifting and assembly tasks, helping you work efficiently and boost your productivity. Its exceptional durability also ensures the Unimog's long-lasting value retention, making it a highly economical choice for you. The crane features 4 extensions and a cable winch to ease and support assembly operations. Attached you will find the load chart for this crane. The rear stabilizers stay within the vehicle’s contour, allowing space-saving set-up and operation. Where conventional trucks run out of space, the Unimog still fits. Special mention must be made of the Scharmüller sliding drawbar in combination with the crossmember and struts. Utilising this, the trailer load is increased, and a support load for central axle trailers becomes possible! This makes the "Kranimog" a compact and multifunctional towing vehicle that can handle particularly long trailers. Height-adjustable trailer coupling: As a unique feature, this comprehensive concept includes a height-adjustable trailer coupling, enabling you to tow a wide range of trailers. The following trailer loads apply: - Maximum trailer load for turntable trailers: 14,700 kg - Maximum trailer load for central axle trailers: 13,000 kg - Maximum support load: 1,000 kg - Maximum trailer load for braked car trailers: 3,500 kg All values are expressly approved by the vehicle manufacturer for truck registration and will be entered into your Unimog’s vehicle documents. Flatbed: - Internal length: approx. 2550 mm - Internal width allows for 2 pallets to be loaded crosswise and matches the crane’s width visually - Wooden floor - Aluminium drop sides, approx. 400 mm high - Aluminium headboard, approx. 600 mm high - No corner posts – ideal for unloading - Drop sides detachable We are happy to assist you; please schedule a callback, and we will check how we may help. Unimog Equipment: (Excerpt) - RT2 Dunlop SP9 405/70 R20 on deep bed rims 11x20 - B1V Parking brake on front axle - B5B Trailer braking, 2-line system - D6F Air conditioning - DE4 Electric window lifters - DF3 Air-sprung driver’s seat with seat heating - E2J Circuit breakers - E40 ABS trailer socket 24V - E41 Trailer socket 24V, 12-pin - E83 Acoustic differential lock warning - EF3 Reversing camera - EM5 Monitor for camera - F3W Cab tilting mechanism - F64 Tilting fittings for cab Kljdjkqfquspfx Al Nsr - G22 Off-road group - G48 EAS - G50 Gearbox oil cooler - JV5 Radio preparation, DAB radio with navigation function – including short DAB shark antenna - K7A Vertical exhaust - L32 Stone guard grille for indicator lights - LH6 Stone guard grille for rear lights - N16 Fast gearbox PTO - Q32 Crossmember for increased trailer load - TF7 Weight variant 9.8T (4.6/5.5) - Special offer – only while stocks last and subject to change

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Kljdpfxed Tbbde Al Nsr - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg Kedpfsmhhx Iox Al Nslr - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Kljdpfx Alomhhyaj Nor Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany Kedpfod Tqalex Al Njlr - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. Kjdpeh Ek Dajfx Al Nelr The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany Kjdpfx Aefdkb Uel Njlr - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Kjdpfxjfdkbhj Al Nelr - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Kljdpfxomhhf Sj Al Nsr Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Kjdpfxomhhl Ho Al Nolr Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm Kedpfx Aomidyfol Nslr - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) Kledpfxomkixws Al Nor - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Kledpfx Alsqt Dmys Nor Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: rabljeno, številka stroja/vozila: IC1243, Leto izdelave: 2019, obratovalne ure: 1.773 h, nosilnost: 1.400 kg, vrsta motorja: Električni, proizvajalec: Jungheinrich Klsdpfx Alsxr Skis Ner