Mep* Avtomatska Tračna Žaga Z Valjčnim Transporterjem In Dolžinskim Prislonom nakup rabljenega (126.059)

Stanje: rabljeno, Leto izdelave: 2005, Premer reza 230 mm Bwodpfx Aoy N D Nbofrjn Hitrost reza 35 - 70 m/min Širina reza 260 x 200 mm Dolžina žaginega traku 2720 x 27 x 0,9 mm Skupna potrebna moč 1,1 kW Teža stroja pribl. 0,68 t Prostorske zahteve pribl. 1,8 x 1,8 x 1,6 m

Stanje: novo, Cutting diameter, round: 230 mm Cutting diameter, square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Band speed: 15 - 100 m/min Total connected load: 2.2 kW Machine weight: approx. 1.2 t SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, alloyed steel, solid and profile materials, with a maximum remnant length of 60 mm. Bsdpfx Afofg E Hyorjwn - Maximum cutting cross-section: 230 x 230 mm. - Numerically controlled bandsaw with a new Windows “CE” based IGE system, specially developed by MEP for automatic operation. FEATURES: - User interface with 7” touchscreen display and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters. - Safety enclosure in compliance with the latest Machinery Directive EN 13898/2007 safety standards. - New fieldbus communication system with dual microprocessor and serial interface. - Robust cast iron construction (G25) to compensate for vibrations, increase machine stability, and extend the service life of the saw blade.

Stanje: novo, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° square: 250 mm Bwjdpfx Aefg E H Ejfrsn Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Blade speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.1 t Space requirement: approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electro-hydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic and manual operation modes - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle for single cuts outside of serial production, possible directly without programming. - Numerically controlled bandsaw with the new, Windows CE-based control unit specifically developed by MEP for automatic machines. - User interface with 7" touchscreen display and mechanical buttons for operational functions - Infinitely variable cutting speed regulation from 15 to 100 m/min via frequency inverter - Material feed with stepper motor via recirculating ball screw, mounted on opposing ball bearings; single stroke: 600 mm, repeatable to cut any length. - Automatic cutting pressure monitoring via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Chip removal brush - Bimetal bandsaw blade for solid and profile material - Tool kit and operating instructions with spare parts list

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Bwodpfx Aevxwkfjfrsn Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.

Stanje: novo, Leto izdelave: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specifically developed for cutting profile and solid materials made of aluminium castings, copper, and hard plastics. An automatic material feed as well as automatic cutting motion make it ideal for fast and precise series production! Material feed is up to 700 mm per stroke. Multiple strokes for longer sections can be conveniently programmed from the control panel. The main vice clamps the material using two horizontal and two vertical clamping cylinders; the feed vice uses one horizontal and one vertical clamping cylinder. Cutting and feed speeds are adjustable according to the material being processed via the large, clearly laid out control panel. The machine features a mechanical stroke height adjustment, with a maximum cutting height of 100 mm. A large protective hood covers the entire working area and is pneumatically lifted at the push of a button. The standard configuration for the UK 350 A 90° CNC + drilling unit includes an air blow gun for cleaning the machine. Connections for chip extraction systems are provided. This machine is equipped with the TR 14 vertical drilling unit (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • Machine for 90° cuts, with powerful drive motor • CNC control; input of quantity and section length conveniently via the large, user-friendly control panel • Storage for up to 20 cutting programs • Servo-driven feed; single stroke feed up to 700 mm (for longer sections, the feed is automatically repeated up to the desired length) • Main vice with 4 pneumatic clamping cylinders – 2 horizontal, 2 vertical • Feed vice with pneumatic horizontal and vertical clamping cylinders • Large protective hood, covers the entire working area, pneumatically lifted • Variable adjustment of cutting and feed speed • Maximum cutting height 100 mm • Air blow gun for machine cleaning • Connections for extraction system Bsdskqz H Dspfx Afrjwn • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with tool holder • Spindle speed, drilling depth, etc. are set via the machine control; drilling cycle is automatic Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade size: 350 x 32 mm Material feed per stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! We look forward to your inquiry! Plantec Maschinen GmbH

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stable roller conveyor with hydraulic lifting and lowering cross conveyor. Conveying length up to end stop: 6.0 m. Total length: 7.10 m. Roller length: 1,600 mm. Roller diameter: 200 mm. Bwodjt A U Dyopfx Afren Integrated hydraulic lifting and lowering cross conveyor with 6 chain strands. Hydraulically raiseable and lowerable. All bearings renewed completely prior to decommissioning.

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting capacity flat: 300 x 260 mm Saw blade length: 3920 x 34 x 1.1 mm Table height: 780 mm Blade speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused exhibition machine!!!! 2-column high-performance automatic bandsaw of the SBS series • Modern SNC 20 control in CNC configuration • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic blade tension • Adjustable clamping pressure • Double vice (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables convenient and user-friendly input of up to 20 different sawing jobs (length and quantity). When the desired dimensions are entered, the control automatically calculates the cutting waste and the number of feed cycles. In addition, the error code display system allows for fast troubleshooting. Bwodpfx Afsxfwbtsrjn Including band run-off detection (€1,800)

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Control system: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cutting start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover Bwodpjd Iipzjfx Afrjn • Fine feed adjustment • Semi-automatic cutting! • Optimize workflows through CNC control Input options for various parameters such as quantity and material length, automatic offset calculation for the cutting channel • CNC control for 10 different sawing programs with 99 sub-programs each for different lengths and quantities (e.g. 1 sawing program with various section lengths) • Automatic feeding unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnants length 170 mm.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover Bwodpfeupw R Asx Afrjn • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS421 vertical band saw for wood has been designed in a vertical layout, which in practice means convenient material feed on the table and the ability to perform both straight and curved cuts. In production applications, structural rigidity is crucial – that’s why the frame and main supporting elements ensure stable wheel alignment, guaranteeing consistent blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality is determined by guidance geometry. Properly selected drive wheels ensure smooth blade operation along its entire length, reduce slippage, and minimize localized overloads. This results in: - Reduced vibration sensitivity even at higher feed rates - Improved edge quality, especially in harder wood species - Extended blade life due to stable operation and correct tensioning Work Table and Angle Adjustment The work table provides material support and cut repeatability. For the CORMAK HBS421 wood band saw, both its stability and the ability to adjust the settings are important, allowing for angled cuts. This is a valued solution in woodworking shops, where quick transitioning between various operations (sizing, preparing structural elements, trimming) is required. Drive and Continuous Operation The band saw’s drive is selected for heavy-duty use, and three-phase power supply improves running smoothness and torque stability. As a result, the vertical band saw for wood maintains cutting parameters even with thicker materials, which is essential in serial production. Blade speed selection allows you to optimize work for the current task, reducing edge burning and improving blade control. Dust Extraction and Workplace Ergonomics Wood cutting generates considerable amounts of dust and chips. The integrated extraction port enables connection to a dust collection system, which provides real benefits: - Improved operational safety (less airborne dust) - Clearer cutting line visibility - Increased longevity of working components by limiting dust build-up Precision and Work Efficiency In industrial practice, it’s not just about cutting material, but also repeatability. The rigid frame, stable blade tracking, and controlled tensioning ensure straight cuts and reduce the need for rework (planing, sanding, fitting) at subsequent stages. Thus, the CORMAK vertical band saw for wood supports shorter cycle times and reduces material waste. Applications Standard Equipment - Switch with high-voltage trip Bodpsyk Apnofx Afrjwn - Extraction port 2×100 mm - Precision fence - Saw blade 3345×20 mm, 8 TPI Optional Equipment - Extraction hose 100 mm - Galvanized clamp - Mobile base up to 260 kg Technical Data Wheel diameter [mm]: 480 Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 x 435 Overall dimensions [mm]: 830 x 550 x 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): yes CE Declaration: yes

Stanje: novo, Leto izdelave: 2026, The CORMAK HBS321 vertical band saw for wood operates in a vertical arrangement, providing the operator with full control over material feed across the table. A key feature is its robust frame, which maintains the wheel and guide system geometry, translating to uniform blade tracking and consistent cutting accuracy. In practice, this means a reduced risk of blade drift, which is especially important when working with harder wood species or at greater cutting heights. 350 mm Wheel Diameter and Blade Tracking Control Cast Iron Work Table and Angular Settings This woodworking band saw is equipped with a work table measuring 545 x 400 mm, providing ample support surface for the workpiece, crucial for precise straight and angled cuts. The table can tilt from 0 to 45°, allowing for angled cuts without the need for additional attachments. The use of cast iron effectively dampens vibrations, ensuring stable machine operation. Drive and Working Parameters The band saw features a 1.1 kW motor, ensuring stable operation for typical woodworking tasks such as ripping, trimming, preparing components for gluing and assembly, as well as shape cutting. The ability to use blades from 6 to 15 mm wide allows for blade selection tailored to the job—from precise curved cuts to straight cuts requiring greater guide stability. Laser Guide — Enhanced Control & Reduced Material Waste The laser pointer aids in quick alignment of material and maintaining the intended cutting path. This results in fewer trial cuts, less material waste, and easier handling of details requiring precise guidance (e.g., profiled components, shape cutting). Precision and Work Efficiency In professional use, not only is cutting capability important, but so is repeatability. The rigid structure, stable table, and quick blade adjustment minimize machine setup time and reduce the need for rework in subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw helps maintain workflow and increases process efficiency. Applications The HBS321 band saw is designed for a wide range of woodworking and wood-based material processing tasks, including: - Cutting boards, beams, and laminated components - Trimming furniture and joinery components Bjdpfx Afjyk Aliorown - Angled cutting (with table tilt) - Cutting shapes and profiled elements - Workshop use in carpenter's shops, craft workshops, and training studios Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Work table dimensions (L x W) [mm]: 500 x 400 Table tilt [°]: from 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Dimensions (L x W x H) [mm]: 750 x 650 x 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): yes CE Declaration: yes Standard Equipment - ON/OFF switch with low-voltage trip - Quick-release blade tension/relief lever - Precision rip fence - Saw blade 2560x10 tpi 6.3

Stanje: rabljeno, Leto izdelave: 2022, številka stroja/vozila: 15084, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 420 mm, lastna masa: 3.100 kg, dolžina rezanja (maks.): 200 mm, dolžina žaginega lista: 5.500 mm, model motorja: IE3, Oprema: dokumentacija / priročnik, AVTOMATSKA VODORAVNA TRAČNA ŽAGA ZA REZANJE LAMEL MOD. TS400 – V SKLADU S CE PREDPISI - RABLJENA - Naprava z dvema hitrostma - Največja zmogljivost rezanja 420x200 mm. - Razdalja med rezilom in trakom 2-150 mm. - Minimalna debelina reza od zgoraj 0,75 mm Bwsdpfxeyam U To Afrjn - Premer koles 800 mm. - Širina koles 50 mm. - Dolžina rezila 5500 mm. - Kombiniran sistem hlajenja z oljem - Hidravlični napenjalni sistem 2500 kg - Variabilna hitrost podajanja 0-25 m/min - Podajalni motor 2 KM z inverterjem - Glavni motor z inverterjem 30 KM - Dvižni motor 0,5 KM - Št. 3 odsesovalne odprtine 100 mm. - Motor razreda IE3 - Offset naprava - Serijska št. 15084 - Leto 2022 - POPOLNA Z NAVODILI IN CE CERTIFIKATOM

Stanje: generalkompletno obnovljen (rabljeno), Dvojni stroj za žlebljenje z vrtalno enoto, za vretena s centralno luknjo. Popolnoma opremljen s polnilnikom, izhodnim trakom in nadzorom končnih cen. Bwodpfx Ajpk Taxsfron

Stanje: novo, Semi-automatic bandsaw with double-sided mitre (R/L 60°) Including hydraulic blade tension indicator Minimum quantity lubrication retrofittable Cutting capacity: Boded Dpzgopfx Afrown 90° round: 280 mm / flat: 410 x 280 mm / square: 280 mm 45° R round: 280 mm / flat: 310 x 150 mm / square: 270 mm 45° L round: 280 mm / flat: 330 x 100 mm / square: 280 mm 60° R round: 210 mm / flat: 205 x 100 mm / square: 190 mm 60° L round: 220 mm / flat: 225 x 100 mm / square: 210 mm Material support height: 756 mm Saw blade dimensions: 3800 x 0.9 x 27 mm Cutting speed: 20-120 m/min Drive power: 2.2 kW Dimensions (LxWxH): 2130 x 1070 x 1440 mm Weight: 530 kg Price on request

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.920 kg, model krmilnika: Siemens Simatic HMI, premer rezanja: 320 mm, hitrost rezanja: 130.000 mm/min, dolžina tračnega lista: 6.300 mm, Stroj je bil leta 2016 obnovljen s strani Kasto! TEHNIČNI PODATKI Premer reza: 320 mm Dolžina tračne žage: 6.300 mm Območje reza: 420 x 320 mm Hitrost rezanja: 20 - 130 m/min Višina materialnega podstavka: 950 mm Bwedpfxjywhdfj Afrsn PODROBNOSTI STROJA Krmiljenje: Siemens Simatic HMI Skupna priključna moč: 15 kW Dimenzije in teža Prostorske zahteve: pribl. 6,35 x 6,76 x 2,41 m Teža stroja: pribl. 2.920 kg Pnevmatski priključek: 6 bar Hladilna tekočina: 75 l Zmogljivost črpalke: 40 l/min OPREMA Hitrost pomika reza nastavljiva brezstopenjsko Valjčna proga Transporter za ostružke Tehnična dokumentacija Stroj se dobavi brez robota in sistema za nakladanje. Stranka mora stroj preprogramirati za samostojno uporabo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, leto zadnje generalne obnove: 2020, Oprema: CE označba, Avtomatska tračna žaga – prečno in ravno rezanje – stroj je bil leta 2020 obnovljen in je v odličnem stanju – enostaven za uporabo – robustna in dolgotrajna izdelava, narejeno v Italiji. Bsdpfxoy S Dbpj Afrswn

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Manufacturer: Kraus H20-23 Roller conveyor: Kraus RBA Year of manufacture: 2017 Board length: 1600 mm Board width: 1400 mm Roller diameter: 100 mm, material: steel Axle spacing between rollers: 120 mm Load capacity: 2000 kg Lifting height: 1700 mm Bodenr Hfyepfx Afrown Without hydraulic power unit! Chain drive, with geared electric motor 1.1 kW, 400 V, 50 Hz

Stanje: zelo dobro (rabljeno), Bandsaw grinding machine VOLLMER model Liliput Bwsdoralpyepfx Afron

Stanje: rabljeno, Vertical Bandsaw PEHAKA Type SM 4 Bwedeiv A U Espfx Afrsn Serial No. 27060 Year of manufacture: approx. 1980 Throat depth: 380 mm Table size: 620 x 480 mm Cutting height: 250 mm Wheel diameter: 400 mm Working height: 1120 mm Saw blade length: min. 2900 - max. 3100 mm Saw blade speed: 22–125 m/min, stepless Motor power: 0.6 / 0.75 kW Power connection: 380 Volt, 50 Hz - Stepless adjustment of blade speed via variomatic belt drive with lever adjustment and 2 motor speeds - Saw table tiltable +/- 15° - Blade butt-welding machine IDEAL BS 0-16 - Blade shear - Base frame made of U-section steel 100 x 50 mm, mobile with pallet truck Required space (L x W x H): 1050 x 800 x 1950 mm Weight: 355 kg Good condition

Stanje: novo, Leto izdelave: 2026, Model CUBO 400 NC is a state-of-the-art band saw that ensures operator safety with a guard system made of specially designed metal sheets, protecting all four sides and all moving parts of the saw. The guard system allows full access to the machine and makes maintenance easy. Bsdpfx Afjyym Eaorewn An innovative and user-friendly 7" touchscreen with an intuitive interface offers complete control over all machine settings. It allows programming of up to 99 cutting programs and 10 different cutting lengths on the same bar. CNC control provides access to all machine operating functions: automatic blade thickness calculation, stroke repetition count, band speed, and blade descent speed. The interface also displays CUBO operating status and enables error diagnosis via an auto-diagnosis feature. The integrated feeder enables automatic repetition of the cutting process. The feeder moves on a hardened and chromed guide; high positioning accuracy is ensured by a precise feed using a backlash-free ball screw (self-braking) mounted on a floating plate to absorb loads from irregular bars. The saw body features a rigid cast-iron structure made of square-section tubing, providing excellent resistance to deformation and improved performance with all types of material. The arc is equipped with an endless screw and a high-resistance bronze alloy crown. A mechanical material detection device ensures rapid blade approach to the material, automatically detecting the first cutting point. The end cut is controlled by a microswitch on the blade guide, allowing ideal band positioning thanks to hardened metal pads and additional bearings. IMET automatic machines can be connected to the company network and operated remotely using the SAWFACTORY system and modem. SAWFACTORY is dedicated software that enables cut-process management from the office, including program setup and live monitoring via a web application. The software also allows for remote technical support. Technical specifications: POWER SUPPLY: 3-phase 400V TOTAL POWER: 2.2 kW ARM DESCENT CONTROL: Hydraulically, with stepless adjustment CUTTING SPEED: 18-110 m/min VICE BASE HEIGHT: 890 mm BLADE DIMENSIONS: 4020 x 34 x 1.1 mm FEEDER LENGTH: 515 mm END CUT WASTE: 80 mm MINIMUM MATERIAL LENGTH: 15 mm DIMENSIONS: 1950 x 1800 x 1990 mm WEIGHT: 990 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, Horizontal bandsaw fully automatic with vise feed Cutting capacity 90° round 400 mm square 400 x 400 mm Cutting speed 15 - 90 m/min Working height 800 mm Saw blade dimensions 4570 x 41 x 1.3 mm Bwjdeynaz Nopfx Afron Material feed per stroke 560 mm Multiple feed up to 9 times = 5040 mm Motor power 5.5 kW Dimensions (L x W x H) 2250 x 2850 x 1700 mm Weight 2500 kg Equipment / Special Features: • Fully hydraulic: workpiece clamping, saw feed, bow lift, and material feed • Vise feed • Swarf (chip) screw conveyor • Fully automatic operation or single cuts • Automatic adjustment of bow lift height according to material diameter • Max. cut length 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw blade guidance via deflection rollers and carbide guides • Constant saw band tension with shut-off in case of saw band breakage • Coolant system • Piece counter • Emergency stop switch • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: novo, Leto izdelave: 2026, Condition: New Bjdpfx Afeyc Hd Terjwn Machine type: Twin-column automatic band saw Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (square): 325 x 380 mm Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Cutting speed: 15 - 100 m/min (infinitely variable) Main drive motor output: 3.7 kW Table height: 800 mm Coolant tank: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC automatic Single length cut: 0-403 mm Multiple length cut: 0-9,999 mm Remnant piece: 50 mm Weight: approx. 1,950 kg Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard equipment: - Touchscreen control - Infinitely variable cutting speed (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic cut compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide saw blade guide - Hydraulic chip conveyor - Vibration dampers - English manual - Machine feet - CE compliant Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor

Stanje: novo, Cutting diameter: 570 mm Saw band length: 7250 x 41 mm Cutting width: 1.3 mm Cutting capacity at 90 degrees (square): 550 x 550 mm Cutting capacity at 90 degrees (flat): 550 x 700 mm Total power requirement: 4 kW Machine weight: approx. 6,050 kg Space requirement: approx. 2,600 x 1,300 x 3,700 mm The KLS 550 x 700 is a semi-automatic, column-guided horizontal bandsaw. Standard Features Bwsdpfsymf Sdex Afren - Chip brush - Hydraulic blade guide - Hydraulic vice - Hydraulic blade tensioning - Blade breakage switch - Stop system - Automatic ball screw lubrication - LED lighting - Chip conveyor - Chip transport - 1,400 mm feed drive - Double roller table - Material end detector - Program memory system - USB output interface - PLC control & touchscreen - Frequency inverter Optional Features - Laser line - Oil mist lubrication - V-shaped vice - Extra double roller table - Upper clamping system - Sensor for detecting contour cutting

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.200 kg, Območje rezanja kvadratnega jekla pri 90°: 260 mm, dolžina žaginega lista: 4.115 mm, Avtomatska tračna žaga Kasto Ssb 260 Va Model: Ssb 260 Va Leto: 1998 Kapaciteta rezanja Ø 260 mm Moč glavnega motorja: 4 kW Avtomatski pomik: 600 mm Kapaciteta rezanja v kvadratu: 260 x 260 mm Mere tračne žage: 4.115 x 41 x 1,3 mm Skupna teža: 2.200 kg Vključuje: nove tračne žage Bsdsxf Hr Ispfx Afrjwn Interna koda: svr 323

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Zelo lepo ohranjen avtomatski tračni žagalni stroj z dvema stebroma in NC upravljanjem na napravi za merjenje dolžine. Kapaciteta Ø 360 mm maks. višina 360 mm maks. širina 380 mm Dimenzija tračnega rezila 4430 x 34 x 1 mm Hitrost traku brezstopenjsko nastavljiva od 25 do 112 m/min. Glavni motor 3,75 kW, skupna moč 4,7 kW Dovod posamezne poteze 500 mm, večkratni do maks. 4500 mm Bedpfx Afeyzcacerswn Stroj je opremljen s transporterjem za ostružke, gnano ščetko za ostružke in prav tako s sistemom za vpenjanje snopov.