Avtomatska tračna žaga Kasto 260

KASTO SSB 260 VA

Stanje: rabljeno, Leto izdelave: 1993, Hitrost rezanja: 15 - 125 m/min Isdpfxeywzxcs Aa Uear Rezkalni presek: 260 mm Dolžina tračne žage: 4.115 x 41 x 1,1 mm Širina reza: 260 x 260 mm Tračna žaga | KASTO - SSB 260 VA Stroj je v dobro vzdrževanem stanju. Upoštevajte, da so bili tehnični podatki prevzeti iz primerljivih strojev.

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. Iasdpjxdc Uvofx Aa Usr 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Stanje: rabljeno, Leto izdelave: 1989, Hitrost rezanja: 15 - 125 m/min Rezani presek: 260 mm² Dolžina žaginega traku: 4.115 x 41 x 1,1 mm Širina reza: 260 x 260 mm Tračna žaga | KASTO - SSB 260 VA Stroj je v dobro vzdrževanem stanju. Iajdpfx Aajywzw So Uor Upoštevajte, da so tehnični podatki povzeti po primerljivih strojih.

Stanje: rabljeno, Proizvajalec: KASTO Isdpsxcnppsfx Aa Uear Tip: SSB 260 VA Maks. velikost reza: 260 x 260 mm / Premer: 260 mm Teža: 1915 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 450 mm, hitrost vretena (min.): 25 obr/min, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 213 mm, pomik po osi Z: 450 mm, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 30 m/min, prehod palice: 65 mm, CNC Siemens 840 D Območje dela Največji premer vrtenja nad posteljo: 505 mm Premer vrtenja nad sani X: 375 mm Premer glave vpenjala: 210 mm Kapaciteta palice: 65 mm Prečni hod (X): 213 mm Vzdolžni hod (Z): 450 mm Pomiki Hitri pomik osi X/Z: 24/30 m/min Glavno vreteno Priključek vretena (ravna prirobnica): 140 h5 mm Iaodpew Adhwofx Aa Usr Notranji premer prednjega ležaja: 100 mm Glavno vreteno Moč motorja vretena (40/100% ED): 16/12 kW Navor (40/100% ED): 153/115 Nm Hitrost vretena: 25 - 6000 vrt/min Revolver za orodja Število orodnih postaj: 12 Od tega motoriziranih: 12 Premer stebla po DIN 69880: 30 mm Moč motorja (40% ED): 9 kW Maks. navor (40% ED): 20 Nm Maks. hitrost: 4500 min-1 Konjiček Hod konjička, avtomatski: 450 mm Vpenjalni konus: CM 4 Maks. pritisk konjička: 400 daN Oprema stroja: • Transporter za odrezke • Priprava za odsesovalec hlapov • 2 aksialna motorizirana modula • 4 radialna motorizirana modula • Fiksni držala za orodja

Stanje: rabljeno, Leto izdelave: 1991, številka stroja/vozila: 113307651086088, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 260 mm, skupna višina: 2.100 mm, skupna dolžina: 2.200 mm, skupna širina: 2.100 mm, dolžina tračnega lista: 4.115 mm, širina tračne žage: 38 mm,

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm Iaodpehzbipjfx Aa Uer - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: novo, TECHNICAL DATA Type: gas-heated pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Iedpfjg Dgymox Aa Ujar Number of control zones: 2 Max. loading weight: approx. 2.5 t Control system: Siemens S7

Stanje: dober (rabljeno), Leto izdelave: 2008, Velikost mize 1600 x 750 mm, nosilnost mize 1500 kg, pomiki XYZ 1525 x 762 x 625 mm, hitri pomiki 24 m/min, moč vretena 18,5 kW, hitrost vretena 6.000 obr/min, menjalnik orodij s 40 postajami, stožčasti vpenjalni del BT50, Iodpfx Aaoxwytcj Ujar hlajenje skozi vreteno, transporter za odrezke, krmilje Fanuc 21i.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed speed (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Through-spindle coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool measurement probe - Workpiece measurement probe: Renishaw RMP60 Ijdpfxow Ephbo Aa Uoar - Tool breakage control: SOFT AC - Number of pallets: 2 - Machine vice - Tool holder