Krožna Žaga Kaltenbach Kmr 100 Ap Hm nakup rabljenega (31.449)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Sierakowska Huta
932 km
Formatna krožna žaga z pomičnim vozom in predrezilom
REMADMMS-40/340
Pokliči
Stanje: zelo dobro (rabljeno), Catalogue number: 7853
TECHNICAL SPECIFICATIONS
- Max diameter of main saw blade without scorer: 400 mm
- Max diameter of main saw blade with scorer: 350 mm
- Main blade electrically adjustable up/down and for tilt
- Spindle diameter: 30 mm
- Spindle lock
- Comes with sliding table
- Includes crosscut table & angle stop
- Sliding table length: 3000 mm
- Max cutting width at rip fence: 1350 mm
Itodpfx Alsy At R Uo Nsf
- With side carriage
- With scorer
- Max scorer blade diameter: 120 mm
- Scorer motor power: 0.75 kW
- Main motor power: 6 kW
- Motor for height adjustment: 0.25 kW
- Motor for angle adjustment: 0.25 kW
- 3 spindle speeds: 3500/4500/6000 rpm
- Main table dimensions: 1220 x 650 mm
- Table extension/width: 1920 x 1450 mm
- Large blade guard
- Extraction port diameters: 80 mm, 125 mm
- Overall dimensions (LxWxH): 3500 x 3460 x 1500 mm
- Weight: 1000 kg
ADVANTAGES
– Polish-made
– Equipped with scorer
– Supplied with DTR documentation & CE certificate
– Used machine, in very good condition
Net price: 23,900 PLN
Net price: 5,690 EUR (based on EUR exchange rate of 4.2)
(Prices may vary depending on currency fluctuations)
Mali oglas
Sierakowska Huta
932 km
Prečna krožna žaga za rezanje
REMADMDK-50A
Pokliči
Stanje: zelo dobro (rabljeno), Kataloška številka 7937
TEHNIČNI PODATKI
- maks. premer žaginega lista: 500 mm
- premer vretena: 30 mm
- zgornji pnevmatski pritiskač
- zaščita za žagin list
- pnevmatski izvlek žaginega lista
- maks. višina reza: 150 mm
- maks. širina reza: 350 mm
- glavni motor: 5,5 kW
- premer odvodnih nastavkov: 120 mm
- mere delovne mize (dolžina/širina): 740x500 mm
- višina mize od tal: 900 mm
- valjčne mize: 2 kosa
- vhodna valjčna miza + vodilo: 2050 mm
- izhodna valjčna miza: 1650 mm
- širina valjčne mize: 510 mm
- skupne mere stroja brez mize (dolžina/širina/višina): 1200x640x1280 mm
- teža: cca 500 kg
PREDNOSTI
– proizvedeno na Poljskem
– originalna DTR dokumentacija
– 2 valjčni mizi
– pnevmatski dvig žaginega lista
– rabljena žaga, v odličnem stanju
Itodpfx Ajywtptsl Nof
Neto cena: 14.900 PLN
Neto cena: 3.550 EUR glede na tečaj 4,2 EUR
(Cene se lahko spremenijo glede na večja nihanja tečajev)
Mali oglas
Sierakowska Huta
932 km
Krožna žaga z predrezilom
HamechKS-400
Pokliči
Stanje: zelo dobro (rabljeno), Kataloška številka 7956
TEHNIČNI PODATKI
- maks. premer glavnega žaginega lista: 350 mm
- premer odprtine žaginega lista: 30 mm
- maks. višina reza: 90 mm
- glavni žagin list nastavljiv gor/dol in pod kotom
- zaščita za žagin list
- s stranskim vozičkom
Itedpfsyy Rqaex Al Nsf
- dolžina reza na vozičku: 1300 mm
- širina reza ob vodilu: 1340 mm
- glavni motor: 4 kW
- dimenzije mize: 1100 x 1030 mm
- dimenzije mize z razširitvijo in podaljškom: 2100 x 1840 mm
- s predrezovalnikom
- maks. premer predrezovalnega lista: 100 mm
- premer vretena predrezovalnika: 22 mm
- motor predrezovalnika: 0,55 kW
- 3 hitrosti vrtenja: 4000, 5000, 6500 obr/min
- premer odsesovalnega priključka: 125 mm
- mere d/š/v: 3280 x 2340 x 1450 mm
- teža: 866 kg
PREDNOSTI
– proizvodnja Poljska
– zaščita za žagin list
– s predrezovalnikom
– DTR dokumentacija
– rabljena žaga, v zelo dobrem stanju
Neto cena: 11.900 PLN
Neto cena: 2.840 EUR (odvisno od tečaja 4,2 EUR)
(Cene se lahko spreminjajo glede na večje nihanje)
Mali oglas
Sierakowska Huta
932 km
Formatna krožna žaga
REMAFx250 2000mm
Pokliči
Stanje: novo, KATALOŠKA ŠTEVILKA RE041
- Nov stroj
TEHNIČNI PODATKI
- Premer žaginega lista ⌀250 – 350/30 mm
- Premer predrezovalnega lista (deluje le z listom ⌀300, 350 mm) ⌀120/20 mm
- Moč glavnega motorja 4 kW
- Moč predrezovalnega motorja 0,75 kW
- Hitrost vrtenja 4000 obr/min
- Hitrost vrtenja predrezovalnega lista 8800 obr/min
- Nagib lista 0 – 45°
- Maks. dolžina reza 2000 mm
- Širina reza pri vzdolžnem vodilu 1250 mm
- Klin ⌀350 mm
- Premer prirobnice vretena 87,5 mm
- Kotno vodilo mize nastavljeno na 90° – 45°, natančnost ±1°
- Maks. višina reza z listom ⌀300 mm: 95 mm
Iodeyviupspfx Al Nstf
- Maks. višina reza z listom ⌀350 mm: 120 mm
- Premer zgornjega odsesovalnega priključka ⌀80 mm
- Premer spodnjega odsesovalnega priključka ⌀100 mm
- Teža 620 kg
- Dimenzije sestavljenega stroja d/š/v 2255x3460x1450 mm
Cena neto: 19.900 PLN
Cena neto: 4.740 EUR
Cena neto izračunana po tečaju 4,2 PLN/EUR
(Pri večjih nihanji tečaja se lahko cena spremeni)
Mali oglas
Sierakowska Huta
932 km
Krožna žaga z vozičkom
REMA DMLS-40 z podcinakiem
Pokliči
Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7541
Technical specifications:
- Max main saw blade diameter (without scoring unit): 400 mm
- Max main saw blade diameter (with scoring unit): 350 mm
- Saw blade bore diameter: 30 mm
- Max cutting height with 400 mm blade: 90° – 120 mm, 45° – 85 mm
- Max cutting height with 350 mm blade: 90° – 95 mm, 45° – 67 mm
- Main blade adjustable vertically and for bevel cuts
- Saw blade guard included
- Equipped with side sliding table
- Cutting length on sliding table: 1700 mm
- Cutting width on sliding table: 1400 mm
- Cutting width at rip fence: 1350 mm
- Main motor: 6 kW
Iodoyaq Nhjpfx Al Nstf
- Table dimensions: 1190 x 990 mm
- With table extension: 1880 mm
- With table elongation: 1890 mm
- With scoring unit
- Max scoring blade diameter: 120 mm
- Scoring spindle diameter: 20 mm
- Scoring motor: 0.75 kW
- 3 spindle rotation speeds: 3500, 4500, 6000 rpm
- Brake
- Extraction port diameter: 80/120 mm
- Dimensions (LxWxH): 3050 x 2200 x 1600 mm
- Weight: 800 kg
ADVANTAGES
– Manufactured in Poland
– DTR technical documentation included
– Saw blade guard
– With scoring unit
– With table extension and enlargement
– Used saw, very good condition
Net price: PLN 15,900
Net price: EUR 3,780 (based on an exchange rate of 4.2 EUR)
(Prices subject to change with significant exchange rate fluctuations.)
Mali oglas
Sierakowska Huta
932 km
Krožna žaga 450 mm z valjčnimi mizami
Piła poprzeczna
Pokliči
Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7918
TEHNIČNI PODATKI
- max. premer žaginega lista: 450 mm
- premer vretena: 30 mm
- pnevmatsko zgornje pritrjevanje
- zaščita za žagin list
- zaščita žaginega lista obenem služi kot pritisna zaščita
- pnevmatski izteg žaginega lista
- višina reza (pri širini 250 mm): 120 mm
- pri manjši višini bo širina večja
- glavni motor: 6 kW
- premer odprtine za odsesavanje: 120 mm
- dimenzije mize dolžina/širina: 650 x 850 mm
- višina mize od tal: 1000 mm
- valjčne mize:
- vhodna valjčna miza + zaskok: 3180 mm
- izhodna valjčna miza + zaskok: 2450 mm
- širina drsnega valja: 360 mm
- delovni tlak: 8 bar
- skupne dimenzije stroja (brez valjčnih miz) dolžina/širina/višina: 1300 x 1050 x 1800 mm
- teža: 550 kg
PREDNOSTI
– 2 valjčni mizi
– pnevmatski hod žaginega lista
Itodjyrr R Dspfx Al Nof
– rabljena žaga, stanje idealno
Neto cena: 14.900 PLN
Neto cena: 3.550 EUR glede na tečaj 4,2 EUR
(Cene se lahko spremenijo ob večjih nihanjih)
Mali oglas
Sierakowska Huta
932 km
Krožna žaga z vozičkom žage
REMADMMA-35
Pokliči
Stanje: zelo dobro (rabljeno), Kataloška številka 7833
TEHNIČNI PODATKI
- maks. premer žaginega lista: 400 mm
- premer luknje žage: 30 mm
- maks. višina reza: 110 mm
- glavni žagin list je nastavljiv gor/dol in pod kotom
- zaščita za žagin list
- z bočnim vozičkom
- kotnik
- dolžina reza na vozičku: 870 mm
- širina reza na vodilu: 600 mm
- glavni motor približno 4 kW
- mere mize: 900x1020 mm
- premer odsesovalnega priključka: 110 mm
- mere d/š/v: 2500x1400x1000 mm
- teža: 530 kg
PREDNOSTI
– izdelano na Poljskem
– z bočnim vozičkom
– tehnična dokumentacija DTR
– rabljena žaga, v zelo dobrem stanju
Isdpfxsyz Nycs Al Nstf
Cena brez DDV: 7.500 PLN
Cena brez DDV: 1.790 EUR (odvisno od tečaja 4,2 EUR)
(Cene se lahko spremenijo ob večjih nihanjih tečaja)
Mali oglas
Root
516 km
Krožna žaga
KALTENBACHKKS 400
Pokliči
Stanje: pripravljen za uporabo (rabljen), Stroj je odpojen od napájení.
Itodpfxjhva I Is Al Nsf
Mali oglas
Rödermark
625 km
Hidravlična krožna žaga za kovino
KALTENBACHKKS 400 E
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 119878, Oferta 26098
Datos técnicos:
- Diámetro de la hoja de sierra: hasta 400 mm
- Capacidad de corte a 90° hasta:
- redondo: 130 mm
- cuadrado: 120 mm
- plano: 305 x 40 mm
o bien 240 x 85 mm
- Ajuste de inglete a izquierda/derecha: 0–90°
- A 45°:
- redondo: 130 mm
- plano: 245 x 30 mm
o bien 180 x 70 mm
- Velocidad de avance de la hoja de sierra, regulable sin escalonamientos: 0–10 m/min
- Velocidad de corte de la hoja de sierra: 13 / 26 m/min
- Motor de la sierra: 400 V / 1,7 / 2,6 kW
- Motor hidráulico: 400 V / 0,75 kW
- Mordaza hidráulica para material con presión de apriete regulable sin escalonamientos
- Volante manual para ajuste fino
- Tope de retención ajustable
Iedpoy At D Iofx Al Nstf
- Dispositivo de refrigeración
- Mesa de rodillos de salida con tope: 5000 mm
- Mesa de rodillos de entrada: 4000 mm
- Dimensiones aprox.: An 800 x Al 1770 x Pr 1020 mm
- Peso aprox.: 950 kg
Mali oglas
Wijchen
922 km
Kapna krožna žaga Wadkin BRA 350
WadkinBRA 350
Pokliči
Stanje: rabljeno, skupna širina: 1.150 mm, skupna dolžina: 1.200 mm, skupna višina: 1.400 mm, Teža: 200 kg
- Dokumentacija na voljo: Ne
- CE certifikat: Ne
- Serijska številka: 827077
- Glavna moč motorja [kW]: 4.0
- Maks. premer žaginega lista [mm]: 340
- Napetost [V]: 400
- Varovalka [A]: 16
- Transportne mere: 1200mm x 1150mm x 1400mm (D x Š x V)
- Transportna teža [kg]: 200kg
- Število transportnih paketov [kos]: 1
Finančne informacije
DDV: Naveden cena je brez DDV
DDV/obračun razlike v ceni: DDV je odbiten za podjetja
Dostava in odkup možna kadarkoli za vso industrijsko opremo
Yorick Diebels
Iodpfx Aley Dtyxe Njtf
Mali oglas
Geiselwind
525 km
Krožna žaga za predhodno rezanje plošč
Haas OberkichVKS
Pokliči
Leto izdelave: 1995, stanje: zelo dobro (rabljeno), Very well-maintained pre-cut circular saw for side timber.
Equipped with hydraulic unit and accumulator, double hydraulic clamping. Attachment kit with measuring roller for splitting wedge. Electrical control cabinet with control system. Operator panel with digital size input and operation. Photos show the original condition.
Itodpfoh Eyqvjx Al Nof
Mali oglas
Günzburg
439 km
Krožna žaga - avtomatska
MEPTIGER 350 CNC FE
Pokliči
Stanje: rabljeno, Leto izdelave: 2001, Premer žaginega lista 350 mm
Itjdpfx Aloyvvpmj Nsf
Odpiranje primeža 190 mm
Število vrtljajev 15 / 30 / 45 / 90 min⁻¹
Pogonska moč 1,8 / 2,6 kW
Mali oglas
Avstrija
237 km
Hladna krožna žaga
HESSE by ISITANVX 350
Pokliči
Stanje: novo, Leto izdelave: 2025, Condition: new
Year of manufacture: 2025
Stock number: 060103
Delivery time: immediate, subject to prior sale
Country of origin: Turkey
Price: €7,500
Leasing rate: €121.59
In stock: 1
Special price: €6,300
Saw blade diameter: 350 mm
Saw blade dimensions: 350x32x63 mm
Saw blade speed: 45 / 80 rpm
Mitre angle left: 45°
Mitre angle right: 45°
Cutting capacity 0° round / square: 115 mm
Ijdpfjwmf Uasx Al Notf
Cutting capacity 45° right round / square: 110 mm
Cutting capacity 45° left round / square: 110 mm
Motor: 1.8 / 2.2 kW
Width: 1,100 mm
Depth: 1,000 mm
Height: 1,400 mm
Weight: 300 kg
Semi-automatic circular saw
High production performance, ideal for individual parts and small batches
Heavy-duty gearbox
Cast iron housing
Foot switch
Hydropneumatic saw head feed for consistent lowering and optimal cutting guidance
Pneumatic vice
2 cutting speeds
Adjustable saw head stroke to suit the dimensions of the material to be cut
Piece counter
Mitre 45° right to 45° left
Saw blade not included
OPTION:
Saw blade Dm. 350 mm €180.00
Mali oglas
Rangsdorf
692 km
Krožna žaga za lahke kovine in aluminij
Pressta EiseleProfilma 540
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1587 / 1588, premer žaginega lista: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes:
Saw unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with infinitely variable speed control.
Punching unit: Features a hydraulic punching unit on the discharge side with a punching force of 250 kN. The punching direction is vertical from above, and up to 8 profile punching tool cassettes can be used simultaneously.
Material feed: The feed is managed via a ball screw and a servomotor, with a maximum feed length of 400 mm per individual stroke.
Control: Modern variants often utilize a Siemens S7 control system with a touch display for intuitive operation and precise programming.
The machine is built for continuous industrial use and has the following physical characteristics:
Weight: approx. 1,000 kg to 1,500 kg (depending on configuration).
Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH).
Itedpfeyyz Txox Al Njf
Hydraulic unit: approx. 900 x 600 x 800 mm.
2 machines in stock.
-----
Attractive offer – flexible & worry-free
We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you.
On request, we also handle complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about.
📞 Please feel free to contact us for further information or a non-binding quotation.
We provide you with personal and expert advice.
Interim sale, changes and errors excepted!
Mali oglas
Rangsdorf
692 km
Krožna žaga za lahke kovine in aluminij
Pressta EiseleProfilma 502 ST-V
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1589 / 1590, premer žaginega lista: 500 mm, Fully Automatic Sawing and Punching System for Aluminium and Plastic Profiles
The Profilma 502 ST - V combines precise sawing and punching in a continuous, automated work process. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex machining operations, and processing of bundled materials.
Control is handled via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnosis. An IXON router provides secure remote access via VPN. Up to 10 punching dimensions can be programmed per order.
Sawing Range & Feed:
500–550 mm saw blades
Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm
Infinitely variable speed regulation
Saw cut from below, motorized feed
Material feed: 3–800 mm, reversible up to 4,000 mm
Ballscrew with servo drive and round-shaft guide
Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)*
Punching Unit:
Vertical hydraulic punching unit (outfeed side) with automatic oil cooling
Punching force: 300 kN
Stroke: 20 mm
Double-stroke cycle time: 2–3 seconds
Isdpfsyyz Ebox Al Njtf
Punch scrap ejection into frame
Conveyor belt 250 × 800 mm for parts removal
Equipment:
2 pneumatic clamping cylinders (vertical, reduced pressure)
3 chip extraction ports, Ø 100 mm, volt-free contact for extraction control
Minimum quantity lubrication system with 2x 3-liter tank and fill level display
Noise reduction package: hood and internal saw blade guard insulated
Roller conveyor (740 mm) with operator protection on infeed side
Sturdy stationary machine frame, working height: 960 mm
Manually operated safety hood
Saw blade housing located below table surface
Max. Cutting Range:
Profile height: up to 65 mm
Profile width: up to 170 mm
Technical Data:
Dimensions (W × D × H): approx. 311 × 153 × 197 cm
2 machines available
-----
Attractive Offer – Flexible & Worry-Free
We offer not only a high-quality product but also tailor-made financing options that suit your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution.
On request, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing.
📞 Contact us for more information or a non-binding quote.
Our advice is personal and professional.
Subject to prior sale, changes and errors excepted!
Mali oglas
Rangsdorf
692 km
Krožna žaga za lahke kovine in aluminij
Pressta EiseleProfilma 502 ST-HV
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles
The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers.
Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed.
Sawing range & feed:
500–550 mm saw blades
Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm
Continuously variable speed control
Up-cut sawing, motorized feed
Material feed: 3–800 mm, reversing up to 4,000 mm
Ball screw spindle with servo drive and round shaft guide
Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)*
Punching unit:
Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler
Punching force: 2 × 150 kN
Stroke: ≤ 20 mm
Vertical stroke infinitely adjustable (also suitable for embossing)
Horizontal punching cylinder can be switched off separately
Double-stroke cycle time: 2x 2–3 seconds
Punch waste is discharged laterally from the machine frame
Conveyor belt 250 × 800 mm for parts removal
Equipment:
Itsdpfx Asyyzxhol Nof
2 pneumatic clamping cylinders (vertical, pressure-reduced)
3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control
Minimum quantity spray unit with 2x 3-litre tanks and level indicators
Noise protection package: hood and saw blade guard with internal insulation
Roller conveyor (740 mm) with reach-in protection on infeed side
Sturdy stationary frame, working height: 960 mm
Manually opening safety hood
Saw blade housing below the tabletop
Max. cutting range:
Profile height: up to 65 mm
Profile width: up to 135 mm
Technical data:
Dimensions (W × D × H): approx. 311 × 153 × 197 cm
A total of 2 units available.
-----
Attractive offer – flexible & worry-free
We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution.
On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing.
📞 Please contact us for further information or a non-binding offer.
We provide personal and competent advice.
Subject to prior sale, changes and errors excepted!
Mali oglas
Bopfingen
459 km
Aluminijasta krožna žaga
Plantec TMA 60
Pokliči
Stanje: novo, Leto izdelave: 2026, Nastavitev kota rezanja horizontalno 15°- 90°15° brezstopenjsko, moč motorja žage 5,50 kW (400 voltov), premer žaginega lista 600 mm, delovno območje zadnji prislon 180 mm, delovna višina nastavljiva prek nog 940 do 1000 mm, 2 x odsesovalna nastavka (zgoraj v pokrovu in spodaj), neto teža 600 kg, dimenzije ŠxDxV 135x140x150 cm, RAL 9007 sivo aluminijasta, obračalna plošča iz brušenega nikljevega jekla, glava žage z vodili z krožnimi kroglicami za visoko natančnost, dolgo življenjsko dobo in visoko togost. Obratovalni material se lahko pri odprtem pokrovu prednapne z nizkim tlakom. Hidropnevmatski pomik lista, odvajanje ostružkov v smeri odsesovalnega pokrova.
Veselimo se vašega sporočila!
Plantec Maschinen GmbH
Itsdpfofv T Anjx Al Nef
Mali oglas
Bopfingen
459 km
Polavtomatska krožna žaga za aluminij
Plantec UK 600 HA 90 GRAD
Pokliči
Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic
The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine!
The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood.
Equipment:
- Large worktable, powerful drive motor
- Two-button control for initiating the cutting process (optional single-button control available)
- Clearly arranged control panel
- Two vertical and two horizontal pneumatic clamping cylinders
- Hydropneumatic saw blade lift with oil level indicator
- Fixed material support jaw can be moved backwards to increase cutting capacity
- Large safety hood fully covers the working area
- Minimum quantity lubrication system with 2-liter reservoir
Iodpjpa Nxdefx Al Nstf
- Adjustable blade/feed rate
- Air gun for cleaning the machine
- Saw blade diameter: 600 mm
Operation Sequence:
1. Set the cutting angle
2. Insert the material
3. Adjust the lifting speed
4. Bring the clamping cylinders up to 20 mm near the material
5. Clamp the material
6. Press the start button; the machine is ready for operation
7. Press and hold both SAW buttons; the material will be cut
8. At the end of the cycle, release both SAW buttons and press the STOP button
9. Open the clamp and remove or advance the material
Technical data such as cutting range, output, etc. (see data sheet in email attachment).
We look forward to your inquiry!
Plantec Maschinen GmbH
Mali oglas
Bopfingen
459 km
Polavtomatska krožna žaga za aluminij
Plantec UK 650 HA
Pokliči
Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic
The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood.
Equipment:
- Double miter 20° – 90° – 20°, large support table
- High-performance main drive motor
- Two-button control for initiating the sawing cycle (optional one-button control available)
- Clearly arranged control panel
- Adjustable blade/feed rate
- Two vertical and two horizontal pneumatic clamping cylinders
- Hydropneumatic saw blade lifting with oil level indicator
- Fixed material fence can be repositioned to the rear to increase cutting capacity
- Large safety hood covering the entire work area
- Minimum quantity lubrication system with 2-liter reservoir
- Air gun for cleaning the machine
- Saw blade ø 650 mm
Operating Procedure:
1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed
4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material
You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter.
Ijdpeidun Dofx Al Njtf
We look forward to your inquiry!
Plantec Maschinen GmbH
Mali oglas
Bopfingen
459 km
Ročna krožna žaga za aluminij
Plantec UK 352 P
Pokliči
Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 352 P, manual
The semi-automatic circular saw UK 352 P is an "upcut" machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P features a continuously adjustable mitre range—up to 45° to the left and up to 0° to the right. The saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical clamping cylinders. The standard scope of delivery includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. The machine is equipped with connections for a chip extraction system.
Features:
- Manual guidance of the saw blade
- Double mitre 30° – 90° – 0°, large support plate
- High-performance drive motor
- Clearly structured control panel
- Two vertical pneumatic clamping cylinders
- Fixed material stop, can be moved back to increase cutting capacity
- Large protective cover, fully shields the working area
- Minimum quantity lubrication system
- Air blow gun for cleaning the machine
- Saw blade Ø 350 mm
Iodpfx Aoidunvjl Notf
Work Process:
1) Set the cutting angle
2) Insert the material
3) Position the clamping cylinders up to 20 mm from the material
4) Pneumatically clamp the material
5) Press the start button to activate the saw blade
6) The cutting operation must be carried out manually using the hand lever
7) After completing the cut, switch off the machine!
You are welcome to inspect the desired machine in our production/demo hall at any time. Please feel free to contact us regarding this.
We look forward to your inquiry!
Plantec Maschinen GmbH
Mali oglas
Bopfingen
459 km
Polavtomatska krožna žaga za aluminij
Plantec UK 352 HA
Pokliči
Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard.
Equipment
Itedpfxjgwt Rre Al Njf
• Precision under-table circular saw
• Miter adjustment: left 45º / 90º / right -45º
• Includes 2 pneumatic vices (vertical)
• Infinitely adjustable saw blade feed
• Two-hand safety control
• Adjustable material stop (rear)
• Chip extraction device
• Mist lubrication system for air-oil cooling
• Air gun with spiral hose
• Includes maintenance unit with pressure reducer
• Ergonomically arranged control panel
• Max. cutting height: 125 mm
• Saw blade: 350 mm
• Saw blade not included in the scope of delivery!
You are welcome to inspect the desired machine in our production/demonstration hall at any time.
Please do not hesitate to contact us.
We look forward to your inquiry!
Plantec Maschinen GmbH
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Bopfingen
459 km
Ročna krožna žaga za aluminij
Plantec UK 352 M
Pokliči
Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 352 M, manual
The manual circular saw UK 352 M is an "upcut" machine, primarily used for single cuts on aluminum and copper profiles as well as hard plastics (solid materials only to a certain extent). The machine stands out thanks to its easy operation, quick and convenient material changeovers, and simple miter angle adjustment. The UK 352 M offers a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is manual via a hand lever, and material clamping is also done manually.
Equipment
- Double miter 45° – 90° – 0°
- Large support table
- Powerful drive motor
- Clearly arranged control panel
- One manual clamping cylinder
- Fixed material stop jaw can be shifted backwards to increase cutting capacity
- Large protective hood covering the entire working area
- Saw blade diameter: 350 mm
Working process
1) Set the cutting angle
2) Insert the material
3) Manually clamp the material
4) Press the start button to power up the saw blade
5) Perform the cut manually using the hand lever
6) After finishing the cut, switch off the machine!
Isdpfx Aljidunnj Nstf
You are always welcome to view the desired machine in our production or demonstration hall. Please feel free to contact us.
We look forward to hearing from you!
Plantec Maschinen GmbH
Mali oglas
Bopfingen
459 km
Polavtomatska krožna žaga za aluminij
Plantec UK 400 HA
Pokliči
Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood!
Equipment
• Precision under-table circular saw
• Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º
• including 2 pneumatic clamps (vertical)
• Infinitely variable saw blade feed
• Two-hand safety operation
• Adjustable rear material stop
• Chip extraction device for chip extraction system
• Mist spraying unit for air-oil cooling
• Air gun with spiral hose
• Including maintenance unit with pressure regulator
• Ergonomically arranged control panel
• Max. cutting height: 130 mm
• Saw blade: 400 mm
• Saw blade not included!
You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us.
Itsdpfegwt Rnjx Al Nsf
We look forward to your inquiry!
Plantec Maschinen GmbH
Mali oglas
Bopfingen
459 km
Polavtomatska krožna žaga za aluminij
Plantec UK 352 HA
Pokliči
Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system.
Features
• Precision under-table circular saw
• Mitre adjustment: left 45°, 90°, right -45°
• Includes 2 pneumatic vertical clamps
• Infinitely adjustable saw blade feed
• Two-hand safety control system
• Adjustable rear material stop
• Extraction system for chip extraction unit
• Mist spray system for air-oil cooling
• Air gun with spiral hose
• Maintenance unit with pressure regulator included
• Ergonomically arranged control panel
• Max. cutting height 125 mm
Iodpfx Aljgwt Rys Njtf
• Saw blade Ø 350 mm
• Saw blade not included!
We look forward to hearing from you!
Plantec Maschinen GmbH
Mali oglas
Bopfingen
459 km
Polavtomatska krožna žaga za aluminij
Plantec UK 600 HA
Pokliči
Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting.
Features:
• Precision underfloor circular saw
• Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º
• Includes 2 pneumatic clamps (vertical)
• Continuously adjustable saw blade feed
• Two-hand safety control
• Adjustable material stop (rear)
Isdegcbwgepfx Al Nstf
• Extraction system—chip extraction connection
• Mist spray device for air-oil cooling
• Air gun with coiled hose
• Includes maintenance unit with pressure regulator
• Ergonomically arranged control panel
• Maximum cutting height 230 mm
• Saw blade 600 mm
• Saw blade not included!
You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment.
We look forward to your inquiry!
Plantec Maschinen GmbH
Olajšamo vam iskanje: "krožna žaga kaltenbach kmr 100 ap hm"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.





























































































































































































































































































































