Cms Cnc Machine Vmc - 115 nakup rabljenega (73.043)

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 Dwodpfxsxy Tmne Aflea 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: rabljeno, Leto izdelave: 2016, Delovno polje: X=3300 mm Y=1280 mm Z=150 mm Višina prehoda Upravljalni terminal: 24" barvni LED zaslon Ročni terminal za upravljanje hitrosti osi Programska oprema: "Woodflash" Vakuumska črpalka 90 m³/h/50 Hz oziroma 108 m³/h/60 Hz Rezkalno vreteno 12 kW HSK F63 (12.000 vrt./min) 12-pozicijski linearni menjalec orodja na levi strani stroja + pick-up prostor Vrtalna glava DH 16 4H 2S: 12 navpičnih vreten 4 vodoravna vretena 2 utorni žagi Lokacija skladišča: Nattheim Dwjdexy Tlwopfx Aflea

Stanje: rabljeno, Leto izdelave: 2011, OSI DELOVNI PODROČJE OSNOVNE OSINe: X-Y-Z osi * mm 3050-1300-180Dolžina obdelovanca pri nihajnem obdelovanju mm 1390Hod osi X-Y-Z mm 3460-1735-250maks. hitrost premikanja osi X-Y m/min 60DELOVNA MIZAŠtevilo opornih površin za obdelovance in vakuumske prisesalne glave 6 / 2 Standard TipStandardKončne ustavne točke / Pozicija 1 / zadajVakuumska črpalka m3/h 90/108SVRTILNA ENOTAVrtikalne vretena Std./število/hitrost 1/min 12 (8X-5Y) / 4000Horizontalne vretena Std./število/hitrost 1/min 6 (4X-2Y) / 4000Integrirana utor/žagalna enota v X Ømm/1/min 120 / 6000Moč motorja kW (KM) 2,2(3)ELEKTRIČNO VRETENOMožnost motorja Std. / Opt. (S6) kW (KM) 7,5(10) / 11(15)maks. hitrost 1/min 24000Menjava orodja, ki se premika na nosilcu enote v X 4 mesta, pnevmatskaINSTALACIJANamestitev KVA 23÷28,5Potreba po stisnjenem zraku Nl/min 450Potreba po odsesalnem zraku m3/h 1900+1900 (3400)Potrebna hitrost odsesalnega zraka m/sec 30Premer odsesalne odprtine mm 150+150 (200)Teža stroja Kg 3000 * X razdalja med ustavnimi točkami - Y sredina frezerja kot referenčna točka; Z prehod obdelovancaSPLOŠNE LASTNOSTI CNC-nadzorovano vrtalno in frezersko središče, s C-konstrukcijo in delovno mizo z nastavljivimi opornimi površinami in vakuumske prisesalne glave, za izvajanje:- Vertikalnih vrtin na površini plošče- Horizontalnih vrtin na vseh štirih straneh obdelovanca- Utorov s krožnim frezerjem v smeri "X"- Splošna frezerska delaSamonosna konstrukcija in delovna mizaKonstrukcija iz jeklene varjene konstrukcije z omarico za nadzorno elektroniko, integrirano v okvir stroja. Na voljo v dveh različnih dolžinah in s standardnimi opornimi površinami ali TV opornimi površinami.Premikajoči se nosilec enoteKonstrukcija v obliki okvirja iz hladno valjane jeklene pločevine z notranjimi rebrastimi ojačitvami, zaščitne naprave z odbijači.Delovna enota, sestavljena iz vrtalne glave z vertikalnimi vreteni, horizontalnimi vreteni, integrirane utorne/žagalne enote in električnega vretena SCME z sistemom za hitro menjavo orodij tipa HSK 63 F.Hodi mostu in nosilca enotePremik v osi X, Y in Z poteka po linearnih prizmatičnih utornih tirnicah z uporabo prednapetih tirnic. Prenos gibanja osi X (premikajoči se stojalo) poteka prek prednapetega, povratnega zobniškega pogona s poševnim gibom. Premik nosilca enote v smeri Y in Z poteka prek prednapetih tirnic. Pozicioniranje delovnih enot in nadzor funkcij stroja poteka prek "brezščetkavih" trifaznih servomotorjev in digitalnih pogonov.CNC NADZORNadzorna enota je sestavljena iz numeričnega nadzora za frezerske in vrtalne stroje ter predhodno nameščenega osebnega računalnika z grafičnim uporabniškim vmesnikom "XILOG PLUS".Računalnik - Operacijski sistem Office Windows XP- LCD-barvni zaslon 17- Qwerty tipkovnica- vrtljivo upravljalno plošče- vmesnik stroja Programska oprema Xilog PlusLastnosti Xilog PlusProgramiranje- parametrično, grafično in ISO programiranje- uvoz datotek DXF in ASCII- interpolacija črt ali krožnic v treh osi, linearna v prostoru, spiralna v izbrani ravnini- podprto programiranje z grafično pomočjo in sintaktično pomočjo za vrtanje in frezerske operacije- samodejna optimizacija vrtalnih operacij in izmenjava orodij- cikel- možnost premika referenčne točke plošče za izvajanje vrtin na poševnih ali ukrivljenih straneh plošče- popolna združljivost s CAD/CAM programi Routocam (SCM) - AlphaCamIntegrirane dodatne funkcije- kalkulator za neposreden prenos izračunanih podatkov- Dwjdpfx Aoyymz Uoflsa

Stanje: rabljeno, številka stroja/vozila: 008497, Delovno območje osi X: 3140 mm Delovno območje osi Y: 1560 mm Delovna površina: miza za nastavitev Število nadzorovanih osi: 3 osi Dsdpfx Afezruy Hslowa Število mest za orodja: 16

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 24.000 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 466, Wenzler VKM 1-1 CNC-vertikalno obdelovalni center z 5 osmi Opis Tip: CNC-vertikalni obdelovalni center z 5 osmi Proizvajalec: Wenzler Dwjdpfxszrv Dge Afloa Model: VKM 1-1 Letnik: 2016 Serijska številka: 466 Stanje: Rabljeno Število: 1 HS koda: 84571090 Opis artikla Ponudba vključuje: En CNC-vertikalni obdelovalni center z 5 osmi in pripadajočo opremo Tehnični podatki Zgodovina stroja in stanje Stroj je bil od leta 2016 do 2022 uporabljen kot razstavni eksponat. Od leta 2022 je bil uporabljen pri podjetju HAL Automotive Plauen GmbH v proizvodnji za obdelavo nosilcev osi. Pred uporabo v proizvodnji je bil stroj popolnoma obnovljen in nadgrajen. Decembra 2024 je bila kupljena nova vretenčna glava. Vretenčna glava ima približno 500 delovnih ur. Delovne ure: približno 24.000 ur Delovni obseg Os X: 1.500 mm Os Y: 1.250 mm Os Z: 880 mm Hitrost podajanja / hitri pomik Os X: 100 m/min Os Y: 100 m/min Os Z: 100 m/min Pospešek osi Os X: 7 m/s² Os Y: 7 m/s² Os Z: 10 m/s² Sunek: 150 m/s³ Nosilnost mize Maksimalna teža obdelovanca: 400 kg Vreteno Nosilec orodja: HSK 100 Maksimalna hitrost vrtenja vretena: 10.000 vrt/min Moč, S6 / 40 % delovnega cikla: 40 kW Maksimalni navor: 175 Nm Revija za orodja Število mest: 36 Maksimalna dolžina orodja: 520 mm Maksimalni premer orodja pri prostem sosednjem mestu: 205 mm Maksimalna teža orodja: 20 kg Maksimalna skupna obremenitev revije: 200 kg Čas menjave orodja: 3 sekunde Vključena oprema Odstranjevalec sekancev Hladilna enota Hladilna enota Proizvajalec: Lahntechnik GmbH Model: KESY 280-01 Serijska številka: 2017-05981 Letnik: 2017 Nazivna moč: 13,6 kW Nazivna napetost: 400 V / 3~ / PE / 50 Hz Upravljalna napetost: 24 V DC Zaščitni razred: IP54 Hladilno sredstvo: R410A – 10,03 t CO₂-enakovrednosti Maksimalni delovni tlak: 30 bar HD / 19 bar ND Prazna teža: 400 kg Država izvora: Nemčija Ni vključeno v ponudbo Stroj oz. premoženje ne vključuje orodij, naprav ali robotskih prijemal, ki so specifični za posamezen izdelek. Delovno stanje in pregled Stroj je bil oktobra 2025 odstranjen iz proizvodnje zaradi zaprtja tovarne. Stroj je še vedno priključen na napajanje in ga je mogoče v tem stanju pregledati. Preizkusni tek ni mogoč, saj ni na voljo operaterja stroja. Prosimo, oglejte si videoposnetke, ki jih je stroj posnel decembra 2025. Transport in natovarjanje Posebne varnostne naprave za transport niso potrebne. Za nakladanje in razkladanje je potrebna posebna oprema za dvigovanje in transport podjetja Wenzler. Kupec mora to opremo najeti neposredno pri podjetju Wenzler / Heller Group. Po dvigovanju in razkladanju je kupec odgovoren za vračilo opreme podjetju Wenzler.

Stanje: rabljeno, Leto izdelave: 1995, CNC obdelovalni stroj za freziranje, univerzalni Proizvajalec: HERMLE Tip: UWF 902 S Letnik izdelave: 1995 Delovnih ur: 65.071 Nadzorni sistem: HEIDENHAIN TNC 426 Delovni obseg X/Y/Z: 600 x 450 x 500 mm Območje vrtljajev: 20 – 6.300 vrt/min Oprema za orodje: SK 40 3D tipalo M & H (za nastavitev obdelovanca) Vertikalno-horizontalna frezalna glava Vreteno za vrtanje Dodsv Rxa Sepfx Aflowa Naprava za hlajenje Nagibna miza: 900 x 458 Teža: 4.000 kg Dimenzije stroja: D x Š x V, približno: 3.900 x 2.000 x 2.000 mm ä3826

Stanje: rabljeno, Leto izdelave: 1995, CNC rezkalni stroj, univerzalni model Proizvajalec: HERMLE Tip: UWF 902 H Letnik: 1995 Dedpfx Afov Rpr Sslewa Število obratovalnih ur: 46.680 Krmilni sistem: HEIDENHAIN TNC 426 Hodi osi X/Y/Z: 600 x 450 x 500 mm Nagibna miza: 900 x 458 mm Renishaw 3D tipalo Območje vrtljajev: 20 do 6.300 vrt/min. Vpenjalna glava: SK 40 Rezervoar za hladilno tekočino Moč pogona: 8,6 kW Približna teža: 4.500 kg Dimenzije stroja (D x Š x V): približno 2.950 x 2.200 x 2.300 mm 3826ä

Stanje: dober (rabljeno), Leto izdelave: 2016, CNC-portalna plazemska rezalna naprava Proizvajalec: Sato Tip: Satronik D5765 Letnik izdelave: 2016 CNC-nadzor: Satocontrol CNC 3010 Širina tirnice: 5.750 mm 6 x avtogeni gorilniki brez vodila brez mize brez filtra Dwodpfogqkc Nox Aflsa 3826

Stanje: rabljeno, Leto izdelave: 2003, CNC obdelovalni center, univerzalni Dwsdpewwt Nmsfx Aflea Proizvajalec: AXA Tip: VPC 40 U Letnik: 2003 CNC-krmilnik: Heidenhain TNC 430 Hodi: X/Y/Z = 2.300 x 1.200 x 600 mm Dimenzije NC-okrogle mize: 1.100 x 1.100 mm Dimenzije fiksne mize: 1.100 x 1.100 mm Vpenjalni sistem orodij: SK40 Revija za orodja: 60 mest Število vrtljajev: 10.000 vrt/min Teža: približno 20 ton. 3826ä

Stanje: rabljeno, Leto izdelave: 2012, CNC obdelovalni center Proizvajalec: Unverzagt Tip: UVA 550 Plus Letnik: 2012 Nadzorni sistem: Siemens 828D Občutne delovne ure: približno 3.000 Hodi osi: X/Y/Z: 600 x 400 x 500 mm Število orodnih mest: 20 Tip orodnega vpenjala: SK40 Območje vrtljajev vretena: 10.000 vrt/min Funkcijski gumb Hexagon Transportni sistem za odrezke Hladilnik vretena Dedpfxjwv Tm Nj Aflswa IKZ (notranji hladilni sistem) 3826ä

Stanje: rabljeno, CNC obdelovalni center SCM Routech R 3000 za obdelavo ploščatih materialov z avtomatskim sistemom za dovod materiala (vakuumska naprava za razporeditev) in sistemom za odvajanje obdelanih delov. Djdpfx Afozryyljljwa Tehnični podatki: - Delovna površina: 2.600 x 1.250 mm - Os X: 2.700 mm - Os Y: 1.600 mm - Os Z: 250 mm - Motor vretena: 7,5 kW - Hitrost podajanja: maks. 38 m/min - Video: Na zahtevo.

Stanje: rabljeno, Zaloga stebelnih rezkarjev za CNC stroje Dodjzrydwepfx Aflswa

Stanje: rabljeno, Novi, nerabljeni, nabrušeni in rabljeni vretenčni rezalniki in svedri za CNC stroje, kot je prikazano na slikah. Tehnični podatki: - Dolžina: Različne - Premer: Različne Dedpfx Afszrybpoljwa - Vreteno: Različne - Teža: 12 kg - Uporaba: Obraba lesa

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Djdpfovwbp Aex Afljwa

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da Dodjvvi Htspfx Aflowa CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Število vakuumskih črpalk: 1 Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Leto izdelave: 2004, Lokacija skladišča: Nattheim Dwsdpfsvvi Hysx Aflsa

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Dwsdpfxswmm Nro Aflsa

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim Djdpfjvvi Nbex Aflowa

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The machine base is a monolithic design made from thick-walled steel. It is reinforced throughout the entire machine bed with welded triangular plates, which ensures exceptional rigidity. The use of a large-base triangular form in load-bearing components is key to ensuring lasting precision and stability. The machine layout allows an optimal workflow for the operator while requiring minimal space. This robust base offers the processing unit a balanced and secure foundation with excellent load distribution. The mobile gantry unit carrier is built from a solid monoblock. It moves in the X direction on prismatic, ground guides with recirculating ball carriages. Mounted on the mobile unit carrier, the processing unit also travels on prismatic, ground guides and recirculating ball carriages. Axis Movement: The drive system in the Y and Z axes utilizes precision-ground recirculating ball screws of the highest accuracy grade. The drive in the X-axis is by a backlash-free, preloaded precision rack and pinion system. This enables balanced load distribution during positioning. Such characteristics are essential for smooth operation, even in complex machining scenarios. Axis movement is powered by brushless AC servo motors, which provide excellent positioning speeds thanks to very short ramp times. The feedback systems are fully integrated into these motors, making the drive system entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. negative pressure (connection): 0.9 bar Control System / Control Cabinet · Office PC or industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote controller with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Dsdpfovvi Nzjx Aflswa Universal is equipped with a powerful NC control. The integrated office PC provides the NC control with a unique level of familiarity: the software operates on Windows XP and allows fast and easy programming, which is also easy for inexperienced users to learn. The system is open, supporting connections for CD-ROM drive, sound card, barcode reader, modem, printer, scanning systems, etc. Installation of all network systems and any commonly available CAD programs is also possible. To save space, the control cabinet is located beneath the machine table, and the operator works from a separate, mobile control terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software Features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, spiral in the selected plane - Supported programming - Calculator for direct data transfer - Graphics and syntax help for drilling and milling operations - Parametric programming to perform identical panel processing on different p...

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. Dwodpsvvi N Iefx Aflsa - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 Dwsdsvvi Rfjpfx Afloa · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Stanje: rabljeno, Leto izdelave: 1999, Lokacija skladišča: Nattheim Dodpfx Afjvvi Rxelewa

Stanje: rabljeno, Leto izdelave: 1995, Lokacija skladišča: Nattheim Dsdjwkirqjpfx Aflewa

Stanje: rabljeno, Leto izdelave: 2009, automatic central lubrication milling unit 7833, 2-stage, 11 kW power, 1,000 - 24,000 rpm; 1 double drilling spindle in X direction; 1 integrated saw unit for sawing/grooving in X direction, traversing; tool changer 7892, 16-position linear pick-up changer, permanently installed on the right side of the machine; laser pointer set: 2 laser pointers for positioning the vacuum cups or referencing the workpiece contour; automatic console and vacuum cup positioning; 6 consoles incl. 3 vacuum cup mounts per console, incl. 1 vacuum cup 80x80 mm per mount; incl. 4 loading aids; additional processing zones at the front for 6 consoles; base unit pneumatic system for frame clamping system 7974 (6 consoles); 2D barcode scanner; video camera in the machining head; vacuum pump 140 m³/h; Vario tool change unit package consisting of: vector axis 7899 (C-axis) fully interpolating, 0-360° infinitely rotatable, incl. pneumatic tool changer 7890, single-position magazine, pick-up system, fixed installation in front of the machine frame on the left; tool changer 7894, 6-position pick-up magazine especially for Vario tool change tool holders, fixed installation in the left side of the machine frame, can be equipped with collet chucks Vario Grip KSJ F 40, 3 pcs. tool holders Vario Grip KSJ F 40 (for collets 2-20 mm ER32), 1 pc. saw blade adapter, 3 pcs. collets per customer selection, 1 pc. carbide circular saw blade max. 220 mm diameter. Dwedpfx Afevvi Spjloa Location: Nattheim

Stanje: rabljeno, Leto izdelave: 2005, Delovno območje: X=2970 mm / Y=1725 mm. Hitrosti pomika osi: X=60, Y=45, Z=25 m/min. Teža: 3200 kg. Lokacija skladišča: Nattheim. Dwedpew Dcccofx Aflja