CNC obdelovalni center

Unverzagt UVA 550 Plus

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, which includes: - Single-lane elevator - Three-lane elevator - 24-head weigher with 1L hopper - 32-head weigher with 1L hopper - KEN Hygiene System EWD 50 (Weigher auxiliary equipment washing station) Rjdpfxepxm Ugo Afaow - Platform with stairs - Distribution tools – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) The set was only used for equipment testing, with approx. 100 operating hours. The line was dismantled by authorized Cabinplant and Multivac service teams.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 28.742 h, Funkcionalnost: popolnoma funkcionalen, prehod palice: 65 mm, FANUC Serija 31i-Model A Redpfx Asydmbuofaew 3 revolverji Transportni trak za dele Magazin Dodatne informacije na zahtevo

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Rsdpfx Aet Hw H Eofaew Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!

Stanje: rabljeno, Leto izdelave: 2011, Premer struženja: 160 mm Dolžina struženja: 550 mm Krmiljenje Siemens Teža stroja cca 9.000 kg Maks. dolžina struženja: 550 mm Maks. preboj palice: 65 mm Maks. premer struženja: 160 mm Z MBL 3 revolverski glavi z hladilnim stolpom Rodpfsyuzfpsx Afasw Dodatni hladilni rezervoar s filtrom in črpalkami. Črpalka: 8 bar – 20 litrov + 20 bar – 30 l/min

Stanje: rabljeno, Leto izdelave: 2000, Premer reza 280 mm Dolžina tračnega lista 4930 mm Območje reza pri 90 stopinjah: kvadrat 280 x 280 mm Območje reza pri 45 stopinjah: okroglo 280 mm Območje reza pri 45 stopinjah: kvadrat 280 x 280 mm Območje reza pri 60 stopinjah: okroglo 220 mm Območje reza pri 60 stopinjah: kvadrat 200 x 200 mm Rjdpew En Efofx Afasw Podajalna dolžina 600 mm Večkratna podajalna dolžina 5400 mm Hitrost reza 17 - 90 m/min Dolžina ostanka min./maks. min. 30 mm Minimalni premer reza 10 mm Krmiljenje KASTO, Compact Control Skupna potrebna moč 5 kW Teža stroja cca 1,75 t Mere stroja D x Š x V 2,68 x 2,54 x 1,59 m Dodatki: hladilni sistem, valjčna proga 3300 mm dolga, 300 mm široka; valjčna proga 1350 mm dolga, 300 mm široka.

Leto izdelave: 1971, stanje: rabljeno, Technical details: Max. gear diameter: 300 mm Max. module: 5 Min. module: 0.5 Redpfx Aovc Apbsfajw Max. workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions: 1800 x 1850 x 2500 mm Control cabinet dimensions No. 1: 1930 x 400 x 1920 mm Control cabinet dimensions No. 2: 800 x 230 x 1950 mm Dimensions of exhaust system: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine For modules up to 5 and diameters of 240–300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30` Max./min. helix angle at 24 teeth: 6000 / 200 mm Max. double-sided helix angle: 45° Grinding worm speed: 1900 rpm Without dressing device Equipment: Approx. 77 various change gears, tube extensions and assorted accessories Two of these machines are available for sale. Both machines are supplied via two shared control cabinets and an exhaust system.

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Rjdpfot Hw N Tsx Afaew Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 12.244 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 275 mm, pomik po osi Z: 700 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.620 mm, skupna masa: 4.200 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SolutionLine, število mest v zalogovniku orodij: 16, število osi: 2, Ta 2-osna horizontalna stružnica SPINNER TC 600-65MC je bila izdelana leta 2015 in je opremljena s krmiljem Siemens 840D ter 16-pozicijskim revolverjem z menjalnim orodjem. Stroja ima glavno vreteno z maksimalnimi obrati do 4.000 min⁻¹ in močjo 24 kW. Omogoča nagibni premer nad ležiščem 425 mm ter maksimalni premer struženja 310 mm. Preverite možnost nakupa te horizontalne stružnice SPINNER TC 600-65MC. Za dodatne informacije o stroju nas kontaktirajte. Dodatna oprema • Popolna zaščitna oplata z rezervoarjem za hladilno tekočino • Delovna razsvetljava + pnevmatska oprema • Panoramsko okno za optimalen pogled na delovni prostor Prednosti stroja Tehnične prednosti stroja • Razdalja med osema: pribl. 600 mm • Maksimalni premer struženja: 310 mm • Navor: glavno vreteno (Fanuc, S6 40 %) 178 Nm, glavno vreteno (Siemens, S6 40 %) 301 Nm • Pomik pinole: 120 mm • Dolžina pomika: 475 mm • Hitrost vrtečih se orodij: 6.000 min⁻¹ • Pogonska moč orodij: (Fanuc, 30 min) 3,7 kW, (Siemens, 40 %) 6,0 kW Dodatne informacije Mediji Pnevmatski max. obratovalni tlak: 10 bar Normalni tlak: 6 bar Hidravlični max. obratovalni tlak: 30 bar Krmiljenje Krmilnik: standard Siemens 840D, opcijsko Fanuc 21i Obratovalna napetost: 400 V Omrežna frekvenca: 50/60 Hz Rjdpfxox D E Hno Afasw Krmilna napetost: 24 V DC Vmesniki: USB, Ethernet, SPINNER-UNIMAG podajalnik palic (električni) Tehnične specifikacije Hlajenje skozi vreteno: Ne Proti-vreteno: Ne Pogonska orodja: Da Velikost utora za orodje: VDI 30

Stanje: dober (rabljeno), Leto izdelave: 2014, Technische Daten sind auf den Fotos ersichtlich. Die per Hand gezeigten Teile sind nicht im Lieferumfang enthalten. Rsdpfxsufp Svo Afaow

Stanje: dober (rabljeno), Leto izdelave: 2014, Caracteristici tehnice ale acestui centru de prelucrare cu 5 axe Producător: DMG Model: DMU 50 An fabricație: 2014 Control CNC 3D: HEIDENHAIN ITNC530 SMART NC Tip ecran: DMG ERGOLINE®️ CONTROL 19” Masă rotativă NC basculantă, simultană: INCLUSĂ Suprafață masă: 630×500 mm Greutate maximă admisă pe masă: 250 kg / palet Masă rotativă (Axa C): 0,001º (±360º) Axe Deplasare longitudinală (Axa X): 500 mm Deplasare transversală (Axa Y): 450 mm Deplasare verticală (Axa Z): 400 mm Avans rapid (axe X/Y/Z): 42.000 mm/min Avans de lucru (axe X/Y/Z): 10.000 mm/min Interval înclinare (Axa B): -5º/+110º Broșă Turație broșă: 10.000 rpm Con frână: SK40-DIN 69871 Putere motor principal: 25 kW Schimbător automat de scule (ATC) Număr locașuri ATC: 60 Lungime maximă sculă: 300 mm Echipare Transportor de șpan: INCLUS Răcire activă a dulapului electric: INCLUS Palpator de scule: INCLUS Sistem de măsurare directă: INCLUS Pistol de spălare: INCLUS Manșă portabilă de comandă: INCLUS Sistem de aspirație: INCLUS Răcire internă: INCLUS Rezervor lichid de răcire cu filtru de hârtie: INCLUS Rsdpsy Smynsfx Afaew Altele Dimensiuni utilaj (Lxlxh): 5.100×3.200×2.750 mm Putere electrică totală: 27 kVA Greutate utilaj: 4.500 kg Preț la cerere