Arthur Klink Vodoravni Stroj Za Izvlačenje, Stroj Za Izvlačenje nakup rabljenega (95.721)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Itodew Ighiepfx Akyok Table size / working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power Supply: 400 Volt / 50 Hz Additional modifications / optimizations compared to the original machine: - External stroke adjustment - New, cross-machine reproducible tool length adjustment system - Additional limit switches for end position monitoring - Machine safety door with monitoring (integrated into emergency stop circuit) - Machine enclosure below the safety door with chip guard and tool rest - Electrical sensing of the clamping jaws (tool removal control to prevent unintended retraction of the drawbridge) - Coolant swivel system with solenoid valve controlled over the swivel process (to activate coolant before broaching stroke – visual check of lubricant flow, no dry cutting!) - Electrical wiring routed in protective steel conduits - Heavy-duty control cabinet mounting for receiving machine components - Additional oil-tight drip tray on the control cabinet - 3-sided enclosed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel sheet with permanent labeling - 4 central lubrication points for trapezoidal spindle drive Remark: The machine is fully overhauled, and the machine body has been completely refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - The coolant system (pump, solenoid valve, and drain tap) including the coolant/lubricant swiveling system is new - The clamping jaws are new - The entire electrical system (control cabinet) is new - All metal sheets and covers are new - The following components have been overhauled and re-used: - Machine base - Machine stand - Machine table with table insert - Drawbridge (clamping jaws are new) - Gear wheels - Electric motor (new brake, new bearings) The machine is available in our warehouse and can be inspected under power. The attached pictures are original photos of the machine. The machine is marked with the “CE” label. This “CE” conforms to the state of 1998 (first overhaul).

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of Manufacture: 2001/2023 Weight: 580 kg Overhaul: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current “CE” marking Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Equipment: - Drive with 2 speeds - Safety door with safety interlock and chip chute - Chip chute with tool tray - Electric monitoring of clamping jaws (tool removal control to prevent unintentional return of the pull bridge) - Integrated coolant system with solenoid valve (controlled via swivel system) - Patented coolant/lubricant swivel system Isdpjw H Dgnsfx Akyjtk - Externally adjustable tool length setting system (replicable across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centring plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided closed splash guard cabin with tool tray (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, with the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals have been renewed - The coolant system (pump, check valve, and drain tap), including the coolant/lubricant swivel system, is new - The coolant supply is controlled by a solenoid valve, which can be actuated via the swivel system - The pull bridge, clamping jaws, and rack segments are new - A switchable clamping jaw monitoring system has been implemented (additional safety for operator and prevention of tool breakage) - Safety door with safety interlock, signal indicator, and door lock - Tool length setting system has been relocated outside the machine enclosure - Additional end position limit switches installed - All electrical equipment (control cabinet) is new - No PLC installed, making the machine electrically maintenance-friendly - New drive motor (SEW Germany) with brake - Machine has been newly painted with 2-component structural lacquer General Information: The dual-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed (optionally 3 m/min or 6 m/min). By design, the machine is quick and easy to set up for broaching with flat tools for keyway cutting. Thanks to the universally designed pull bridge and machine table, broaching with profile and flat broaching tools is possible without using additional pull heads.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1966, skupna masa: 7.000 kg, vhodna napetost: 380 V, dolžina bročanja: 1.500 mm, število bročirnih položajev: 3, premer obdelovanca (maks.): 575 mm, skupna višina: 5.100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700kg Machine No.: 2455 Iedpfowql Rvsx Akyotk General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching positions Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching positions: 3 Distance between broaching positions: 2 x 145mm Clamping diameter for broach pullers: 3 x Ø 85mm Clear width between columns: max. 580 mm Cutting speed: hydraulically continuously variable from 1 m/min up to max. 7 m/min Return speed: hydraulically continuously variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,500 x 2,100 x 4,600 mm (max. height 5,100 mm with tool loader raised) Power supply / Connected load: 380 Volt 50 Hz / 14 kW Accessories / Special Features: The machine is equipped with a workpiece table featuring 3 bores for 3 broaching positions. The tool clamping system is designed for mechanical spring-locking in the pull bridge and loader. The machine is fitted with an integrated coolant system. Remarks: The machine is designed for use in series production; for optimum utilization, installation in a pit (foundation) is ideally required, or alternatively, on a platform. Broach pullers and knock-out devices available on request. The machine can be inspected under power at our facility. General Information: We constantly have a large selection of around 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg in both horizontal and vertical configurations in stock. A significant number of the broaching machines in stock are available for demonstration. If required, we can also offer you used equipment such as broach pullers, knock-out devices, broaching tools, and other specific accessories. We are a contract broaching operation by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries you may have.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 480 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, dolžina bročanja: 1.000 mm, število bročirnih položajev: 1, hitrost vlečenja: 3 m/min, hitrost vzvratne vožnje: 100 mm/s, premer obdelovanca (maks.): 800 mm, skupna višina: 1.680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical data: New vertical broaching machine, make: Wiemers SR 30 (100% compatible with Rausch RS 3) Pulling force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table size / working area: 430 mm x 320 mm / 340 mm x 220 mm Table aperture: Ø 90 mm for standard broach holders “Rausch system” Workpiece diameter: unlimited (removable coolant swing system) Broaching capacity / keyway width: up to 20 mm in steel (from 16 mm broaching tool width only with stepped tool shank) Dimensions (H x W x D): 1370 mm x 680 mm x 750 mm (h = table height from floor without superstructures) Motor: 2.5 kW / 3.0 kW, 2-stage, for 2 operating speeds Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 operating speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with lock, interlock check and safety monitoring - Easily removable chip chute with tool removal guard and storage option Iedow D E Twopfx Akyetk - Externally adjustable tool length system (machine-cross reproducible) - Protective cover for stroke adjustment and electrical switch units - Oil-tight storage surface on the control cabinet - Electric detection of clamping jaws (tool removal check to prevent unintentional return of pull bridge; added safety for operator & tool) - Integrated coolant system with electrically controlled solenoid valve and drain tap - Coolant swing system with automatic coolant control via swing arm - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel operator panel with durable labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical pre-installation for external control element (16-pin connector) - Provision for automatic clamping jaw opening for profile broaching via roller lever - Machine documentation with "CE" declaration of conformity Optional accessories: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (W x D x H) 700 x 350 x 600 mm - External electrical control unit for broaching and return as well as emergency stop function Note: The machine is 100% compatible with all Rausch broaching machines of the RS 3, RS 4 and RS 6 series in the same performance class available on the market. All fixtures, tools or broach holders can be used without restriction. General The twin-spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm (from 16 mm slotting tools only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools to produce keyways. Thanks to the universally designed pull bridge and machine table, both profile and flat broaching tools can be used. Profile broaching is possible without the use of additional draw heads, using simple centering bushes. Broaching tools and holders suitable for the machine are available on request.

Stanje: rabljeno, Leto izdelave: 1986, skupna masa: 6.500 kg, moč: 42 kW (57,10 KM), vhodna napetost: 380 V, dolžina bročanja: 1.600 mm, število bročirnih položajev: 1, premer obdelovanca (maks.): 500 mm, Manufacturer: Varinelli Milano, Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500 kg Machine No.: 3269 General / Technical Data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600 mm Number of broaching stations: 1 unit Maximum clearance width between cylinders: 540 mm Cutting speed: hydraulically and infinitely variable from 1 m/min to max. 8 m/min Return speed: hydraulically and infinitely variable up to max. 18 m/min Space requirement: see machine layout diagram Power supply / connected load: 380 Volt, 50 Hz / 42 kW Isdowqmaxepfx Akystk Accessories / Special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is fitted with a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The tool feeder system is locked hydraulically-mechanically. The machine features a coolant system with an integrated chip conveyor for installation in a pit. Remarks: The machine retains its original paintwork. It is designed for use in series production of medium and large batch sizes; for optimal operation, installation on a foundation (pit) is recommended. Pull heads and ejector needles are available upon request. The machine can be inspected at our warehouse. General information: We continually stock a wide selection of approximately 80 used broaching machines with pulling forces ranging from 3,000 kg to 63,000 kg, in both horizontal and vertical configurations. Many of the broaching machines in stock are available for demonstration. If required, we can also supply various used equipment such as pull heads, ejector needles, broaching tools, and additional specific accessories. We are a contract broaching facility by trade and, with over 50 years of experience in broaching technology, can assist you with any technical queries.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 400 kg, vhodna napetost: 400 V, dolžina bročanja: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with "CE" marking Pulling force: 3,000kg Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1,000mm Maximum tool length: 1,200mm Table size / working area: 430mm x 320mm / 340mm x 220mm Table opening: Ø 90mm for standard Rausch broaching mandrels Workpiece diameter: variable (removable coolant swivel system) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with stepped tool shank) Dimensions (H x W x D): 2,250mm x 800mm x 750mm (H = including 3-side safety enclosure) Motor: 2.5kW / 3.0kW Itedpfjw Huh Nsx Akyek Power supply: 400 Volt / 50 Hz Equipment: - Geared motor drive with 2 working speeds - Safety door with safety interlock (emergency stop circuit) - Easy-to-remove chip chute with tool rest - Tool length adjustment system adjustable from outside (Rausch system) - Protective panel for stroke adjustment and electrical switch units - Electrical sensing of clamping jaws (Tool removal control for prevention of unintentional return of pull bridge–added safety for operator & tool) - Integrated coolant system - Coolant swivel system (no electrical switch function) - 3-sided enclosed splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip screen with magnet insert - Stainless steel control panel with permanent labeling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled; the machine frame has been fully reconditioned. The following wear parts have been replaced/renewed: - New trapezoidal screws and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - Cooling system incl. coolant/lubricant swivel system is new - New 2-speed SEW geared motor - New electrics (Siemens) - New safety door instead of a light barrier - New clamping jaws - All sheet metal parts, including covers, chip chute, basket, screen, and spindle guard, are new. - Stainless steel control panel with permanent labeling - Machine repainted with 2-component structural coating The machine bears the "CE" mark from the manufacturer. General Information The dual spindle drive ensures a smooth and central pulling point as well as a consistent broaching speed. The machine is primarily designed for the production of keyways up to 18mm (from 16mm keyway tools, only with stepped tool shanks). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Because of the universal construction of the pull bridge and machine table, it is possible to broach with both profile and flat broaching tools without the use of additional pull heads.

Stanje: rabljeno, Leto izdelave: 2000, Dolžina brušenja 600 mm Širina brušenja 300 mm Iodox U A Ugspfx Akystk Magnetna vpenjalna plošča 600x200 mm Premer brusnega koluta 220-300 mm Teža stroja ca. 2200 kg

Leto izdelave: 1971, stanje: rabljeno, General / Technical Data: Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6,000 kg Pulling force: 20 t Ijdjlwu Spjpfx Akyjtk Broaching speeds: 5 m/min Return speed: 16 m/min Maximum stroke: 1,320 mm Broaching stations: 3 Clamping surface: 370 x 620 x 105 mm Note: The machine is connected to power at our warehouse and can be inspected.

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Isdpegyd T Eofx Akystk Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Leto izdelave: 1971, stanje: rabljeno, General / Technical Data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Weight: 12 t Drawbar pull: 25 t Maximum lift: 2000 mm Clamping surface: 500 x 500 mm Table opening: 550 mm Power supply: 380 Volt / 50 Hz Accessories / Special equipment: Itsdpfx Aolwvm Ajkyjk - Tilting table Note: The machine is connected to power in our warehouse and can be inspected.

Leto izdelave: 1985, stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Iedpfx Aeixntwekyjtk Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Leto izdelave: 1960, stanje: nepreverjeno (rabljeno), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray Ijdpfehu E Egex Akyjtk

Stanje: nepreverjeno (rabljeno), Forst RF 16 Broaching Machine (Internal) -WKG 1371- Technical data: Manufacturer: Forst Model: RF 16 Max. pulling force: 16 t Isdpfx Akjhu E N Djyotk Max. stroke: 1200 mm Max. cutting speed: 5.6 m/min Max. workpiece diameter: Ø 700 mm Max. tool diameter: Ø 120 mm Workpiece mount bore: Ø 70 mm Note: Control valve is missing

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical Specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, infinitely variable Return speed: up to 34 m/min, infinitely variable Maximum stroke: 1,250 mm Broaching stations: 4 units Iedpfx Aelpadyskyjtk Equipment: - Automatic tool changer - Automatic parts feed (part-specific) - Hydraulic tool clamping device (part-specific) Note: High-performance production broaching machine for large-scale series production with high cutting speed!

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Itjdjtuuvzspfx Akyek Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Leto izdelave: 1971, stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Itjdpshpqquofx Akysk Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1960, številka stroja/vozila: 719, Manufacturer: Hurth Model: LF 00 Machine No.: 719 Year of manufacture: approx. 1960 Weight: approx. 400 kg General / Technical Data: Used horizontal keyway milling machine with crank-driven slot length adjustment and automatic depth infeed. Keyway width for cutter diameter: from 2 to 10 mm Slot length per pass: 0 to 60 mm + cutter diameter 10 depth feed rates: 0.03 to 0.3 mm Milling feed: 8 table traverse speeds via crank mechanism: 5.1 / 7.3 / 10.2 / 13.9 / 18.4 / 25.4 / 34.7 / 49.5 strokes/min Spindle speeds: 4 steps: 970, 1370, 1950, and 2750 rpm Table dimensions (fixed table): 160 mm x 355 mm Table elevation adjustment: 40 mm Table traverse (cross travel against the cutter): 110 mm Power supply / Spindle motor output: 380 Volt, 50 Hz / 0.8 kW / 920 rpm Approx. machine dimensions (L x W x H): 670 mm x 1100 mm x 1200 mm Ijdpsg Uq Dfsfx Akyotk Accessories / Special Features: Chip tray Coolant system Machine documentation Remarks: The machine is in a condition appropriate for its age. It is primarily designed for small to medium batch production. Easy slot length adjustment via crank mechanism.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, skupna masa: 2.900 kg, moč: 8 kW (10,88 KM), vhodna napetost: 380 V, število bročirnih položajev: 1, skupna širina: 6.100 mm, skupna višina: 1.900 mm, Manufacturer: Karl Klink Model: RW 10 Ijdpfxoxtcz Io Akyetk Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine no.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in the crossbeam: 85 mm Broaching tool clamping: Universal pull head for flat shanks up to 25 mm width Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the tool feeder machine body) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (without working area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special features: • The machine features manual-hydraulic control for the broaching stroke movement • The machine is equipped with an integrated coolant/lubricant system • A basic oil drip tray is mounted on the machine bed without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. Broaching needles, arbors and pull heads can be supplied upon request.

Leto izdelave: 1998, obratovalne ure: 1.339 h, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: FANUC Model: Series 18i-T Glavni pogon Itjdpfx Ajx D Itwskysk Število osi: 4 Hitrost vretena: 4000 vrt/min Oprijem orodja: VDI 30 Ta 4-osni horizontalni stružni stroj SCHAUBLIN 65 TM-3 je bil izdelan leta 1998. Robusten horizontalni stružni stroj nudi maksimalni premer struženja 380 mm in dolžino 534 mm. Z maksimalno hitrostjo vretena in pogonskih orodij do 4.000 vrt/min, ter revolversko glavo z 12 mesti in pogonskimi orodji, razmislite o nakupu tega horizontalnega stružnega stroja SCHAUBLIN 65 TM-3. Kontaktirajte nas za več informacij. Vrsta uporabe Struženje

Stanje: novo, Stroji za uravnoteženje 9D717 je vsestransko in zanesljivo orodje za uravnoteženje širokega spektra rotorjev v območju od 15 do 1500 kg. Ta stroj omogoča uravnoteženje različnih vrst rotorjev, vključno z notranjimi in zunanjimi konzolnimi rotorji, rotorji na posebnih osovinah ter rotorji v lastnih ležajih. Konstrukcija stroja je preprosta, vendar funkcionalna, kar omogoča enostavno uravnoteženje armaturnih (sidrnih) rotorjev, rotorjev generatorjev, tekalnih in ventilatorskih koles, tudi pri velikih začetnih neuravnovešenostih. Poleg tega lahko stroj izvaja uravnoteženje rotorjev v njihovih lastnih ležajih, kar zmanjšuje čas popravila in preprečuje poškodbe čepov rotorja. Primeren je za ugotavljanje in odpravo neuravnovešenosti rotorjev elektromotorjev, zobnikov v metalurgiji, vijakov in tiskarske opreme. Stroj 9D717 lahko uravnava tudi krožno simetrične dele, kot so impelerji in impelerji dimnih črpalk, ter odstranjuje neuravnovešenost na vretenastih delih, kot so bobni mlina in rotorji kombajnov. Skupaj je ta stroj izredno vsestranski in učinkovit pri uravnoteženju najrazličnejših vrst rotorjev, zato je idealna izbira za servisne in proizvodne delavnice. PREDNOSTI • Posebno zasnovani valji uporabljajo napredno patentirano "Exact Barrel" tehnologijo brušenja in so nameščeni na preciznih ležajih. • Monolitna zasnova nosilcev in baze odpravlja izgubo vibracij med uravnoteženjem, saj zmanjšuje število elementov "nihajnega sistema". • Omogoča merjenje velikih začetnih neuravnovešenosti brez poškodb stroja ter sprotno korekcijo neuravnovešenosti rotorja na stroju. • Nizka lastna resonančna frekvenca nosilcev omogoča uravnoteženje rotorja pri nizkih vrtljajih. • Širina podpornih valjev in valjnega bloka omogoča montažo rotorjev z zelo kratkimi čepi. Modularna zasnova omogoča namestitev rotorjev nestandardnih izvedb s pomočjo distančnikov ali orodja. • Nastavljiva višina valjnega bloka omogoča uravnoteženje rotorjev z različnimi premeri čepov. • Jermenski pogon z patentirano "Long stroke" zasnovo omogoča vrtenje kateregakoli rotorja z le dvema pogonskima jermenoma. • Frekvenčni pretvornik omogoča gladko pospeševanje in zaviranje elektromotorja ter brezstopenjsko spremembo vrtljajev rotorja. MERILNI IN NADZORNI SISTEM • Vaše uravnoteženje naredimo enostavnejše – glavna prednost naših sistemov uravnoteženja. • Proces uravnoteženja je prikazan v realnem času, na zaslonu pa spremljate stanje neuravnovešenosti rotorja za optimalen rezultat. • Največja občutljivost stroja v vseh trenutkih delovanja; vzpostavitev in kalibracijo izvaja operater sam. • Zunanji vibracijski vplivi ne vplivajo na rezultat meritve; stroj ima visoko stopnjo zaščite proti različnim vrstam motenj. • Enostavno usposabljanje in vzdrževanje za vsakega zaposlenega. TEHNIČNI PODATKI Območje mase uravnoteženih rotorjev: 15 – 1500 kg Največji premer rotorja (nad ležiščem): 1800 mm Itedpfxepdpn Uj Akyek Razdalja med sredinama nosilcev rotorja: 360 – 3000 mm Tip podpore: Valji Prenosni element za vrtenje rotorja: Jermen / Kardan Minimalno dosežena preostala specifična neuravnovešenost: 0,4 g*mm/kg Območje vrtljajev rotorja: 300 – 1500 min⁻¹ Moč elektromotorja: 7,5 kW Napajalna napetost: 380 V, 3 faze, 50 Hz Potrebujete stroj za drugačno nosilnost, premer ali dolžino? Izdelujemo uravnoteževalne stroje po meri vaših potreb. Kontaktirajte nas za najboljšo ponudbo! 👇

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Usata Giddings & Lewis Modello MC 50 Twin Pallet Centro di Lavoro Orizzontale con Mandrino Motorizzato, Cambio Utensili Automatico a 60 posizioni e Controllo G&L 8000A. Numero di serie: 445-1052. Anno di costruzione: 1987. Macchina precedentemente installata presso Rolls Royce Plc a Derby, Regno Unito. Disponibile immediatamente per la vendita e attualmente situata in Belgio, dove è possibile visionarla. Diametro mandrino – 130 mm Cono mandrino – ISO 50 Corsa mandrino (asse Z) – 915 mm Velocità mandrino (4 gamme) – 5 a 1500 giri/min Motore principale – 30 HP Dimensioni pallet – 1219 x 1245 mm Rotazione pallet – incrementi di 0,001°, 360.000 posizioni Portata massima pallet con cambiopallet – 5.000 kg Portata massima pallet senza APC – 9.000 kg Corsa longitudinale (W) – 1.700 mm Corsa verticale testa (Y) – 1.500 mm Corsa trasversale (X) – 1.800 mm Avanzamenti – da 1 mm/min fino a rapido Avanzamento rapido (X e Y) – 4.500 mm/min Avanzamento rapido (Z e W) – 3.000 mm/min Cambio utensili automatico – 60 posizioni Alimentazione elettrica – 415V, 3Ph, 50Hz CARATTERISTICHE E DOTAZIONI Itsdpfx Akju Dahnjyjk Refrigerazione interna ad alta pressione (25 Bar) attraverso il mandrino, macchina di alta precisione. Macchina precisa, ben mantenuta e regolarmente calibrata dal costruttore. Sonda di misura Renishaw. Dimensioni: Lunghezza – 11.679 mm, Larghezza – 6.502 mm, Altezza – 4.423 mm Peso – 40.329 kg

Stanje: rabljeno, številka stroja/vozila: 008014, Maks. dolžina plošče: 1250 mm Stranske horizontalne skupine: da Iedpfxswuz S De Akyetk

Stanje: rabljeno, številka stroja/vozila: 007400, Maks. širina panela: 800 mm Itjdpfx Akst Hmt Ieyek Maks. dolžina panela: 1250 mm Število injektorjev: 1 Pozicioniranje preko NC krmiljenja: da Stranske horizontalne skupine: da

Stanje: rabljeno, številka stroja/vozila: 008342, Maks. širina panela: 70 mm Maks. dolžina panela: 2100 mm Število injektorjev: 4 Itodpfox A Tc Usx Akyek Stranske horizontalne skupine: da

Stanje: rabljeno, Leto izdelave: 1963, skupna višina: 1.850 mm, skupna širina: 800 mm, skupna dolžina: 3.900 mm, Lastna teža: 3.000 kg Cena: Po dogovoru Hod: 1500 mm Kapaciteta: 10 t - Leto izdelave: 1963 - Dokumentacija na voljo: Da - CE certifikat: Ne Iedpfxey Auy Ro Akystk - Upravljanje: Konvencionalno - Moč [kW]: 7,5 - Transportne mere: 3900 mm x 800 mm x 1850 mm (d x š x v) - Transportna teža [kg]: 3.000 kg - Število transportnih paketov: 2 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračun razlike: DDV je odbiten za podjetja Dostava in odkup industrijske opreme mogoča kadarkoli Lukas van Rossum