Stroj Za Termo-Zatesnitev Posod nakup rabljenega (86.101)

Stanje: skoraj kot novo (rabljeno), Termoformirni stroj Njdpfx Asxtp I Ioh Uswg Nerjaveče jeklo Kompakten in enostaven za uporabo Do 100 shranjenih programov Do 10 ciklov na minuto 055 m³/h Moč: 9,5 kW Napetost: 400V / 50Hz / 3 faze

Stanje: rabljeno, Tip: Pralni stroj WB 40 Popolnoma izoliran stroj Nazivna zmogljivost do 60 ciklov/uro Električno/parno ogrevanje Senzor zamašenega filtra Nodpfxog Aa Uuj Ah Uswg Zunanje dimenzije: 170x270x230 cm Dobavni rok: 30 delovnih dni po plačilu

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates Nsdpswf Dvaofx Ah Ujwg - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, širina folije: 1.500 mm, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum draw depth: 700 mm - Maximum material thickness: 12 mm Features: Forming station - Siemens S7 control system - Fully automatic setup function - Top heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Bottom heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel) - Contactless emitter control (solid state relay) - Synchronous upper platen system (hydraulic adjustment) - Clamping frame (hydraulic adjustment) - Tooling table (hydraulic adjustment) - Central cooling via fresh air supply - Triple film sag detection with automatic air support function - Triple tool monitoring - Automatic air box evacuation - Quick-change system for mold, clamping frame, and pre-stretch plug, with fully and semi-automatic sequence - Mold tool extendable on front flap - Forming vacuum monitoring - Pre-blow automation via pre-blow time - Automatic basic setting with self-optimization of emitter temperatures - Heating, cooling, and cycle times - Cycle time calculation for all expansion stages - Position measuring system for table location Nwsdpfxeft S Eae Ah Ujg - Clamping frame, upper platen, and tool temperature control - Storage of programs and heating settings - Lower clamping frame for frame installation from below, central clamping via electric motor - Cascade for vacuum, pre-blow, demolding, tooling table, upper platen - Adjustable speeds for tooling table, upper platen, and clamping frame - Pneumatically lockable front door - Main switch cabinet climate control Automatic sheet and roll feeding - Film unwind stand including loading aid and pneumatic brake - Automatic sheet magazine centering (motorized adjustment) - Top heating usable as preheating or final heating (motorized travel) - Bottom heating usable as preheating or final heating (motorized travel) - Motorized sheet lifter - Vacuum pump for textured material - Material transport via transport chain and roller rail for improved handling, even with thin materials Options available on request.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, ILLIG univerzalni termoformirni stroj tip UA 155 4g solo Tehnični podatki - Siemens upravljanje - Največja velikost materiala: 1500 x 1250 mm - Največja površina oblikovanja: 1450 x 1200 mm - Največja višina orodja: 700 mm - Največja debelina materiala: 12 mm - Ogrevalna moč: 96 kW - Skupna moč: 105 kW - Električni varovalni tok: 160 A - Zmogljivost vakuumske črpalke: 250 m³/h - Potreba po stisnjenem zraku: 6 bar Oprema - Gornje gretje s 5-conskim HTS krmiljenjem (700ºC) - Spodnje gretje s 5-conskim HTS krmiljenjem (500ºC) - Hladilni ventilator D06 - Miza kaskada Nwodpfx Ahexlzqfo Uog - Vakuumska kaskada - Zgornji bat - Vključno z ILLIG hladilno enoto in ILLIG temperirno enoto

Stanje: rabljeno, Leto izdelave: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Data: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station: - Schleicher P03 control system - Automatic loading and unloading function Nwedpfx Aexlzrcjh Usg - Top heating system with ceramic emitters and 5-zone control - Bottom heating system with ceramic emitters and 3-zone control - Program and heating settings storage - Clamping frame with quick-change system - Parallel top frame, longitudinal rails for use with fixed format frames - Bottom clamping frame for frame installation from below, central clamping via electric motor - Lower table pneumatically operated, rapid/slow speed adjustable in percentage - Top plug assist with rapid/slow speed adjustable in percentage - Pre-blow automatic, percentage adjustable - Pre-vacuum function, percentage adjustable - Demolding automatic, percentage adjustable - Sheet sag control via light barrier with support air - 6-fold cooling fan system - Large front opening for easy tool change - Vacuum pump Sheet Feeding: - Automatic sheet feeding device - Preheating system in feeding for complete or preheating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustment of transport width

Stanje: delavnici obnovljeno (rabljeno), Top heating with small individual radiant heater controlled by toggle switch Bottom heating with large radiant heater Nwsdpfx Aofug Anoh Ujg Upper punch system Protective grid 4 cooling fans type D05 Pre-blow and automatic demoulding system

Stanje: rabljeno, Dolžina obdelovanca / mm Širina obdelovanca / mm Višina obdelovanca / mm UMA 19 brusilni stroj za zgornje brušenje Nwsdpfeyk Imrox Ah Ujg

Stanje: rabljeno, Leto izdelave: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-designed packaging solution developed for efficient filling of family-size ice cream tubs and multi-portion containers. Engineered for both artisanal ice cream producers and industrial-scale manufacturers, this machine combines precise dosing with gentle product handling to preserve texture and minimize waste. Constructed from robust stainless steel and equipped with hygienic, food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts—including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key features: * Accurate volumetric or servo dosing for consistent product weight and minimized give-away * Adjustable fill heights and speeds to accommodate containers from small family sizes up to larger multi-portion tubs * Hygienic design with easy-to-clean sanitary surfaces, CIP-compatible parts, and sealed safety guards * User-friendly interface for quick changeovers and reduced operator training time * Heavy-duty construction, suitable for continuous production environments * Smooth, low-shear filling preserves ice cream texture and limits air incorporation * Optional integrations for lid placement, sealing, date coding, and packaging conveyors Whether scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers reliable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety. Nwsdpsynr Axefx Ah Uog Tub size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Cap closing: Available Stations: Cup dispenser > Main filler > Granular filler > Lid closer > Discharge conveyor Condition: Good Available: Immediately

Stanje: kot nova (razstavni stroj), obratovalne ure: 50 h, Uhlmann Thermoform Packaging System UPS 4 ETX for processing PVC forming film and aluminum lidding foil Base machine with modular technology and balcony design, consisting of 12 modules: - Forming film unwinding unit with 2 pneumatic expanding shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and splicing table for forming film - Intermittent forming film unwinding - 3-zone contact heater: - 6 heating circuits, individually controllable - simultaneous heating of at least 3 advances - heating plates open automatically when machine stops - Forming station with 4-column lift table guidance - Filling section, length 1,360 mm - Safety cover in filling area Lidding foil unwind on operator side with pneumatic expanding shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4-column lift table guidance: - integrated overload protection - automatic lifting of the upper sealing tool when machine stops - Free module for installation of an additional station Nwodjtndpzopfx Ah Ujg - Indexing chain feeder - Punching station with blister lowering - Waste cutter with integrated motor-driven transport of the punching grid - Smoothing device - Perforation station ET/DT - Monitoring of compressed air supply with machine stop if minimum value is not reached - Visio Scan - electrically interlocked safety doors - Fast format change due to: - plug-in format parts - quick-connect couplings for cooling water supply - Main drive with frequency-controlled three-phase geared motor - Control cabinet at machine rear, swing-mounted Operating control Paccontrol - 10.4" TFT color display, resolution 640x480 pixels - Processor 68C030 - Operating system OS9 2.9 - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Programmable logic controller in modular design: - B&R PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - external program memory Technical Data UPS 4 ETX: - Cycles: - ET area: min./max.: 15/50 cycles/min. depending on film quality, feeding, and format design - Format range: min./max. advance in filling area: 64/226 mm min./max. film width: 100/300 mm min./max. punching width: 28/284 mm max. forming depth: 12 mm - Compressed air: - Input pressure: approx. 6 – 8 bar 4 Simtap feeders

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Termovezni stroj PLANAX COPY BINDER 2 Potrebeno popravilo: Koda napake AC13. Nedpfexuifcsx Ah Uowg Gre za mehansko napako. En motor se še naprej vrti (čeprav bi se moral po končanem vezanju ustaviti). Ogrevalni krog je očitno v redu. Število listov: 5 – 330 listov Format Predvsem do DIN A4 (glede na dolžino veznega traku) Dimenzije stroja ca. 355 × 588 × 283 mm (G׊×V) Teža: ca. 21 kg Priključna moč: 230 V, 50 Hz, 400 W Čas ogrevanja oz. vezanja Pri prejšnjem modelu: čas ogrevanja ca. 6 min; delovna temperatura ca. 143 °C Materiali in poraba Uporabljajo se tako imenovani „Copy Strips“ – termovezni trakovi iz 100 % lanene strukture, na voljo v različnih širinah in barvah. Cena je zelo dogovorna. Ponudbe dobrodošle.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EEE82, vhodna napetost: 380 V, Prodajamo naš popolnoma delujoč visokohitrostni pakirni stroj Foodtainer. Stroj je bil uporabljen izključno v obdobju april–junij za zapiranje živilskih posodic, napolnjenih z belušem. Stroj nas nikoli ni pustil na cedilu in je bil vedno vzdrževan, kadar je bilo potrebno. Na voljo je popolna navodila za uporabo. Naš tehnik vas z veseljem uvede v delo s strojem. Možen je takojšen ogled stroja. Nwsdpow Rnuisfx Ah Ueg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Completely overhauled in 2017, with documentation. Nwodpfx Ahewqd Ado Usg

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), A large-format vacuum thermoforming machine by Geiss is available. Sheet cutting dimensions (min.): 1100mm/1300mm, (max.): 2100mm/1800mm, maximum forming depth: 620mm. Additional sheet format 1: min. 850mm/750mm, max. 1850mm/1250mm. Additional sheet format 2: min. 1050mm/800mm, max. 2050mm/1300mm. Included is a separate feeding unit with pneumatic sheet separation equipment, an automatic alignment device for sheet blanks in both longitudinal and transverse direction, a pneumatic pusher for removing formed parts from the feeding unit, fully automatic central lubrication for the feeding machine, several exchange pallets for window sheet sets, a storage rack for window sheets, a vacuum control system with four independently adjustable flow stages, and an air treatment system. Documentation is available. On-site inspection is possible. Nedpfowih Arsx Ah Uewg

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je polavtomatski vakuumski skin pakirni stroj (traysealer) Sealed Air za Darfresh skin pakiranje. Pakirna zmogljivost: 15 kos/min, zmogljivost cikla: 1,5 cikla/min, širina folije: 562 mm, maksimalne dimenzije izdelka X/Y/Z: 670 mm/470 mm/50 mm, razpon dolžine pladnja: 135 mm-700 mm, razpon širine pladnja: 120 mm-520 mm, razpon višine pladnja: 5 mm-50 mm. Dimenzije stroja X/Y/Z: pribl. 1050 mm/1650 mm/1250 mm, teža: pribl. 500 kg. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Nwedpjxaphbjfx Ah Ujg

Stanje: rabljeno, Leto izdelave: 2025, Overview This roll-fed hotmelt labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines and handles both cylindrical and shaped containers made of glass or PET. It applies wrap-around OPP labels at very high speeds while ensuring excellent efficiency and reliability. The machine features modern equipment such as automatic label splicing, brushless motor-driven feed screws, and a remote support function. It is currently available for sale. Technical Data - Output: nominally 48,000 bottles per hour (max. mechanical speed: 58,000 bottles per hour) - Formats: Cylindrical and shaped containers, PET or glass, e.g., 500 ml PET round bottle (wrap-around OPP label) - Machine diameter: 1,320 mm - Pitch: 125.60 mm - Label type: roll-fed OPP hotmelt wrap-around labels (30–40 μm thickness, 30–175 mm height) - Plate rotation: motorised belt (R version) Nwjdsxgik Aspfx Ah Ueg - Main drive: servomotor - Electrical connection: 400 V (+/-10%), 50 Hz, 3PH + N + PE - Conveyor height: 1,100 mm - Conveyor chain: plastic, flat, 82.5 mm width, 4 mm thickness - Low-voltage control: 24 V DC - Ambient conditions: 5–45 °C; altitude up to 1,000 m - Control cabinet: stainless steel with integrated air conditioning - Standard lubrication: central, manual Additional features: automatic label splicing, dual roll holder, quick-change platforms, fallen bottle detection device, remote maintenance

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 372, skupna širina: 3.750 mm, skupna dolžina: 10.600 mm, skupna višina: 2.700 mm, moč vakuumske črpalke: 5 W, ogrevalna zmogljivost: 100 kW (135,96 KM), priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, 1 rabljena WM FC 780E linija za termoformiranje iz role, s predgrelcem KVH 83, popolnoma delujoča, možnost ogleda v delovanju. Trenutno uporabljena za oblikovanje pladnjev iz PP in RPET, predvsem za prehrambeno embalažo. Stroj je v vsakodnevni rabi in proizvaja izdelke vrhunske kakovosti. Zato je vzdrževan po najvišjih standardih, izključno z originalnimi rezervnimi deli WM. Vsi preostali rezervni deli (zaskočniki, verige ipd.) so vključeni v ceno linije. Cena vključuje predgrelni modul za obdelavo PP, rezervne dele ter nakladanje na vaš prevoz. Po zagonu nove linije (januar 2026) je ta linija WM na voljo takoj. Tehnični podatki WM 780E s/n 372 l. 2008: ODVIJALEC Nwjdpox Uym Hsfx Ah Ueg Maks. premer role (mm): 1.200 TERMOFORMIRNI STROJ Maks. dimenzija orodja (mm): 780 x 570 Maks. dimenzija orodja z pnevmatskim okvirjem (mm): 750 x 570 Maks. globina oblikovanja (pozitiv/negativ) (mm): 130/130 Maks. širina folije (mm): 810 Maks. pomik folije (mm): 570 Prisilna sila vpetja (daN): 30.000 Zgornje/spodnje gretje, instal. moč (kW): 50/50 REZALNA STISKALNICA Maks. dimenzije reza (mm): 760 x 550 Sila vpetja plošče (daN): 60.000 Hod zgornje/spodnje plošče (mm): 150/150 Grelna plošča rezalne letve (kW): 7,8 VERTIKALNI ZLAGALNIK Maks. dimenzije zlaganja (mm): 760 x 550 NAVIJALO ODPADKOV Maks. premer role odpadkov (mm): 600

Stanje: dober (rabljeno), 130 RABLJENA Prevrtena posoda za testo. TEHNIČNI PODATKI: - maks. dvig: 205. ZUNANJE MERE (v cm): - višina: 377 - širina: 120, - dolžina: 140. Naprava pripravljena za ogled se nahaja v našem skladišču (36-068 Bachórz, Poljska). Na voljo so plačljive možnosti: prevoz / montaža / zagon. Naveden je neto znesek. Govorimo angleško, nemško, francosko, rusko, ukrajinsko. Nwodpfx Ahew Ugt Eo Ueg V naši ponudbi boste našli pekovske peči, vozičkaste peči, etažne peči, slaščičarske peči, trgovinske peči, pekovske stroje, linije za kruh, linije za žemljice, linije za pecivo, linije za rogljičke, stroje za bagete, mesilce, mešalnike, stroj za valjanje, stroje za rogljičke. Oglejte si vse naše oglase.

Stanje: zelo dobro (rabljeno), 073 USED Bowl Tipper for Diosna SPV 160 Mixers. Suitable for WP Haton bread lines. The machine is available for inspection at our warehouse (36-068 Bachórz, Poland). Nwsdewfdb Aepfx Ah Usg Paid options available: transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. Our offer includes deck ovens, rack ovens, confectionery ovens, shop ovens, bakery machinery, bread lines, roll lines, cake lines, croissant lines, baguette machines, mixers, spiral mixers, dough sheeters, croissant machines. See all our ads.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Nova čelna brusilna stroj DELTA tip LB300 Specifikacije: Nwjdsyi Ui Dopfx Ah Uog Maksimalna brusna dimenzija: 330x140 mm Največja hitrost: 2840 obr/min Vzporednost: 3 μm/100 mm Ravnost: 3 μm/100 mm Teža stroja: 400 kg Moč motorja: 2,2 kW Leto izdelave: 09-2023 Stroj je opremljen z: Magnetno mizo Novo brusno ploščo Mazalni sistem

Stanje: dober (rabljeno), GGM Dishwasher GS340PM-EK Product Advantages - Electronic control panel with LCD display for user-friendly operation - Integrated descaling system – no external descaler required Design - Double-walled dishwasher with detergent and rinse aid pump - Undercounter unit - With detergent and rinse aid pumps - 2 wash arms for effective cleaning - With rinse arms - Door opening equipped with safety system - 4 wash programs - High washing performance with excellent cleaning results Technical Features - Electric detergent dosage - Rotating, non-clogging wash and rinse arms - Wash chamber with dual filter system - Electric rinse aid dosing pump (white hose) - Drain pump transfers wastewater over an elevation into the drain connection Dimensions - Width: 582 mm - Depth: 610 mm - Height: 822 mm - (H x D x W: 822 x 610 x 582 mm) - Basket size: 500 x 500 mm - Insertion height: 340 mm Water Connection - Water inlet: R 3/4" - Water outlet: 1 3/4" Details - Inlet water temperature: 55 °C - Wash temperature: 50 - 60 °C - Rinse temperature: 82 °C - 85 °C - Max. dish height: 320 mm (incl. rack) Wash Cycles - Program 1: Wash time 60 seconds, up to 60 racks/hour - Program 2: Wash time 120 seconds, up to 30 racks/hour Nwedpfsx Elrpex Ah Uog - Program 3: Wash time 180 seconds, up to 20 racks/hour - Program 4: Wash time 480 seconds, up to 8 racks/hour - Water consumption per cycle: 2.60 l Capacity - Tank capacity: 23 l - Boiler capacity: 5.50 l Electrical Connection - Power: 3.90 kW - Voltage: 230V, 400V - Phase(s): 1N/PE-3N/PE - Frequency: 50 Hz Weight: 64 kg RRP €3,254.99 Installation Video GS340PM-EK A detailed manual is available under the "Download" tab. Scratch on the right side Find more new and used items in our shop! International shipping costs on request!

Leto izdelave: 2025, stanje: novo, Fully automatic thermoforming machine: Cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food products, meat, seafood, fruit, vegetables, medical items, and household goods. Key components made from stainless steel, easily replaceable modular forming molds, water cooling system for the thermoforming tool and sealing unit. Vacuum pump by BUSCH (Germany), PLC, touchscreen, and servo motor by OMRON, relays and circuit breakers by SCHNEIDER. Top packaging materials: heat-sealable films; bottom packaging materials: thermoformable sealing film; both rigid and flexible films can be used. Nwedpfov Nkz Sex Ah Ueg Specifications: Total power: 380V, 13kW; Compressed air: 1m³/6bar; Vacuum: 0.8–1.0m³/6bar; Water: 4 liters/min; Max. top film width: 390mm (usable width 350mm); Cavity length: 200mm; Max. forming depth: 80mm (dependent on bottom film thickness); Loading area: standard 1m (optional extra length available); Packaging capacity: 6 cycles/min; Machine dimensions: L4560×W1020×H1950mm; Weight: 1500kg. Please note that our new machine prices are often below typical used prices. Feel free to inquire and let us know your specific packaging requirements. Generally, 30-50 different new machines are available for immediate delivery from stock. For custom-built machines, we offer very short lead times from approximately 3 weeks. – All machines come with full warranty.

Leto izdelave: 2025, stanje: novo, Fully automatic thermoforming machine: cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food products such as sandwiches, meat, seafood, fruits, and vegetables, as well as non-food products, medical items, and household goods. Key components are made of stainless steel; easily interchangeable modular trays; water cooling system for the thermoforming tool and sealing module. Vacuum pump by BUSCH, pneumatic components by SMC, electronic components mainly from Schneider, photo sensors from SICK, PLC and touchscreen by Delta. Specifications: Top packaging materials: heat-sealable films, width: max. 400 mm; bottom packaging materials: thermoformable sealing film (rigid and flexible films may be used), thickness: 300 – 900 µm, width: max. 400 mm + 2 mm, forming depth: max. 80 mm (forming depth depends on the thickness of the bottom film); loading area: standard 120–150 cm (additional length available as option); max. idle machine cycle: 8 cycles/minute; power supply: 3P, 380V, 50/60 Hz; compressed air: 1.2 m³/min, 8 bar. Nsdpjv Nk Acjfx Ah Uowg Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. We usually have 30–50 different new machines available from stock for immediate delivery. For custom-made machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Device for sealing (tamper-evident/sealing) plastic containers with a neck diameter of 30-90 mm using security/freshness film. Max. machine cycle rate (idle): 40 cycles/minute; Power supply: 380V, 2.0kW; Machine dimensions: L1600xW800xH1160mm; Weight: 180kg. Please note that our new machine prices are often below the usual used market prices. Simply ask us and let us know your specific packaging requirements. – Typically, we stock 30–50 different new machines available immediately. For custom-built machines, we offer very short lead times from approximately 3 weeks. – All machines are supplied with a full warranty. Nodpjv Nk Tzjfx Ah Ujwg

Leto izdelave: 2025, stanje: novo, Fully automatic thermoforming machine for shaping and filling small plastic bottles with liquids, creams, or viscous products. Designed for use in the pharmaceutical, food, or chemical industries. Thanks to easily interchangeable, modular molds, bottles of various sizes and shapes can be produced. Suitable for manufacturing multipacks, with the number of packs freely adjustable. Dosing and filling of product takes place via a peristaltic pump, notable for its easy operation, cleaning, and adjustment. – Specifications: Packaging materials: PVC/PE composite film, PET/PVDC as an eco-friendly composite, PVC/EVOH ultra-high barrier composite film (e.g. for pesticide packaging); Packaging thickness: 0.25-0.35mm; Max. outer roll diameter: 400mm with standard core (70-76mm); Max. draw depth per side: 12.5mm; Max. forming area: 120mm x 210mm; Bottle height: 58~108mm; Filling range: 1~50ml/bottle; Max. machine cycle speed in idle: 25 cycles/minute; Power supply: 380V, 50Hz; Power: 17.5kW; Compressed air & consumption: 6bar, 0.4m³/min; Cooling water: temperature 14~18°C, pressure 1.5~2bar, closed loop 6L/min; Machine dimensions: L7200 x W960 x H1800mm; Weight: 2,200kg. Nsdpfx Ahsv Nk Aij Uswg Please note that our new machine prices are frequently below typical used equipment prices. Feel free to enquire and tell us about your packaging application. – We usually have 30-50 different new machines in stock and available for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines are sold with full warranty.