Stroj za termooblikovanje

ILLIG UA 100 ED

Leto izdelave: 1977, stanje: zelo dobro (rabljeno), številka stroja/vozila: 0392, Infeed width (mm): 500 kW: 7.5 Csdpfedt Rthjx Ahxogt A: 380

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM GMP150+2xPTUN2000 As new, unused The PTUN... module is a single drying unit for plastic material. The machine consists of the following components: • Hopper. Cgodpfx Ajvhb S Sshxst • Support frame. • Heating chamber. • Connection lines. • Air control valves.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Basic information: Year of manufacture: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Weight: 6000 kg Operating voltage: 400/415V 50Hz Cgsdpfx Asrfn Rvshxjt Power consumption: 20 kW Output at 20g/l: 1600 kg/h Touch screen control panel Feeding hopper with screw conveyor Complete documentation available in both paper and electronic forms (electrical schematics, CE conformity certificate, operating manual) Condition: very good (machine clean and well-maintained, used exclusively for expanding white polystyrene) For an additional fee, we can arrange transport as well as installation and commissioning of the machine by our technicians at a location specified by the customer.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, obratovalne ure: 41.685 h, Technical data: Rated power, kW: 11.3 Forming area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. draw depth (negative), mm: 100 Cycles/min (min.-max.): 48 Air consumption/cycle at 6 bar: 100 Nl (compressed air) Discharged thermal energy: With top heating approx.: 10,260 KJ/h Csdsq A Um Rjpfx Ahxsgt With top and bottom heating approx.: 17,715 KJ/h Special equipment: Hollow floor device available Control cabinet: included

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: A1711012, Pos.1 VEN CLEAN Smart Dust Removal Unit Compressed air dust removal system for cleaning workpieces to be painted, removing dust from profiled workpiece surfaces. Five rotating air blast stars are installed. These detach the dust from the surface. The loosened dust is extracted on both sides by suction ducts. An external extraction system must be provided by the customer. Technical Specifications: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization as jet rod (non-EX) with compressed air nozzles, compressed air consumption 840 NL/min Pos. 2 VEN SPRAY Comfort Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of construction: 2017 - Length: 4,350 mm - Working height approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price refers to refurbished machine - Current condition: machine not refurbished - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Continuously adjustable feed speed: approx. 2–6 m/min - With belt cleaning system featuring tungsten carbide scraper. Complete pre-equipment is available for subsequent installation of a second washer. - Gun control, Touch Screen CNC7000 - Installed color circuits: 1 pc. (optionally expandable) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) Cgedeu U Ryyjpfx Ahxjt - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer installation and commissioning of the system, as well as training for your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Stanje: zelo dobro (rabljeno), stiskalna sila: 150 t, širina mize: 3.100 mm, Zum Verkauf steht: 1 gebrauchtes, hochwertiges und sehr gut erhaltenes Bystronic Xpert CNC-Abkantpresse 3 Meter x 150 Tonnen mit motorischer Blechauflage. Bystronic Beyeler Xpert 150×3100 Hersteller: Bystronic Modell: Xpert150 Baujahr: 2010 Achsen insgesamt: 9 – Hinteranschlag 6-achsig: X1, X2, R1, R2, Z1, Z2 – sowie motorische vordere Blechaufrichtehilfe Hydraulische Werkzeugklemmung Freistehend, keine Unterflur-Grube erforderlich Kapazität / Biegelänge / Presskraft: 3 Meter x 3100 mm x 150 Tonnen Komplett gewartet durch Bystronic UK Allgemeine Informationen: Modell: XPERT150x3100 Cgedpettl D Nofx Ahxot Baujahr: 2010 Technische Daten: Arbeitslänge: 3100 mm Presskraft: 1.500 kN Hub: 315 mm Eilgang: 190 mm/s Arbeitsvorschub: 10 mm/s Rücklaufgeschwindigkeit: 150 mm/s

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Odlično ohranjen stroj, malo rabljen. Govorimo Angleško, Nemško in ex Yu jezike. Kontakt možen tudi preko WatsApp Cgsdpfx Ahsvcnuvoxjt

Leto izdelave: 1988, stanje: zelo dobro (rabljeno), številka stroja/vozila: 3284, • Protective screens around the machine. (min.) Material thickness: 0.65 mm (max.) Material thickness: 2 mm Technical specifications: Maximum/minimum film width: 450/350 mm Maximum forming area: 430 x 160 mm Maximum draw depth negative/positive: 6/20 mm (22 mm negative upon request) Maximum top heating: 10.15 kW Motor drives: 3.0 kW Total connected load at 100% duty cycle: 12.7 kW Operating air pressure: 6 bar Maximum air consumption (depending on production): 1250 l/min Maximum water throughput: 1.0 m³/h COMPACT AND ROBUST – designed for high continuous output with easy operation. Ergonomic design (e.g. removal height 1300 mm). QUICKLY CONVERTIBLE – from 30° to 90° film feed, allowing for maximum material utilization for both rectangular and round lids (easy heater change). PRECISION – The precise forming table guidance via guide columns with ball bushings. The safe, reliable guarantee of precision. Cgsdpfx Ahshbu E Hjxst OPTIMAL CUTTING ACCURACY AT HIGH ENDURANCE LEVELS Cam-controlled functional sequence guarantees the highest repeat accuracy.

Stanje: delavnici obnovljeno (rabljeno), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical Features: - Control: Siemens Simatic S7-300, OP 37 panel - Climate-controlled control cabinet - Top heater: 5 temperature control circuits via pilot radiators - Bottom heater: 5 temperature control circuits via pilot radiators - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Pneumatically actuated locking of upper reduction frame - Locking of lower reduction frame via cylinder - 4 cooling fans - Adjustable vacuum under the table via cascade control - Adjustable pre-blow/demould function via cascade control - Large front opening for tool change - Film sag control using photocell with support air - Automatic tool change system Under-table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Top punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change tool clamping system Sheet feeding: - Automatic raising of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for embossed material Codpfxjwf Dvaj Ahxsgt Optional retrofit: Preheating unit - Top heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Bottom heater pneumatically actuated, total field control, individual emitters switchable via toggle lever - Temperature control for top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via UA operator panel) Optional retrofit: Roll processing - Cross cutter and feeder rollers in loader - Roll stand RO 800

Stanje: rabljeno, Leto izdelave: 1988, Pressure: 400 t Distance between uprights: 1,100 mm Stroke: 250 mm Stroke rate: 25 – 75 strokes/min Distance table/ram, stroke fully up, adjustment up: 900 mm Table area: 1,100 x 965 mm Ejector force in table: 30 t Ejector stroke in table: 80 mm Ejector force in ram: 3 t Ejector stroke in ram: 60 / 70 mm Ram area: 980 x 800 mm Lateral upright passage: 800 mm Ram adjustment: 20 mm Drive power: 80.0 + 5.5 kW Weight: 47.0 t Space requirement (LxWxH): 3.5 x 3.3 x 6.0 m Cgodovuuknjpfx Ahxjt Control cabinet weight: 1.4 t Space requirement control cabinet (LxWxH): 4.9 x 0.5 x 2.6 m Multi-stage cold forging press with articulated drive with steplessly adjustable drive, hydraulic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, motorized ram adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in ram (3 t, 60 mm), motorized central lubrication Can be offered either without control system in place, or alternatively with new Siemens S7-1500 F control.