Iztiskalnik z enim vijakom

BATTENFELD UNI-EX 1-75-25 B

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Blsdpfxsiyynde Acmoh Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Stanje: rabljeno, Leto izdelave: 2006, Technical details: X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, Bledpspumdcofx Acmsh Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany Bedpfx Acehy Tp Demolh

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Blsdpfsdkdi Tjx Acmjh Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Stanje: novo, Leto izdelave: 2024, New Aurepa ADR tank trailer, gas, oxygen, nitrogen, argon, CRYOBASE Trailer for liquid nitrogen, liquid oxygen, liquid argon, gas, cryogenics New trailer: Year of manufacture: 2024, Germany All documents available Used tank: Working pressure: 3.85 bar Bljdjt R R Uqjpfx Acmsh Capacity: 2000 L We also have other tankers available for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen, methane. We are happy to prepare an offer for you or provide further information.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Price negotiable! Bledpfx Ajqabm Escmeh

Stanje: novo, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Stock machine "NEW" – available at short notice! (Subject to prior sale) CNC Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine table: Table size: 950 x 550 mm Table load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot distance: 150 mm Traverse ranges: Travel paths X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 - 700 mm Linear guides & speeds: Ball guides in X/Y axis Roller guides in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate for milling: 0 – 10,000 mm/min Minimum increment: 0.001 mm Tool magazine (CAM type) / changer: Number of magazine positions: 30 System: random Max. tool diameter: Ø75 mm Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm) Bedpfx Acsifn N Njmelh Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/contin.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant unit including 300-liter tank and pumps External coolant around the spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operating panel Electronic handwheel (wired) Central oil/air lubrication Fully enclosed guard Worklight Heat exchanger on electrical cabinet Auto-power OFF function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE Declaration of Conformity per European guidelines Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic supply pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required footprint: W3,160 x D3,000 x H3,000 mm (includes chip conveyor discharge to the left) Net machine weight: approx. 5,400 kg Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/contin.): 18.5/15 kW (FANUC motor) Tool magazine / changer: - Drum tool magazine with 30 positions, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC control), incl. cabling and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - ICS high-pressure coolant pump, 20 bar, for direct-drive spindles - Including cartridge filter - Belt-type chip conveyor with chip cart (discharge at front to left side of machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measuring, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ laser tool measurement system and tool breakage control in machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year 2025 – NEW) - Fully enclosed - Double gripper Available immediately

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over carriage: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° – 360° / 0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions / 5° Turret: Blodex Hgl Hjpfx Acmoh Number of tool stations: 12 (can be equipped with both fixed and driven tools) Turret indexing time: 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Axes travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Traverse speed: Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed rate: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Blsdpfexmaguox Acmjh Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: novo, Model designation Bsdpfx Acsgvquwomelh Shark 332-1 CCS