Stroj za termooblikovanje
ILLIG UA 250 4G BE 250 PR FHZ

Name: ILLIG UA 250 4G BE 250 PR FHZ
Brand: ILLIG
Availability: InStock

Leto izdelave

2007

Stanje

Rabljeno

Lokacija

Möckmühl

Stroj za termooblikovanje ILLIG UA 250 4G BE 250 PR FHZ

Prikaži karto

Podatki o stroju

Opis stroja:: Stroj za termooblikovanje

Proizvajalec:: ILLIG

Model:: UA 250 4G BE 250 PR FHZ

Leto izdelave:: 2007

Stanje:: rabljeno

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Zeppelinstraße 1, 74219 Möckmühl, Deutschland

Klic

Tehnične podrobnosti

Širina folije:: 1.500 mm

Podrobnosti ponudbe

ID ponudbe:: A4716288

Nazadnje posodobljeno:: dne 06.10.2025

Opis

Technical specifications:
- Maximum material size: 2500 x 1500 mm
- Maximum forming area: 2450 x 1450 mm
- Maximum draw depth: 700 mm
- Maximum material thickness: 12 mm

Features:
Forming station
- Siemens S7 control system
- Fully automatic setup function
- Top heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel)
- Bottom heating with 7 pilot emitters, adjustable via S7 touchscreen & joystick (motorized travel)
- Contactless emitter control (solid state relay)
- Synchronous upper platen system (hydraulic adjustment)
- Clamping frame (hydraulic adjustment)
- Tooling table (hydraulic adjustment)
- Central cooling via fresh air supply
- Triple film sag detection with automatic air support function
- Triple tool monitoring
- Automatic air box evacuation
Gjdpfsft S Easx Afqjil
- Quick-change system for mold, clamping frame, and pre-stretch plug, with fully and semi-automatic sequence
- Mold tool extendable on front flap
- Forming vacuum monitoring
- Pre-blow automation via pre-blow time
- Automatic basic setting with self-optimization of emitter temperatures
- Heating, cooling, and cycle times
- Cycle time calculation for all expansion stages
- Position measuring system for table location
- Clamping frame, upper platen, and tool temperature control
- Storage of programs and heating settings
- Lower clamping frame for frame installation from below, central clamping via electric motor
- Cascade for vacuum, pre-blow, demolding, tooling table, upper platen
- Adjustable speeds for tooling table, upper platen, and clamping frame
- Pneumatically lockable front door
- Main switch cabinet climate control

Automatic sheet and roll feeding
- Film unwind stand including loading aid and pneumatic brake
- Automatic sheet magazine centering (motorized adjustment)
- Top heating usable as preheating or final heating (motorized travel)
- Bottom heating usable as preheating or final heating (motorized travel)
- Motorized sheet lifter
- Vacuum pump for textured material
- Material transport via transport chain and roller rail for improved handling, even with thin materials
Options available on request.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2006

21 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 6298 ... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za brizganje z dvema K ARBURG 570S2200-400/170 e²

Nemčija

650 km

Stroj za brizganje z dvema K
ARBURG570S2200-400/170 e²

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 44.600 h, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljene dvokomponentne brizgalke s robotom Proizvajalec: ARBURG Tip: 570S2200-400/170e² Letnik: 2010 Zapiralna sila: 220 ton Razmik med stebri: 570 x 570 mm Min./maks. montažna višina: 350 mm Odpiralna pot: 1.000 mm Polž DN 1: 35 mm Maks. hodilni volumen: 154 cm³ Teža brizganca: 141 g/PS Polž DN 2: 30 mm Hodilni volumen: 59 cm³ Teža brizganca: 47 g/PS Upravljanje: SELGOCIA Oprema: 3 x jedrne izvlečne palice Vertikalna brizgalna enota Gedpfx Aju E E H Ssfqsil 6-osni robot, proizvajalec: KUKA, tip: KR 16 Wikut, letnik: 2010 Transportni trak Zaščitna ograja

Poglej podrobnosti

Mali oglas

Stroj za rezanje papirja Perfecta 168 TS PERFECTA Schneidemaschinenwerk Baumann Planschneider 168 TS + BASA 7 + Ablader

Lampertswalde

582 km

Stroj za rezanje papirja Perfecta 168 TS
PERFECTA Schneidemaschinenwerk BaumannPlanschneider 168 TS + BASA 7 + Ablader

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 1.680 mm, Oprema: varnostna svetlobna zapora, Cutting Line Perfecta Year: 2013, little used Larger, faster, more efficient: With a cutting width of 168 cm (66"), the Perfecta high-speed cutters handle large formats effortlessly. Comprising: - Pallet Loader Perfecta/Baumann BASA 7 - Paper Jogger - Rear Loading System - Perfecta 168 TS Guillotine Cutter - 3 color monitors with touchscreen: Cuttronic - Automatic adjustment - Corrosion-free, continuous air-cushioned surfaces on main table, side tables, and unloader - Photo-cell safety system - Number of knives: total 6 - Unloading System - Perfecta BA 6 to the left of the guillotine cutter Godjwr Dgxepfx Afqeil This robust 2013 cutting line is in excellent condition and still in operation. Viewing by appointment. Available immediately as a complete system: - BASA 7 automatic pallet feeder - Jogger table - ZTS 2750 automatic gripper transport system to the rear table of the 168 guillotine cutter - BA6 unloader. This cutting line is ideal for medium to large volume production, providing continuous, fast and precise cutting. The system features corrosion-free stainless steel surfaces on the cutting and side tables, a powerful blower for the air cushion system, squareness correction, and hold-down devices.

Poglej podrobnosti

Mali oglas

BYSTRONIC HIDRAVLIČNI KRIVILNI STROJ 3100X150 BYSTRONIC PR 150 X 3100

Prevalle

361 km

BYSTRONIC HIDRAVLIČNI KRIVILNI STROJ 3100X150
BYSTRONICPR 150 X 3100

Klic

Stanje: dober (rabljeno), HYDRAULIC PRESS BRAKE BYSTRONIC, 3100X150 TON, MAX STROKE 315 mm, FAST DOWN STROKE 190 mm/s, WORKING CYCLE 10 mm/s, FAST RETURN STROKE 150 mm/s, DIMENSIONS: 415x200x290 cm (h), WEIGHT: 11,000 KG Y1 Y2: hydraulic cylinder axes. X axis: backgauge forward and backward movement. R axis: backgauge vertical movement (up and down). Z1 and Z2 axes: backgauge stops movement to the right and left. X1 or relative X: single stop forward and backward movement. 7 axes total. The control unit also manages hydraulic crowning, which can be considered the eighth axis. Gisdpsvxipgefx Afqel

Poglej podrobnosti

Mali oglas

Doxato/Drama

934 km

Ploščo roll
SCHAEFERSRMVQ

Klic

Mali oglas

Stroj za toplotno oblikovanje TFT IMC 5030 (MIT WERKZEUGEN)

Bischofszell

463 km

Stroj za toplotno oblikovanje
TFTIMC 5030 (MIT WERKZEUGEN)

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, številka stroja/vozila: 403, Equipment / Further Specifications: Unwinding Unit: Roll Holder: single Max. Roll Diameter: 1000 mm Unwinding: automatic Thermoforming Machine: Max. Tool Size: 520 x 330 mm Max. Positive Forming Height: 15 mm Max. Negative Forming Height: 120 mm Film Width: 150 / 760 mm Stroke Length: 50 / 330 mm Max. HIPS Film Thickness: 1.8 mm Lower Table Stroke: 150 mm Clamping Force: 7,500 kg Installed Top Heater Power: 18.8 kW Installed Bottom Heater Power: 14.1 kW Idle Cycle Rate: 40 per min Main Drive Motor Output: 2.2 kW Film Feed Motor Power: 0.75 kW Operating Air Pressure: 7 kg/cm² Water Consumption at 12°C: ~30 l/h per 1 t Air Consumption at 7 kg/cm²: ~125 l/cycle per 1 t Installed Power: 50 kW 9x Tools: Article No. // Tool No. // Cavities // Description / Product: 3599 // 457 // 10 // Vending Cup; Capacity: 223 ml 593 // 460 // 8 // Coffee-to-go / Thermo Cup; Capacity: 300 ml / 12 oz 509 // 452 // 6 // Ice Cream Cup; Brimful: 140 ml / Usable Volume with 6 mm headspace: 120 ml 591 // 459 // 10 // Thermo Cup ⌀ 81/180 ml 740 // - // - // Standard Cup with Sealing Rim ⌀ 75-120 ml 3589 // 458 // 12 // Coffee-to-go / Thermo Cup; Capacity: 80 ml 595 // 456 // 10 // Vending Cup; Capacity: 150 ml 210 // - // - // Baking Tray / Technical Part / Plate or Tray Gijdpfx Afon D Ew Ieqjl 8000 // 455 // - // Granulate Cup 180 ml / Technical Part with Flat Sealing Rim

Poglej podrobnosti

Mali oglas

Delbrück

786 km

Ekstruder
Erema1007T

120.000 €

Začetna cena brez DDV

Klic

Leto izdelave: 2006, obratovalne ure: 15.000 h, Stanje: dober (rabljeno), For sale is an Erema 1007T Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250–350 kg/h The plant is currently processing HDPE, but it is also suitable for other plastics such as LDPE... The machine can be inspected during operation. A new extruder screw was installed in February. Gjdpfx Aeumubyjfqoil

Poglej podrobnosti

Mali oglas

Linija za prstne spoje Grecon ProfiJoint Weinig / Grecon ProfiJoint

Tauberbischofsheim

555 km

Linija za prstne spoje Grecon ProfiJoint
Weinig / GreconProfiJoint

Klic

Stanje: rabljeno, Leto izdelave: 2004, Kompaktna polavtomatska čelilna spajalna linija, sestavljena iz: - Rezkalnik PJ 150/500 - Prenosne mize za ročni prenos Gjdpjw Nbacjfx Afqsil - Enokanalne stiskalnice PJ 7/6100 li Rezkalnik: 2 paketa/min Stiskalnica: 2 cikla/min Vhodna dolžina: 150 – 700 mm Končna dolžina: maks. 6.100 mm

Poglej podrobnosti

Mali oglas

Stroj za oblikovanje in obrezovanje OMERA R4 / 12

Babberich

908 km

Stroj za oblikovanje in obrezovanje
OMERAR4 / 12

Klic

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Gsdjkvnumjpfx Afqjil Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Poglej podrobnosti

Mali oglas

Ravnalna stiskalnica Stierli-Bieger 2000 RP - 200 to Biege- und Richtpresse

Sursee

538 km

Ravnalna stiskalnica
Stierli-Bieger2000 RP - 200 to Biege- und Richtpresse

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5 m straightening beam. This allows you to process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated via the proven Stierli stroke fine adjustment control. This makes it very easy to use and enables fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyor, NC control, laser measurement, etc. (Note: The photo does not show the actual machine.) Gijdpfx Afoufhzveqel

Poglej podrobnosti

Mali oglas

Generator dušika Airtech Stickstoff GmbH Parker n2-20-80

Lübbecke

828 km

Generator dušika
Airtech Stickstoff GmbH Parkern2-20-80

Klic

Leto izdelave: 2023, Stanje: novo, On-site nitrogen generation system for the production of a wide range of purities, pressures, and flow rates. The system is composed of high-quality components such as filters and adsorbers, a nitrogen separation unit from Parker Hannifin, and compressors from Kaeser. If high-pressure compression is required, we cooperate with Bauer Kompressoren. Over 400 such systems have been installed for our customers. Gjdpsnq Di Tjfx Afqjil All systems are custom-assembled and adapted by us to your spatial requirements and operational needs. We also design and implement containerized systems for both indoor and outdoor installation. We look forward to your inquiries...

Poglej podrobnosti

Oglašujte tukaj