Brizgalni stroj, Golden + ravnanje

Arburg 470 C 1500-400 219783

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible. Dujdpfx Afjtyyn Hjlol

Stanje: rabljeno, Leto izdelave: 2008, vpenjalna sila: 160 kN, delovna prostornina: 251 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 8.200 kg, delovne ure: 37.200 h, premer polžastega transporterja: 40 mm, Dobavni pogoji: FCA Pegnitz Dsdpjwd Udlefx Aflsul Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, 1 used injection moulding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tons Tie bar spacing: TIE-BARLESS Screw diameter: 25 mm Maximum shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Dusdpfx Aju Eu Tnsflel Equipment: - 1 x core pull

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, delovne ure: 60.790 h, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Duodpfx Afsh Tk Rvsljl Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Table length 4000 mm Table width 1500 mm Number of torch heads 1 Control system SIEMENS 840D Power 6000 Watt Speed 10 m/min Dsdpfx Afeu N I Erjleul Machine weight approx. 19 t Space requirement approx. 9.5 x 7.3 x 3.1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 kW is a 5-axis laser machine. Description: - Max. sheet thickness: Steel: 20 mm / Stainless steel: 20 mm / Aluminium: 15 mm - Fully enclosed machine cabin - TruFlow 6000 laser - ADC cutting head - Positioning laser diode - Stationary, rotatable pendant control panel - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 44.600 h, Funkcionalnost: popolnoma funkcionalen, 1,0 kos rabljene dvokomponentne brizgalke s robotom Proizvajalec: ARBURG Tip: 570S2200-400/170e² Letnik: 2010 Zapiralna sila: 220 ton Razmik med stebri: 570 x 570 mm Min./maks. montažna višina: 350 mm Odpiralna pot: 1.000 mm Polž DN 1: 35 mm Maks. hodilni volumen: 154 cm³ Teža brizganca: 141 g/PS Polž DN 2: 30 mm Hodilni volumen: 59 cm³ Teža brizganca: 47 g/PS Dsdpfxeu E E H Ss Afloul Upravljanje: SELGOCIA Oprema: 3 x jedrne izvlečne palice Vertikalna brizgalna enota 6-osni robot, proizvajalec: KUKA, tip: KR 16 Wikut, letnik: 2010 Transportni trak Zaščitna ograja

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 83.000 h, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from the manufacturer Arburg, model 320S 350-60. Year of manufacture: 2000 Operating hours (automatic mode): 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request and for an additional fee. Price incl. VAT Duedpfxjhhuq As Afljl Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or are you interested in selling your own? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 17.000 h, vpenjalna sila: 220 kN, premer vijaka: 50 mm, Year: 2018 Control type: CC300 Operating hours: 17,000 h Storage location: MECA PLASTIC Availability: Available Clamping force: 220 t Opening stroke: 530 mm Tie bar spacing: 620 mm x 620 mm Platen dimensions: 900 mm x 900 mm Minimum/maximum mould height: 250/600 mm Maximum daylight: 1,220 mm Screw diameter: 50 mm Screw L/D ratio: 20:1 Shot volume: 432 cm³ Max. injection pressure: 2,002 bar Motor power: 29 kW Heating power: 15.3 kW Weight (clamping unit): 11.3 t Machine dimensions (L x W x H): 6.30 m x 1.80 m x 2.10 m Duedpevtm Uijfx Aflsl Core pulls: No Robot interface: Yes Bi-metallic screw: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5 m straightening beam. This allows you to process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated via the proven Stierli stroke fine adjustment control. This makes it very easy to use and enables fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyor, NC control, laser measurement, etc. Dedpjufhzvofx Afleul (Note: The photo does not show the actual machine.)

Stanje: dober (rabljeno), Leto izdelave: 1984, Offer 24126 Motorized Solid Bar Twisting Machine + Ring and Arc Bending Machine Technical Data: - Bending operation motorized, with automatic or manual mode - Bending capacity, square steel ST 37 up to approx. 30 mm - Bending capacity, flat steel ST 37 up to approx. 30 x 8 mm - Adjustable bending length between twisting units up to approx. 1200 mm - Min. twisting length 10 x material thickness (long side) - Preselection for bending time / bending length – twisting length - Right and left-hand operation - Tailstock - Arc and ring bending attachment GRB 66 with various roller sets - Bending capacity – flat steel 60x10 mm vertical R 700 mm Djdpfx Afjr Ik N Djljul - Flat steel 70x12 mm horizontal R 500 mm - Round pipe 1 ½" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Roller sets for round steel pipe 1 ¼", plastic 1 ½" - Standard roller set - Space requirements approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW - Weight approx. 250 kg