Stroji za brizganje

ARBURG 470 C 1500-400 Golden Editions

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Clamping force: 320 tonnes Tie bar distance: 720 x 720 mm Min./max. installation height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Moulded part weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Moulded part weight in PS: 31 g Control system: Selogica Cgsdsv S E Dgopfx Agqow Request technical specifications.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30214501, stružna dolžina: 2.000 mm, skupna dolžina: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over cross slide mm 480 MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Csdpfx Ageu Hl R Toqjgw Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle nose for tools according to DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max. tool magazine with chip conveyor) m 11*12 Width/height m 4.2/3.5

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.628 h, nosilnost: 3.000 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.647 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.450 mm, širina nosilnega okvirja vilic: 1.260 mm, lastna masa: 4.530 kg, vrsta pogona: Diesel, gradbena širina: 1.320 mm, Rough terrain forklift Load centre: 500 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: Good Front tyres type: Pneumatic Front tyres size: 275/70 R22.5 Front tyres condition: 60 - 80% Rear tyres type: Pneumatic Rear tyres size: 7.00-12 Rear tyres condition: 60 - 80% Cedpovgh Ikofx Agqegw Side shifter, 3rd valve, front work lights, heater, particulate filter, full cab, full free lift, CE certificate,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, nosilnost: 5.000 kg, dvižna višina: 5.000 mm, vrsta goriva: dizel, tip droga: triplex, proizvajalec motorjev: Yunnei EUR5, skupna višina: 2.650 mm, skupna dolžina: 3.900 mm, skupna širina: 2.080 mm, Oprema: bočni pomik, kabina, klimatska naprava, osvetlitev, podaljšek vilic, pogon na vsa štiri kolesa, sprednja zaščita, vilice za palete, Terenski viličar s pogonom 4x4 dizelski motor EUR5 Yunnei DEF30CZEF5 74kW 100KM nosilnost 5T teža viličarja 7,2T triplex drog Codpfx Asuzivvogqogw višina dviga 5m pnevmatske pnevmatike kabina s klimatsko napravo dolžina vilic 1220mm dodatno žlica v kompletu dodatne vilice dolžine 2000mm viličar je NOV

Stanje: novo, Leto izdelave: 2026, A professional folding machine with a 4.14 m working length, directly from the manufacturer Prod-Masz. Sheet metal thickness capacity: steel sheets up to 0.7 mm, bending radius: up to 160° for seam creation. Both cheeks are CNC-milled from solid material to ensure long-lasting durability. The machine is of robust construction, weighing in at 700 kg! Think there’s no company that can handle your bending needs? Think again! Prod-Masz is your bending specialist! Especially with our folding benches (Abkantbänke)! The sheet metal bending machine features a support at the exit for cut sheet metal, a protractor, angle stop, and gas pressure springs to facilitate easy raising of the bending beam. Maximum working width of the folding machine: 4140 mm Csdpscgmd Usfx Agqogw Bending capacity: up to 0.7 mm (steel sheet) Bending angle of the machine: 160 degrees Bending beam thickness: 20 mm Cutting with the rotary shear across the full working width Upper beam can be raised in three positions Clearance opening: 80 mm Graduated scale Angle stop Depth stops Weight of the machine: approx. 700 kg Optional accessories: Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet): +350 euros Hand seam folder: +75 euros The machine is CE-compliant and comes with a 12-month warranty. Delivery: every week Shipping: 500 euros We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT for domestic deliveries.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 20 h, nosilnost: 8.000 kg, dvižna višina: 4.800 mm, prosto dvigovanje: 1.570 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.780 mm, moč: 59 kW (80,22 KM), širina nosilnega okvirja vilic: 2.240 mm, dolžina vilic: 2.400 mm, lastna masa: 12.406 kg, vrsta pogona: Diesel, Dieselski viličar Težišče nosilnosti: 600 Širina vilic: 180 mm Debelina vilic: 75 mm ISO razred: Terminal West Tip droga: Triplex Menjalnik: Hidravlični pretvornik Hitrostni razred: 20 Stanje: Nov stroj Tehnično stanje: Novo Tip pnevmatik spredaj: Superelastične Cjdpfsxr R Efex Agqegw Stanje sprednjih pnevmatik: Nove Tip pnevmatik zadaj: Superelastične Stanje zadnjih pnevmatik: Nove Bočni pomik, nastavljive vilice, 3. ventil, 4. ventil, delovna luč zadaj, delovna luč spredaj, ogrevanje, popolna kabina, polni prosti dvig, CE certifikat, notranje ogledalo, zunanje ogledalo, rotacijska luč, sedež, sprednja in zadnja kamera.

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 106.864 h, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on time. Good condition, fully functional Cgedpfsrp Dyrex Agqjw Still in operation until week 11 Additional service reports and documents available Technical Specifications: Year of manufacture: 2003 Automatic operation: 106,864 hours Clamping force: 1,300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve at the injection unit for particularly high dynamics and reproducibility of the injection process. The back pressure is regulated, and the nozzle contact force is manually adjustable. - VE 557/00 AES Energy-saving system for automatic power optimization, enabling corresponding energy savings by continuously adjusting the pump drive speed to the power requirements of each injection cycle. - VE 460/00 ED Electromechanical dosing drive via a speed-controlled three-phase asynchronous motor. This improves productivity through simultaneous movements, gentler material preparation, and further energy savings compared to hydraulic dosing. On request and at an additional charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Inspection by appointment possible. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or to get in touch, please visit our website.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with 100 tonnes clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can offer on-site commissioning at your facility, ensuring proper operation. Extras: Rotary table, Geiger robot, Wanner granulator. Cgsdpfsp Audqox Agqew Technical Specifications CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal: 182 cm³ INJECTION VOLUME: Vertical: 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD THICKNESS: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj nova brizgalna naprava Arburg. Zapiralna sila: 1600kN, razdalja med stebri: 520mm, zapiralni hod: 364mm, izmetalni hod: 150mm, izmetalna sila: 40kN, brizgalna enota: 400, brizgalni tlak: 2500bar. Dimenzije stroja D/Š/V: ca. 6000mm/1800mm/2200mm, teža: ca. 6000kg, krmiljenje: Selogica, delovne ure: ca. 67h. Vključno z zaščitnim ohišjem s čistim zrakom FilterFanUnit in odjemnim robotom. Dokumentacija na voljo. Ogled na lokaciji je možen. Cgsdpew Rqwtjfx Agqew

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 67 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, skupna masa: 5.900 kg, proizvajalec krmilnikov: ARBURG, model krmilnika: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine is equipped with a take-out robot and an enclosure with a FilterFanUnit, ensuring clean operation. It is ideal for precision plastics processing and offers a mold height of 250 mm and a tie-bar distance of 825 mm. Contact us for more information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Advantages Technical Advantages of the Machine • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 variable displacement pumps • Ejector pressure P/Q-controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Center clamping plate set, 125 mm • Machine raised by 100 mm (heightened vibration elements) • 8 programmable digital I/Os • 6 electrical heating zones for the mold • 1 additional heating circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switch • Sound pressure level: 70 dB(A) | ± 3 Additional Information Cgsdpfx Agsx D E Dyeqsw • Screw diameter: 45 mm • Injection pressure (max.): 1580 bar • Shot weight (max. g PS): 232 g • Heating capacity: 9.7 kW | 5 zones • Net machine weight: 5900 kg