Mütek Map 750 nakup rabljenega (4.903)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle Itodpfjdwktkjx Abxeh - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160 Connection: 160 mm Fan: 2.2 kW Iedpfx Abjrb D Njxeth Airflow: 1,850 m³/h / 400 V

Leto izdelave: 2024, stanje: novo, Overview – The different variants *Not every option is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demo unit with discharge (only sketched in photo) *optional, if you want to feed with a wheel loader Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4m Equipped with 4 screens on the bottom that are extracted/suctioned. Unit price net from: €9,750 - Extraction components/hoses flat rate €945 net - Control for complete installation Unit price net: €2,750 - Demonstration extraction unit MMJET 160, with cleaning Connection 160, Fan 2.2kW Air flow 1850m³/400V automatic compressed air cleaning Unit price net from: €6,950 - Bale press B 400 Bale approx. 400x400x800mm (height adjustable) Up to 30 bales per hour with approx. 20kg each from €59,995 net *A reference installation (bale press) is located at ZIP code 64579 Gernsheim Technical Data: Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request) Bale weight approx. 20 kg (depending on material) Performance: approx. 30 bales per hour Iodpfx Absff Sbijxoth Buffer tank approx. 0.7m³ capacity Min./max. level sensors in the tank Hydraulic pre-compressor Hydraulic pressing ram Hydraulic power unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in press channel for easy bale ejection Dimensions (L x W x H): 3105 x 2830 x 2455 mm Weight approx. 1,500 kg mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation. The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO). The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting. mütek bale presses are equipped with a switch cabinet for control. In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request. Advantages of producing bales include: - Simple and safe storage - No loose dust - Minimization of storage volume - Reduced transport volume *Raw material requirements: - dry (max. 30% ATRO) - maximum length 35mm

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Itjdpod Db N Iofx Abxsh Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple cutting edges (reversible) Hydraulically operated pusher Itsdpfxjd Dgw Us Abxjh Screen perforation size as desired (10–40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features included: - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when the rotor runs idle - Rotor speed 70–90 rpm for high throughput - Intermittent control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer. Additional shredder options: - Height increase by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Controls for conveyor and overband magnet + €2,750 net (Start and stop synchronized with shredder) Raw material requirements: - Moisture content (atro) must be below 30% - Installation temperature: heated room, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. increase wear

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Iodpfx Abod E R D Soxsth Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput Iedpod Hkqhefx Abxoth - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Iedpjd Nnwlofx Abxeth Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) - Special pressing units + €2,950 (net) ---

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material. Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks. For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed. Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the size reduction unit as shown in image 1 - Fan, cyclone, and filter are optional components. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger machines available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding of PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ Significantly higher throughputs can be achieved when re-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen *metered feed, e.g., via conveyor belt or auger. Details available after a test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request Price per screen: €390 Price for replacement knife set: €679 Suitable for example for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optional with matching extraction/conveying system --- To select the right machine, the following information is required: - Length x width x height of the feed material? - Required screen size (final output size in mm)? - Required throughput per hour in kg? Iedpfx Abod N Dn Djxoth - Wall thickness in mm? - Material description Photos can also be helpful

Stanje: novo, Leto izdelave: 2026, Extremely powerful industrial magnet for iron separation Itodpfxjtqfhxj Abxjh Special price: €990 net (Shipping €14.90 net) *Please refer to image 2 for construction lengths The active side features a stainless steel end plate (material 1.4301). Threaded holes are provided on the reverse for mounting *Handle available on request The block magnet systems can be used up to a maximum operating temperature of +100°C. The magnet surface should be cleaned regularly of captured iron parts. Attraction heights for all types, e.g.: For an M5 steel nut approx. 60 mm For an M5 x 30 screw approx. 100 mm Mounting Example 1: Mounted above a conveyor belt, the iron parts "jump" onto the magnetic contact surface. Mounting Example 2: Installed in a pipeline system in direct contact with the material flow. For high separation security, a cascade arrangement of several block magnets in series is possible. Installation and safety instructions: When handling, even during unpacking and later mounting, ensure that no loose iron parts, such as tools or screws, are nearby. The magnetic force is so strong that painful injuries can occur if fingers get caught between iron parts and the active surface. No steel parts should be present within a minimum distance of 400 mm underneath the active surface.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40 mm, reversible multiple times, Rotor diameter: 260 mm, Control unit: Omron PLC, Itodpfogmfa Asx Abxeh Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 cbm, Hydraulically operated pusher, Screen perforation as required (15–40 mm), Extraction port Ø 160 mm, Weight: approx. 1,300 kg, Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options available at extra cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for sectional floor, 4-sided + €2,170 net (Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm). - Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Conveyor belt and overband magnet controls + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Raw material requirements: - Mineral contamination such as sand, stones, etc., leads to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor available immediately Advantages: + special rotor with reduced knife overhang + 22 kW motor + efficient square knives *For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm Hydraulically operated pusher Screen perforation currently (15/20 mm) *can be exchanged Suction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Plant color may vary Weight: 1920 kg Ijdpfxedv Eu He Abxsth Standard features: - Control cabinet with PLC control - Automatic star/delta start-up - Fast hydraulics - Automatic shut-off when rotor runs idle - Rotational speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *See last 2 images. - Additional knife row + €2,790 - Segment floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation) - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi. Itodpfowzarcex Abxsh

Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW Heures de fonctionnement : 275 Inclus : - 2ème rangée de couteaux - Hydraulique rapide, pour un débit accru - Préparation pour bande transporteuse Itjdpfxex Tfdhe Abxoh En option : - Bande transporteuse avec séparateur automatique de métaux Vos avantages : + Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm + Rotor spécial adapté pour bois dur et bois tendre + Économique en énergie et puissant, avec 37 kW au démarrage Données techniques : Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200 Volume de la trémie (m³) : 1,6 m³ Diamètre du rotor (mm) : 368 Vitesse du rotor (tr/min) : 65 - 125 Puissance requise (kW) : 37 Tamisage (mm) : selon accord Outils : 37/70 couteaux Diamètre de la buse d’aspiration (mm) : 200 mm Dimensions (LxLxH) : 2430x2410x1735 mm Poids (env. kg) : 3 500 --- Exigences pour la matière première : - La teneur en humidité (atro) doit être inférieure à 20 % - L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.

Stanje: kot nova (razstavni stroj), We are offering a second-choice column protector from manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Column protector, second choice Material colour: yellow Design: V shape Total height: approx. 750 mm Total width: approx. 124 mm Inner width: approx. 116 mm Total depth: approx. 65 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Pitch/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 9 mm Itsdpfx Aohr U Trebxjh 06x Hexagon bolts: M8 x 35 mm 06x Lock nuts: M8 06x Washers: M8 General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be quoted separately depending on the delivery location and scope.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Post protector, used Material colour: yellow Design: V-shape Overall height: approx. 750 mm Overall width: approx. 100 mm Internal width: approx. 93 mm Overall depth: approx. 60 mm Material thickness: approx. 3.50 mm Grid / hole spacing: approx. 300 mm Itjdpfx Aeh Ei Udsbxsh Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 11 mm 06x Hexagon bolt: M8 x 35 mm 06x Lock nut: M8 06x Washer: M8 General information about the item: This item is offered for collection only. Delivery or shipment beyond this is subject to additional costs, which can be requested from us separately depending on the delivery location and scope of delivery. Our range of services at a glance: (Prices upon request) Assembly, installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234. Visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Batch mixer type WBX 1100 1 control unit for mixer with frequency inverter 1 knife head 5.5 kW 1 manual shut-off valve 1 separate control panel ("remote control") - Maximum working volume: 770 liters - Mixing product: plastic granulate - Bulk density: approx. 0.7–0.8 kg/liter - Product characteristics: free-flowing - Mixing time: < 3 min. MACHINE DESCRIPTION Mixing drum: - Horizontal cylindrical mixing drum - End walls bolted to drum Mixing unit: - Mixing tools as ploughshares or inclined paddles, bolted to paddle arms in pockets Bearing: - Shaft supported in externally mounted flange bearing housings, with roller bearings Sealing: - Shaft sealing via easily replaceable gland packings - Gland packings purged by air Feeding: - 2 nozzles with flange, as per dimensional drawing Ventilation: - Via 1 nozzle with flange as per dimensional drawing - Includes filter bag with holder and welded-in protective grid Discharge: - Discharge via dead-space-free closing flap, pneumatically actuated - 1 discharge nozzle with flange, as per dimensional drawing Itsdpfxjza Ap To Abxoh Liquid addition capability: - Not available Inspection and cleaning: - Via 1 flap at the front of the drum (1700 x 550) - Flap closed with quick-release fastener - Work and accident safety by interlock magnet and limit switch (not wired) Materials: - Mixing drum: stainless steel 1.4306 - Mixer shaft: stainless steel 1.4306 - Mixing tools: stainless steel 1.4306 Subject to prior sale Inquiries by e-mail only Note: The machine is in storage and can be inspected on site. The buyer is responsible for organizing shipping. Shipping is not included in the offer price.

Stanje: rabljeno, Leto izdelave: 2010, x-pomak 500 mm y-pomak 700 mm z-pomak 500 mm A-osovina 240 (-120/+120) ° C-osovina 360 ° Upravljanje Siemens 840 D Prečnik planske ploče 440 mm Širina T-utor 14 mm Razmak T-utora 75 mm maks. opterećenje stola 400 kg maks. obrtaji 20.000 min⁻¹ Prihvat alata HSK 63 A maks. dužina alata 330 mm Prečnik alata 125 mm Vreme zamene alata (odeljak-odeljak) 4,5 sek Težina mašine cca 10,5 t Potrebna površina cca 2,5 x 5,2 x 3,5 m Mašina je, prema našoj proceni, u dobrom polovnom stanju i može se pogledati pod naponom uz prethodnu najavu. Iodpfxsxq R E Ns Abxjth Oprema: - Kuka robot KR200-3 comp Na raspolaganju su 3 identične mašine. Oprema, prikazani alati i stezni pribori uključeni su u isporuku samo ako je to navedeno u dodatnim informacijama. Promene i greške u tehničkim podacima i informacijama kao i međuprodaja su zadržani!

Leto izdelave: 2013, stanje: skoraj kot novo (rabljeno), This ploughshare mixer / inclined blade mixer is a customer return with zero operating hours. Prior to delivery, the mixer will be refurbished in our workshop. Machine designation: Ploughshare Mixer / Inclined Blade Mixer Manufacturer: MAP Model: WBHP 15000 Year of Manufacture: 2013 Operating Hours: Zero Material: Standard steel S235J Drive Motor: Choice of 160 kW, 200 kW, or 250 kW Description: Single-shaft horizontal mixer Type: Batch mixer Working Volume: 4,500 - 10,500 liters Tool Configuration: Ploughshares (bolted) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty Weight: 8,000 kg Technical Documentation: Yes Itedpfx Aon Ur S Uobxjh Note: As the tools are bolted, this unit can be used either as a ploughshare mixer or as an inclined blade mixer. This horizontal mixer is a customer return with zero operating hours. Prior to delivery, it will be refurbished in our workshop. Condition: New and workshop-refurbished Price: On request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: 0-250-08-1590, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.250 mm, pomik osi Y: 1.220 mm, pomik po osi Z: 125 mm, model krmilnika: Homatic 2000 IPC, število vreten: 28, največja hitrost vretena: 24.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 - 3,250 mm Working area Y-axis: 70 - 1,220 mm Itjdpfx Aozcda Ssbxjh Working area Z-axis: 12 - 125 mm (clearance 150 mm) Number of tool changer positions: 18 Spindles Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software EQUIPMENT 4 axes Console table 8 supports in X-axis, manually adjustable 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: Sale does not include the adapters, tools, and HSK holders shown in the images.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 29.600 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 530 mm, delovna prostornina: 412 cm³, tlak vbrizgavanja: 1.820 letvica, TEHNIČNE PODROBNOSTI Ijdezavalspfx Abxoth Zapiralna sila: 2.000 kN Premer polža: 50 mm Razdalja med stebri: 530 mm Prostornina giba: 412 cm³ Vbrizgalni tlak: 1.820 bar Teža vbrizga: 375 g Minimalna višina orodja: 200 mm Izmetalna sila: 62.000 N Izmetalni hod: 140 mm Hod odpiranja: 490 mm PODROBNOSTI O STROJU Krmiljenje: KEBA 1075 tipkovna kontrola Vgradna višina: 550 mm Dimenzije in teža Dimenzije (D x Š): 6.000 x 1.530 mm Skupna teža: 7.100 kg Grelnik: 18 kW Moč črpalke: 18.500 W Obratovalne ure: 29.600 h OPREMA Energetsko varčna servo hidravlika 2 x hidravlični vleki jedra 2 x zračni ventil Vmesnik Euromap 67 za robota Novo vgrajena, kaljena enota polža in cilindra s 50 mm polžem

Stanje: rabljeno, Tlak: 70 Izvlek: 750 Dimenzije (DxŠxV): pribl. 900 x 2300 x 1900 Prebijalni stroj GEKA Puma 70/E-750 Pozicijska miza je žal pokvarjena, sicer je stroj v dobrem rabljenem stanju. Tehnični podatki: Iodpfx Aswrkcysbxeth Prebijalna sila: 70 t Prebijalna zmogljivost: 27 pri 20 mm Maks. prebijalni premer: 70 pri 8,0 mm ali premer: 100 pri 5,0 mm ali pravokotno: 50 pri 8,0 mm ali pravokotno: 60 pri 7,0 mm ali pravokotno: 70 pri 6,0 mm Izvlek: 750 mm z -nožnim stikalom

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, skupna masa: 350 kg, skupna višina: 1.020 mm, skupna dolžina: 1.900 mm, skupna širina: 1.200 mm, nosilnost: 750 kg, Lopata Proizvajalec: WIFO-ANEMA BV Tip: Hidravlična priključna lopata za viličar Ho 750 Leto izdelave: 2000 Višina (mm): 1.020 Dolžina (mm): 1.900 Nosilnost (kg): 750 Teža (kg): 350 Itsdpozd Hu Tjfx Abxsh Širina (mm): 1.200

Stanje: rabljeno, prevoženi kilometri: 676.738 km, moč: 552 kW (750,51 KM), prva registracija: 09/2016, vrsta goriva: dizel, lastna masa: 15.500 kg, največja dovoljena obremenitev: 10.425 kg, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 09/2026, zavore: retarder, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: zrak, število sedežev: 2, dolžina tovornega prostora: 5.100 mm, velikost sprednje pnevmatike: 385/65/R22.5, velikost zadnje pnevmatike: 315/80/R22.5, največja hitrost: 90 km/h, število postelj: 1, Oprema: ABS, jeklene gosenice, kabina, klimatska naprava, računalnik na krovu, registracija tovornjaka, tempomat, zapora diferenciala, zavorni sistem na stisnjen zrak, žerjav, | VOLVO FH 16 s Penz 12Z dvigalom, letnik 2016 | Dvojni teleskopski dvigalo (2 izvleki) | Retarder | Avtomatik, EURO6 | Klima, multifunkcijski volan, tempomat | Potovalni računalnik | Vlečna kljuka | Lastna teža: 15.500 kg | Dolžina nakladalne površine za les: 5,10 m | Pridržujemo si pravico do napak in predhodne prodaje. Iedey U Eb Njpfx Abxsth

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Modern and fully operational Krauss Maffei precisionMolding 160-750 injection moulding machine, year of manufacture 2022. This machine ranks among the top models for industrial plastic injection moulding and is designed for precise, reliable, and efficient series production. Thanks to its advanced design, high performance, and precise control system, it is ideal for manufacturing demanding plastic components for automotive, electronics, consumer goods, and industrial applications. Technical data • Manufacturer: Krauss Maffei, Germany • Model: precisionMolding 160-750 • Year: 2022 • Power supply: 400 V / 50 Hz / 3P + N + PE • Rated heating capacity: 4.8 kW • Motor output: 25.2 kW • Total connected load: 55.0 kW • Full load current: 143.3 A Iodpfx Aeza A H Esbxjth • Fuse protection: 50 A • SCCR: 25 kA Machine features and benefits • Precision and reliability: enables production of highly precise parts with consistent quality • Energy efficiency: Optimised power and heating management reduces energy consumption • Modern control system: intuitive operation and precise setting of injection parameters • Production flexibility: suitable for various types of plastic parts, from small precision components to larger assemblies • Option to purchase injection moulds: allows immediate expansion of production capacity • Support during the production process: On serious enquiry, we can provide contacts of buyers for the manufactured parts Machine applications This machine is suitable for a wide range of industrial uses: • Automotive – precision body parts, covers, technical components • Electronics – device covers, switches, connectors • Consumer goods – parts for household appliances, toys, packaging • Industrial components – technical parts requiring high precision and reliability Condition and availability The machine is fully operational, maintained regularly, and ready for immediate production use. Personal inspection can be arranged upon request.