Klett Ekscentrični Utornik nakup rabljenega (247)

Leto izdelave: 1972, stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Nodpfxeb Tdquj Al Njcr Weight: 3.3 t

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of manufacture: 2000 Nominal force: 1600 kN Mass: 13,800 kg Nominal stroke rate: 55 spm Min./max. strokes per minute: 10/55 spm Max. insertions per minute: 17 spm Clutch pressure min./max.: 4.0–5.5 bar Max. stopping time: 0.22 s Safety distance: 355 mm Energy (at 15% nominal strokes): 14,500 kJ Ram stroke min./max.: 10/200 mm Ram adjustment: 110 mm Upper dead center (adjusted high): 430 mm Maximum ejection stroke: 60 mm Bed size (H x D x W): 78/750/1250 mm Ram size (D x W): 600/850 mm Shank diameter: 60 mm Throat depth: 370 mm Max. die size: 600/850 mm Max. die head weight: 344 daN Operating air pressure: 5.5–6 bar Stop position: TDC (Top Dead Center) Voltage: 380 V Frequency: 50 Hz Auxiliary voltage: 24 V NEWLY INSTALLED COMPONENTS: • Safety guards with safety locks; • Clutch friction discs; • Clutch pins and bushings; • Flywheel bearings; Nodpfx Alswaiw Ss Nocr • Flywheel oil seals; • Stroke change nosepiece; • Balancer cylinder seal kits; • Air pressure gauges; • Electrical control panel; • Inverter (speed variator); • Motor; • Motor pulley; • Refurbished work table (CNC machined) Supplied with six (6) months warranty, technical documentation and CE compliance certification. Electrical panel warranty twelve (12) months.

Stanje: rabljeno, Leto izdelave: 1962, Tlak 080 t Izteg 300 mm Hod 8 - 112 mm Število hodov 60 /min Razdalja miza/bat, max. hod zgoraj, nastavljivo zgoraj 467 mm Ncjdpfxoyq Smij Al Nor Površina mize 710 x 560 mm Prehodna odprtina v mizi 240 x 115 mm Višina mize nad tlemi 800 mm Površina bata 400 x 315 mm Nastavitev bata 80 mm Pogonska moč 7,5 kW Teža 5,1 t Potrebni prostor (ŠxGxV) 1,4 x 1,9 x 2,7 m POSEBNA AKCIJA Kot stoji in leži, BREZ dodatnih del Prosto natovarjanje na tovornjak

Stanje: rabljeno, Leto izdelave: 1962, Tlak 060 t Izmet 220 mm Hod 6 - 94 mm Ncsdpfx Aeyq Sl Sel Njr Število hodov 115 /min Razdalja med mizo in batom, največji hod zgoraj, največja nastavitev zgoraj 340 mm Površina mize 680 x 400 mm Odpiralna odprtina na mizi 120 x 70 mm Višina mize nad tlemi 750 mm Prehod med stenami ohišja 290 mm Površina bata 240 x 240 mm Nastavitev bata 57 mm Pogonska moč 3,7 kW Teža 2,8 t Prostor potrebujem (ŠxGxV) 1,5 x 1,5 x 2,2 m POSEBNA AKCIJA v stanju, kot je, BREZ dodatnih del brezplačno nakladanje na tovornjak

Stanje: rabljeno, Leto izdelave: 1978, Tlak 050 t Izteg 250 mm Hod 8 - 120 mm Število hodov 100 /min Razdalja med mizo in batom, največji hod zgoraj, nastavitev zgoraj 400 mm Ncsdpfjvut E Dex Al Nsr Površina mize 650 x 515 mm Prehodna odprtina v mizi 115 mm Višina mize nad tlemi 790 - 1020 mm Prilagodljiva miza 230 mm Površina bata 390 x 180 mm Nastavitev bata 70 mm Pogonska moč 2,0 kW Teža 2,6 t Potrebni prostor (ŠxDxV) 1,1 x 1,4 x 2,2 m POSEBNA PONUDBA kot stoji in leži BREZ zagona / BREZ dodatnih del prosto naloženo na tovornjak

Stanje: dober (rabljeno), stiskalna sila: 50 t, hod: 320 mm, Capacity: 50 tons Nedpjtt A T Tefx Al Necr Throat Depth: 225 mm Stroke Rate: 320 strokes/min Table Size: 500 x 800 mm Machine Dimensions (LxWxH): 160 x 120 x 260 cm Machine Weight: 6 tons

Stanje: dober (rabljeno), stiskalna sila: 80 t, globina grla: 400 mm, nastavitev hidravličnega cilindra: 80 mm, Pressing force: 80 tons Table size: 750 x 550 mm Ram adjustment: 80 mm Stroke length: 8 - 112 mm Strokes per minute: 78 spm Ncodpjugtkxofx Al Ner Throat depth: 400 mm Equipped with: - Air clutch - Safety guard Country of origin: Germany Machine dimensions (LxWxH): 2000 x 1200 x 2900 mm Machine weight approx.: 7000 kg

Stanje: rabljeno, Leto izdelave: 1976, Tlak 400 t Hod 30 - 300 mm Število hodov 55 /min Izvleček 500 mm Prehod med stenami ohišja 800 mm Vgradna višina 950 mm Površina mize 1580 x 1000 mm Prehodna odprtina v mizi 400 x 400 mm Višina mize nad tlemi 800 mm Površina bata 1000 x 720 mm Ncjdeylzwtjpfx Al Nsr Nastavitev bata 125 mm Pogonska moč 37,0 kW Teža 25,0 t Prostorska zahteva (ŠxDxV) 2,5 x 3,1 x 5,1 m

Stanje: rabljeno, Leto izdelave: 1989, Tlak 80 t Iztek 300 mm Hod 8 - 140 mm Število hodov 60 / 90 /min Oddaljenost miza/bata, največji hod zgoraj, nastavitev zgoraj 420 mm Površina mize 800 x 600 mm Prehodna odprtina v mizi 330 x 230 mm Nastavljiva miza 230 mm Višina mize nad tlemi 750 - 980 mm Površina bata 600 x 240 mm Nastavitev bata 100 mm Nodpfx Ajvuuavsl Nscr Pogon 4,5 / 6,9 kW Teža 5,5 t Dimenzije (ŠxDxV) 1,4 x 2,5 x 2,6 m Odobreno za ročno vlaganje skladno z nemškimi predpisi o varnosti pri delu (UVV) Z motorjem z 2 številoma hodov, hidravlično kombinacijo sklopke/zavore, hidravličnim varovalom za preobremenitev na batu, ročno nastavitvijo hoda, ročno nastavitvijo bata, nastavljivo mizo, ročnim centralnim mazalnim sistemom, dvoročnim in nožnim upravljanjem Stiskalnica je na voljo za ogled v delovanju v našem skladišču.

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) Ncsdpfxovuuais Al Ner With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Stanje: rabljeno, Presse excentrique à colonne unique WEINGARTEN type EV 63 Nodpfx Alsk S Htxe Njcr Numéro de machine 738 / 61 Année de fabrication : 1962 Force de pression : 63 tonnes Profondeur du col de cygne : 260 mm Surface de la table : 630 x 530 mm Ouverture de la table : Ø 210 mm Surface du coulisseau : 315 x 260 mm Course du coulisseau, réglable : 8–100 mm Réglage du coulisseau : 63 mm Alésage pour épaulement d’outil : Ø 40 mm, avec pièce de serrage Hauteur d’installation : max. 450 mm Nombre de courses : 115 coups/min Besoins en air comprimé : min. 4,5 bar Puissance du moteur : 4 kW Connexion électrique : 380 Volt, 50 Hz Hauteur de table au-dessus du sol : env. 750 à 900 mm - Déclenchement électrique du coup par pédale ou commande bimanuelle - Sécurité contre les surcharges par plaque de rupture - Combinaison embrayage-frein par embrayage à friction fileté WEINGARTEN avec sécurité de passage PMH - Palier de support de vilebrequin avant - Table de presse réglable en hauteur via 2 broches filetées - Graissage centralisé manuel - Armoire électrique séparée - Sécurité UVV pour opérations manuelles Encombrement (L x l x h) : 1750 x 1600 x 2430 mm Poids : 4,5 tonnes Bon état

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ekscentrična stiskalnica 160t / 1600KN Ncedjwir U Eepfx Al Nor Siemens 1200 PLC Nastavljiv hod 16–160 mm Nastavitev batnice 100 mm Plošča batnice 740 x 420 mm Debelina plošče batnice 100 mm Mizna plošča 1250 x 700 mm Debelina mizne plošče 180 mm Motor 15 kW Teža 16.000 kg Za nove stroje je dobavni rok cca. 4–5 mesecev

Stanje: rabljeno, Single-column eccentric press EBU Type 75 SKU Machine No. P 4598462 Year of manufacture: 1962 Pressing force: 75 tons Throat depth: 300 mm Table size: 800 x 620 mm Scrap chute: 325 x 225 mm Njdpfxsdzqltj Al Nocr Ram area: 470 x 180 mm Clamping shank bore: Ø 40 mm Table height above floor: 845 mm Stroke adjustment: 16 - 140 mm Ram adjustment: 80 mm Max. installation height: approx. 420 mm Strokes per minute: 60 & 105 spm Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with rupture disc in the ram - Tool monitoring system UNIDOR, type APS MINI - Mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds via 2-step V-belt transmission on the gear train - Two-hand operation - Simple swing-away work area guard - Table height adjustment at lowest position = leadscrew adjustment 50 mm below floor level - Switch cabinet and operator panel for tool monitoring included and placed beside machine - Automatic central lubrication - 4 machine feet Space requirement (L x W x H): 2600 x 2300 x 2450 mm Weight: approx. 5.5 tons Good condition

Stanje: rabljeno, Single-column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of manufacture 1984 Pressing force: 100 tons Throat depth: 400 mm Table size: 920 x 660 mm Ram area: 700 x 450 mm Clear opening at rear: 735 mm Stroke adjustment: 20 - 160 mm Ram adjustment: 80 mm Shut height at 160 mm stroke: max. 355 mm (without bolster plate) Shut height at 20 mm stroke: max. 425 mm (without bolster plate) Strokes per minute: 60 Bolster plate surface: 920 x 610 mm Bolster plate thickness: 90 mm Drop-through hole in bolster plate: Ø 210 / 180 mm Drop-through hole in machine table: Ø 210 / 180 mm Table height above floor: 800 mm (without bolster plate) T-slot width in table and ram: 22 mm Clamping pin bore: 50 mm Motor power: 11 kW Mains connection: 400 Volt, 50 Hz - Hydraulic overload protection in the ram - ORTLINGHAUS pneumatic clutch-brake combination - Motorized ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear drive with enclosed oil-bath gearbox - Two pneumatic ram balance cylinders - Automatic central lubrication system WOERNER - Stroke release via electric foot switch or two-hand control desk - Electrical control cabinet fixed to the machine - Operating manual and wiring diagram Nedpfou Rwa Iox Al Nscr - UVV safety for hand-insertion operations Space requirements L x W x H: 2200 x 1600 x 3250 mm Weight: 8.3 tons Good condition

Stanje: rabljeno, Single-Column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very little used eccentric punch press in original condition Machine no. 5250686 Year of manufacture: 1986 As new condition Pressing force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Drop-through hole in table: 300 x 200 mm Table surface, intermediate plate: 740 x 560 mm Drop-through hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height max.: 275 mm (with intermediate plate) Installation height max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 spm Motor power: 3 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic control - Spring-loaded single-disc brake operated by cam disk - Stroke release via pneumatic foot switch - Overload protection with shear plate in ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system BEKA Lubrication Technology - Operating manual and pneumatic diagram available Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons Nsdpfx Alei A A Tbj Necr Very good condition, as new

Stanje: rabljeno, Single-Column Eccentric Press MÜLLER GEFREES Type PDET 5 S/EK Machine No.: Year of manufacture: 1988 Pressing force: 5 tons Throat depth: 125 mm Standard clearance: 170 mm Table size: 280 x 220 mm Nodpfeik Srwox Al Njcr Scrap hole: Ø 90 mm Ram surface: 160 x 100 mm Stroke adjustment: 4 to 40 mm Ram adjustment: 30 mm Shut height at max. stroke, ram topmost: max. 210 mm Strokes per minute: 200 spm Clamping shank bore: Ø 25 mm Table height above floor: 900 mm Motor power: 0.55 kW Electrical connection: 380 Volt, 50 Hz - Pneumatic clutch-brake combination - Electric foot switch - Control cabinet mounted on machine Space requirements (L x W x H): 900 x 600 x 1700 mm Weight: 530 kg Very good condition

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen,

Stanje: dober (rabljeno), Ekscentrična stiskalnica DIGÉP SD63, 63-tonska ekscentrična stiskalnica naprodaj Ncjdpfxsiukrro Al Njr Proizvajalec: DIGÉP Tip: SD63 Letnik: 1975 – Tlačna sila: 63 t – Gib drsnika: 10–110 mm – Nastavitev drsnika: 70 mm – Največje število hodov: 60 obr./min – Velikost mize: 740 x 560 mm – Moč motorja: 5,5 kW, 400 V, 50 Hz – Skupna teža: ca. 4200 kg

Stanje: rabljeno, Pressure 80 t Outreach 320 mm Stroke 8 - 112 mm Table size 830 x 600 mm Strokes per minute 30 - 85 Ram surface 650 x 400 mm Ram adjustment 71 mm Clamping plate 990 x 550 mm Table height above floor level 810 mm Table height above ground 800 mm Frame clearance (front) 680 mm Frame clearance (rear) 520 mm Total power requirement 7.5 kW Machine weight approx. 7.7 t Space requirement approx. 1.5 x 2.2 x 3.15 m Equipment: - with feed rollers - fixed table Machine has been/is being partially overhauled: - Complete disassembly and inspection - Table and ram surfaces re-milled Ncsdpotqm Dmefx Al Nsr - New seals and hydraulic hoses - New main motor - Both main bearing bushings, third bearing bushing, and connecting rod bushing replaced - Shaft machined and newly bushed - Repainting - New control cabinet with PLC and touchscreen wiring - Current UVV inspection with brake time measurement

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clear space between frame walls: 590 mm Shut height: 690 mm Ncjdpfx Alevuun Ts Nor Table size: 1500 x 880 mm Slotted opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement: approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading/unloading and automatic operation according to CE guidelines With steplessly adjustable drive, light barrier (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic die cushion in table (20 t), automatic central lubrication, control panel with two-hand operation Clear distance between tie rods: 940 mm Lateral pass-through: 900 mm

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Nedpfjvut Ncjx Al Nscr Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. The machine can be inspected under power at our warehouse.

Stanje: rabljeno, Leto izdelave: 1977, Tlak 80 t Hod 8 - 112 mm Število hodov 65/min Izračanje 345 mm Prehod med stranicami okvirja 500 mm Vgradna višina 472 mm Dimenzije mize 840 x 610 mm Odprtina v mizi 280 / 315 mm Višina mize nad tlemi 800 mm Pritiskalna površina 650 x 410 mm Nastavitev bata 71 mm Pogonska moč 13,5 kW Ncjdpfsvut Npsx Al Nor Teža 6,10 t Potrebni prostor pribl. 1,5 x 1,9 x 3,0 m Za ročno polnjenje odobreno v skladu z nemškimi predpisi za preprečevanje nesreč (UVV) Z motorjem z možnostjo preklopa pola, pnevmatsko sklopko/zavorno kombinacijo (Ortlinghaus), mehanskim zaščitnim mehanizmom pred preobremenitvijo v batnih delih, ročno nastavitvijo hoda, motorizirano nastavitvijo bata, fiksno mizo, motoriziranim centralnim mazanjem, dvoročno upravljanje.

Stanje: rabljeno, Leto izdelave: 1982, Pressure: 150 t Throat depth: 520 mm Stroke: 30 - 200 mm Strokes per minute: 15 - 60 Distance between table and ram, max. stroke up, adjustment up: 650 mm Table size: 1600 x 1000 mm Table opening: 1040 x 140 mm Table height above floor: 1000 mm Clearance between machine side frames: 1000 mm Ram size: 1400 x 800 mm Ram adjustment: 120 mm Drive power: 20.0 kW Weight: 27.5 t Space requirement (W x D x H): 2.3 x 2.75 x 4.5 m Permitted only for operation with safety tools or fixed guards in accordance with German accident prevention regulations (UVV). Features: - Infinitely variable drive Nodpfxevuudbj Al Nscr - Pneumatic clutch/brake combination (Ortlinghaus brand) - Hydraulic overload protection in the ram - Pneumatic ram weight compensation - Semi-automatic ram adjustment Can be offered without commissioning or alternatively with new Siemens S7-1500 F control system.

Stanje: rabljeno, Leto izdelave: 2009, Pressure: 40 t Stroke: 4 - 100 mm Strokes per minute: 130 Throat depth: 230 mm Installation height: 475 mm Table size: 650 x 460 mm Table opening: 205 x 165 mm Table height above floor: 710 - 950 mm Ncedpfxsvzxpno Al Ner Table adjustment: 240 mm Ram area: 435 x 240 mm Ram adjustment: 85 mm Drive power: 5.0 kW Weight: 2.6 t Required space approx.: 1.2 x 1.7 x 2.3 m Approved for manual loading according to CE standards With motor, hydraulic clutch/brake combination, mechanical overload protection in the ram, manual stroke adjustment, manual ram adjustment, motorized central lubrication, adjustable table, two-hand and foot operation

Stanje: dober (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 40 t, širina mize: 660 mm, dolžina mize: 530 mm, skupna dolžina: 1.600 mm, skupna širina: 1.300 mm, skupna višina: 2.400 mm, skupna masa: 4.500 kg, vrsta nastavitve višine: mehanski, vgradna višina: 265 mm, nastavitev hoda: 95 mm, Eccentric Press LEN 40CA. Year of manufacture: 1984 (SMERAL TRNAVA, Czech Republic). Technical specifications: - Pressing force: 40 tons - Number of strokes (automatic mode): 70 / 142 per minute - Number of strokes (manual mode): 50 / 45 per minute - Slide stroke adjustment: 8–95 mm - Slide stroke: 80 mm - Table surface: 660 x 530 mm - Slide surface: 400 x 250 mm - Throat depth: 265 mm - Motor power: 3 / 4 kW - Machine dimensions: 1585 x 1245 x 2370 mm Nodjuq A Dkepfx Al Njcr - Weight: 4500 kg The machine is in good technical condition. Inspection and testing of the machine under power is possible.