Trumpf Trumatic 500 nakup rabljenega (397)

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), Na voljo je še vedno v uporabi stiskalni stroj Trumpf, vključno z že dalj časa nerabljeno enoto za avtomatsko nalaganje in razkladanje Trumalift. 1) CNC-stiskalni stroj Trumpf TruMatic 500, letnik 1993, največja sila rezanja: 220 kN, največja debelina pločevine: 6,4 mm, največja teža obdelovanca: 150 kg, največji premer izseka: 76,2 mm, sočasno gibanje: 108 m/min, število hodov: 900/min, dimenzije stroja X/Y/Z: pribl. 6700 mm/5800 mm/2200 mm, teža: pribl. 11000 kg. 2) Sistem za nalaganje in razkladanje Trumpf Trumalift SheetMaster 1250, letnik 1993, največje dimenzije pločevine X/Y: 2500 mm/1250 mm, največja debelina pločevine: pribl. 8 mm. Dokumentacija je na voljo. Možen je ogled na lokaciji. Crsdsyz Ap Ropfx Apljb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, prebijalna sila: 22 t, skupna višina: 2.300 mm, najv. debelina pločevine: 6 mm, skupna masa: 13.800 kg, širina mize: 3.000 mm, dolžina mize: 1.500 mm, obremenitev mize: 100 kg, proizvajalec krmilnikov: TRUMPF, največja dolžina izdelka: 6.900 mm, This TRUMPF TRUMATIC 500 was manufactured in 1998. It offers a maximum punching force of 220 kN and can process sheet thicknesses up to 6 mm. The machine can handle workpieces weighing up to 150 kg and features a working area of 3000 mm on the X-axis and 1500 mm on the Y-axis. Contact us for further information about this machine. • Maximum punching force: 220 kN (approx. 22 t) • X-axis working area: 3000 mm without repositioning • Y-axis working area: 1500 mm • Maximum sheet thickness (steel): 6 mm Crodpfx Apox Uqzzjlsb • Maximum punching diameter: 76.2 mm • Maximum workpiece weight: 150 kg • X-axis speed: up to 90 m/min • Y-axis speed: up to 60 m/min • Stroke rate: up to 900 strokes/min in nibbling mode • Power supply: 400 V / 50 Hz, three-phase • Electrical connected load: approx. 19 kVA • Required compressed air pressure: 6 bar The machine is in ready-to-operate condition. It comes with a comprehensive set of punches, dies, and tool holders. Dimensions Machine depth 6000 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 51.135 h, prebijalna sila: 22 t, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.600 mm, skupna masa: 13.800 kg, proizvajalec krmilnikov: BOSCH, število osi: 2, CNC punching machine from 1999. This TRUMPF TRUMATIC 500 offers a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and supports multitool functionality. If you are looking for a high-quality punching machine, you should consider the TRUMPF TRUMATIC 500 we have for sale. Please contact us for further details. • Programming system: Trumagraph • Supply voltage: 400 V / 50 Hz • Connected load: 19 kVA • Control voltage: 24 V • Required fuse protection: 3 × 35 A • Compressed air requirement: 6 bar • Multitool capable • Partially overhauled • Operating hours (mechanical counter): 51,135 h Additional equipment Cedpfx Ajyn Dd Ijplsrb • 2 tools with cassette (for commissioning) • Documentation available

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 40.507 h, prebijalna sila: 22 t, potovalna razdalja osi X: 2.500 mm, skupna masa: 11.050 kg, proizvajalec krmilnikov: BOSCH, število osi: 2, CNC vysekávací stroj z roku 1995. Tento TRUMPF TRUMATIC 500 nabízí maximální děrovací sílu 220 kN a pracovní oblast 2 500 mm. Je vybaven funkcí multitool a bude dodán se 2 nástroji v kazetě pro uvedení do provozu. Pokud hledáte vysoce kvalitní vysekávací stroj, zvažte model TRUMPF TRUMATIC 500, který nabízíme k prodeji. Pro více informací nás kontaktujte. • Programovací systém: Trumagraph • Napájecí napětí: 400 V / 50 Hz • Připojovací výkon: 17 kVA • Řídicí napětí: 24 V • Požadované jištění: 3 × 35 A • Požadavek na stlačený vzduch: 6 bar • Schopnost multitool • Dokumentace k dispozici Codpfxjyn Dkzs Aplerb • Stav: Částečně repasovaný • Provozní doba: 40 507 h Doplňkové vybavení • 2 nástroje s kazetou (pro uvedení do provozu)

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.270 mm, teža obdelovanca (maks.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL SPECIFICATIONS Pressing force: 220 kN Max. sheet thickness: 6.4 mm Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360 °/sec Max. punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Max. workpiece weight: 150 kg Tool stations: 15 positions Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Credpfxex I Hh Rs Apleb Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-on cylinders Small-part sensor for programmable part chute Parts box for good parts Chip conveyor with bin Scratch-free processing Air-cushioned installation Additional clamping unit Preparation for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Stop system for loading stack with spreading magnets Manually movable scrap frame system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.250 mm, prebojni premer: 76 mm, TECHNICAL DETAILS Sheet thickness – max.: 6.4 mm Pressing force: 220 kN Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis travel: 2,000 mm Y-axis travel: 1,250 mm Positioning Speeds Positioning speed X-axis: 90 m/min Crjdpfxjwur Dqs Apljb Positioning speed Y-axis: 60 m/min Simulated positioning speed: 108 m/min Rotary axis positioning speed: 360 °/s Minimum programmable increment: 0.01 mm or 0.01° Tools Number of tool stations: 15 Tool change time: 1.5 – 6.5 s MACHINE DETAILS Machine dimensions: 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 30.430 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, prebojni premer: 76 mm, TEHNIČNE PODROBNOSTI Tlačna sila: 220 kN Maks. debelina pločevine: 6,4 mm Premer prebijanja: 76,2 mm Pomik X-osi: 2.500 mm Pomik Y-osi: 1.250 mm Pozicionirna hitrost X-osi: 90 m/min Pozicionirna hitrost Y-osi: 60 m/min Pozicionirna hitrost simulacije: 108 m/min Pozicionirna hitrost rotacijske osi: 360 °/sek Teža obdelovanca: 150 kg Najmanjša programabilna pot: 0,01 mm oz. 0,01° Crodpfsxhfu Hsx Apleb Število orodnih postaj: 15 kosov Čas menjave orodja: 1,5 - 6,5 s PODROBNOSTI STROJA Mere & Teža Dimenzije: 6.400 x 5.800 x 2.100 mm Približna masa stroja: 11.050 kg Obratovalne ure: 30.430 h

Leto izdelave: 1994, stanje: pripravljen za uporabo (rabljen), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control system: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, equipped with storage interfaces for pre-/return storage, swiveling clamps, multitool control, air-cushioned installation, chip conveyor with container, Softpunch, thread forming unit, and TrumaLift SheetMaster 1600 FMC. The machine has been regularly serviced, and on-site inspection is possible. Csdpsq Ewi Asfx Aplsrb

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), zelo čist / malo ur uporabe Trumpf Trumatic 500R CNC prebijalni stroj naprodaj - 2,5 m x 1250 mm pločevina pred premikom - 1300 mm vrat - Nov / letnik 2000 - V celoti servisiran - Z dokumentacijo Codpfx Aeng Al Asplorb - V dobrem stanju, možnost ogleda v obratovanju Popolnoma opremljen z:

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Prebijalna sila: 220 kN Debelina pločevine: 8 mm Delovno območje: 2535x1280 mm Cjdpfoyrcycsx Apljrb Debelina pločevine pri nerjavnem jeklu: 4-6 mm Dodatna oprema: - Pripravljalne kasete - Miza s kroglastimi valji - Obratovalne ure: 97.000

Stanje: rabljeno, Leto izdelave: 2003, TRUMPF - TRUMATIC 5000R - 2003 - Programska oprema: WIN NT - Izsekovalni stroj: 220 kN - Območje pomika: 3125x1650 mm - Največja debelina pločevine: 6,4 mm - Linearni ATC za 21 orodij (1600) + 4 držala pločevine - Nosilci orodij (kasete) - Teža pribl. 17.500 kg - Nosilci orodij - Rabljeno stanje, kot je prikazano na fotografijah - Redno vzdrževano - Držala pločevine: 4 - Teža pribl. 17.500 kg - OPCIJE: MULTITOOL (5, 10 mest) NAVOJENJE / Gewindeschneiden GRAVIRANJE / Gravieren SIGNIRANJE / Signieren UPRAVLJANJE VALJALNIH ORODIJ / Umgang mit Rollwerkzeuge Crodpfx Asyl I T Uspljb PRESTAVNI CILINDER / Nachsetzzylinder - Nadzor valovitosti pločevine - Rabljeno stanje - Redno vzdrževano, dobro stanje: NOVA X os NOVE KOMPONENTE POD GLAVO - Po podatkih je bil LINIJSKI OJAČEVALNIK zamenjan okoli leta 2019 - Kratek video na voljo - Nahaja se v našem skladišču, demontirano, brez priklopa na elektriko

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 62.769 h, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 8 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, TEHNIČNI PODATKI Debelina pločevine: 8 mm Prebijalna sila: 220 kN Pomik X-os: 3.000 mm Pomik Y-os: 1.500 mm PODROBNOSTI STROJA Cedpfx Ajx I E Ezoplsrb Krmiljenje: Siemens Teža stroja: ca. 17.500 kg Obratovalne ure: 62.769 h OPREMA Kontrola menjave položaja strgala Oblikovanje navojev Označevanje – hitro vtiskovanje Rezanje z režami Multishear Multibend Ponovno nastavljanje odmika Valjčna orodja Kasete za pripravo Kroglična miza

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, dolžina obdelovanca (maks.): 3.000 mm, širina obdelovanca (maks.): 1.500 mm, TEHNIČNE PODROBNOSTI Delovno območje: 3.000 x 1.500 mm Maksimalna prebijalna sila: 220 kN Maksimalna debelina pločevine: 6 mm Crjdpexhfnaefx Aplob PODROBNOSTI STROJA Dimenzije in teža Dimenzije: 7.500 x 7.500 x 2.500 mm Približna teža stroja: 17.500 kg

Stanje: zelo dobro (rabljeno), Na prodaj profesionalni posnemovalec/ukosevalnik za pločevino TRUMPF TruTool TKA 500 (1A1). Stroj je namenjen izdelavi posnetij za varjenje in obdelavi robov jeklenih pločevin. Rabljeno, tehnično brezhibno, običajni sledovi uporabe so vidni na fotografijah. Industrijski razred – izdelava Švica/Nemčija. Tehnični podatki Moč 1.400 W Napajanje 230 V / 50–60 Hz Tok 6,5 A Model TruTool TKA 500 (1A1) Leto izdelave 2009 Proizvajalec TRUMPF Uporaba Posnemanje robov pločevine pred varjenjem Poševno rezanje za V- in X-zvare Obdelava konstrukcijskega in strojegradbenega jekla Delavnice, proizvodnja, jeklene konstrukcije Cjdjyhnukjpfx Aplsrb V kompletu Posnemovalec TRUMPF TruTool TKA 500 Originalni transportni kovček TRUMPF Dokumentacija/navodila proizvajalca Pribor, viden na fotografijah Naprava pripravljena za delo. Možnost preizkusa na mestu. Pošiljanje ali osebni prevzem – po dogovoru.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, Obratovalne ure: 49.000 ur Laser vklopljen: 37.000 ur Cedpjy Nl Ewsfx Aplerb aktivne matrice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, laserska moč: 6.000 W, Rabljeni Trumpf Trumatic L3050 CNC laserski rezalni stroj, 6 kW, z malo delovnimi urami naprodaj Tehnične informacije: Letnik: 2006 Dimenzije obdelovanca: 3000 x 1500 mm / 3 metre x 1,5 metra Tip laserja: TLF 6000 Moč: 6000 W / 6 kW Krmiljenje: Siemens Sinumerik 840D X-os (podolžno pomikanje): 3000 mm Cedpfx Apervhzmslerb Y-os (prečno pomikanje): 1500 mm Z-os (višinsko pomikanje): 115 mm Hitrost pomikanja: 200 m/min Največja debelina reza v jeklu: 25 mm Teža: 12 ton Dostava in montaža s strokovnim usposabljanjem sta mogoča po dogovoru.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, laserska moč: 3.000 W, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 115 mm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,500 mm Z-axis travel: 115 mm Working area: 3,000 × 1,500 mm Workpiece weight: 710 kg Drive and Control Csdoy D H Ipepfx Aplorb Drive: TLF 3000 Turbo Laser power: 3,000 W Controller: Siemens 840D Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 12 mm Sheet thickness (aluminium): 8 mm MACHINE DETAILS Overall dimensions (L × W × H): 9,800 × 5,300 × 2,000 mm Machine weight: 11,500 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2001, obratovalne ure: 13.817 h, model krmilnika: Siemens Sinumerik 840 D, laserska moč: 3.200 W, prebijalna sila: 22 t, potovalna razdalja osi X: 2.585 mm, pomik osi Y: 1.280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser ON hours: 71,637 h Operating hours: 80,188 h EQUIPMENT Sturdy C-frame Coordinate guide with integrated linear magazine Maintenance-free three-phase servo motors Programmable hold-down device for repositioning Sensor-monitored part slides 500x500 mm for punching and laser station Ejector cylinder at laser slide Programmable cutting gas pressure adjustment Crjdpfsy Iz H Isx Apljb Laser cutting head: 5'' lens, quick-change device, height control Multi-beam light barriers Quick-stop hydraulic system Extraction unit Compact dust collector Protective device against stray radiation at cutting head Brush table Marking function / fast beading Softpunch Blow-out device for small parts Repositioning cylinder Warpage detection Chip conveyor

Stanje: rabljeno, Leto izdelave: 2013, Punching force 220 kN Laser power in watts 4000 Travel path - x 2500 mm Travel path - y 1250 mm Cutting capacity in mild steel 8 mm Cutting capacity in stainless steel 8 mm Cutting capacity in aluminium 6 mm Workpiece weight 280 kg Machine weight approx. 24,000 kg Dimensions 10130 x 8898 x 2328 mm Standard features: - Moving ball transfer tables - Linear magazine for tool stations and clamps - 22 tool stations, 3 clamps - Foot switch for clamp closing - Flap for punched parts 500 x 500 mm incl. sensor - Chip container - 2 finished parts containers (punching and laser side) - First filling hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast hatch for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting support - Liftable laser cutting support - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized standby - Maintenance-free turbo radial blower - High-frequency excitation - Laser control TASC Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single tool holder with 360° rotation - Programmable stripper (active/passive/repeat) - Tool length compensation - Spray lubrication for punches - Punch slug extraction - Level monitoring for thread forming and tool lubrication Control: - Open control based on Rexroth IndraMotion MTX - 15" TFT color screen - Remote service via internet - Auto shutdown - Production planning Data transmission: - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam light barriers - Fast hydraulics shutdown - Warping detection - Calculation of fill level height in the punching console Programming: - Advanced workshop programming Codpsy D T S Usfx Aplerb Additional equipment: - Additional lens cutting head with 130 mm focal length - 1 function MultiTool - 1 function MultiShear - 1 function thread forming incl. thread counter - 1 function marking/fast embossing

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 30.904 h, laserska moč: 4.000.000 W, potovalna razdalja osi X: 4.000 mm, število osi: 3, This 3-axis TRUMPF Trumatic L 4030 was manufactured in 2006. It features a working area of 4000 mm x 2000 mm and a powerful 4000 W laser. The machine requires a 400 V power connection and has a total connected load of 88 kVA. If you are looking for a high-quality laser cutting system, you should consider the TRUMPF Trumatic L 4030 CO2 laser cutting machine we are offering for sale. Contact us for further details. • Working area: 4000 x 2000 mm • Power connection: 400 V / 50 Hz Crjdpfxoyu Nq To Apleb • Total connected load: 88 kVA • Control voltage: 24 V • Required fuse protection: 3 × 160 A • Compressed air connection: 7-10 bar • Nitrogen connection (N₂): 30 bar • Oxygen connection (O₂): 20 bar • Operating hours (NC): 84,196 • Operating hours (resonator / HP pump 1): 72,564 • Operating hours (beam on / HD pump 2): 30,904 • Included components: 2 replacement switch cabinets • Upgrades: Easy Filter Kit (installed 2023) • Dimensions (L x W x H): 11,500 x 6,000 x 2,000 mm • Total weight: with TLF laser: 16,000 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 54.221 h, številka stroja/vozila: A0150A0211, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, proizvajalec krmilnikov: Rexroth, model krmilnika: IndraMotion MTX, vrsta laserja: CO₂ laser, proizvajalec laserskih virov: Trumpf, model laserskega vira: TruFlow 2700, laserske ure: 11.836 h, laserska moč: 2.700 W, prebijalna sila: 22 t, najv. debelina pločevine: 8 mm, potovalna razdalja osi X: 2.540 mm, pomik osi Y: 1.370 mm, vrsta hlajenja: voda, priključek za stisnjen zrak: 8 letvica, skupna masa: 24.000 kg, leto zadnje generalne obnove: 2026, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hitroizmenjevalna naprava, hladilna enota, nožno daljinsko upravljanje, nujno zaustavitev, odsesavanje prahu, varnostna svetlobna zapora, We are offering this ready-to-operate Trumpf TruMatic 7000 K02 1300 laser punching machine, year of manufacture 2012. Operating hours: 54,221 h Laser hours: 39,018 h Laser ON: 11,836 h Punching force: 220 kN Laser power: 2,700 W Travel range (X): 2,500 mm Travel range (Y): 1,250 mm Cutting capacity (mild steel): 8 mm Cutting capacity (stainless steel): 8 mm Cutting capacity (aluminum): 6 mm Machine weight approx. 24,500 kg Dimensions: 8,000 x 6,750 x 2,330 mm Standard equipment: - Brush tables - Linear magazine for tool stations and clamps - 21 tool stations, 4 clamps - Foot switch for clamp operation - Flap for punched parts 500 x 500 mm incl. sensor - High-speed flap for laser parts 500 x 500 mm incl. sensor - Scrap container - ContourLine - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Knock-out cylinder for laser parts - Liftable laser cutting support - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - High-frequency excitation - Laser control TASC Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change system with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single tool holder with 360° rotation - Programmable stripper with adjustable pressure - Tool length compensation - Spray lubrication for punches - Punch slug extraction - Level monitoring for thread forming and tool lubrication Control system: - Open control based on Rexroth IndraMotion MTX - 15" TFT color display Crjdpfxsy Nbrgj Aplsb - Teleservice via internet - Automatic shutdown Data transmission: - USB port - RJ45 network connection Safety: - CE mark - Dual-beam light barriers - Hydraulic emergency stop - Bulging detection - Fill level calculation in the punching console Programming: - Advanced workshop programming Additional equipment: - Active die - MultiTool function - MultiBend function - MultiShear function - Thread forming function - Marking function - Deburring and roller technology function - Spray lubrication for die - Pressure compensation cylinder - Toolmaster with 70 tool slots - Conveyor belt for punching scrap incl. hopper - Vibration-damped base If you have any questions or need further information, feel free to send us a message or call us. The seller accepts no liability for typographical or data transmission errors. The machine's cosmetic and technical condition, along with wear, is consistent with its age; used machines are sold without any warranty.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, prebijalna sila: 15 t, skupna masa: 4.300 kg, največja dolžina izdelka: 3.800 mm, CNC punching machine from 1991. This TRUMPF TRUMATIC 120R offers a punching force of 15 tons and a maximum punch diameter of 38 mm. It provides a working area of 1000 x 2000 mm with repositioning and comes with a complete tool set. If you are looking for a high-quality punching machine, consider the TRUMPF TRUMATIC 120R that we are offering for sale. Contact us for further details on this machine. Crodpfx Aeymz Rcsplsb • Maximum sheet thickness: 4 mm • Maximum punch diameter: 38 mm • Working area without repositioning: 1000 x 1000 mm • Working area with repositioning: 1000 x 2000 mm • X/Y-axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool changer: 9 tool stations • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation including machine history included Additional equipment • Large set of tools • Two additional tables to extend the working area

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, laserska moč: 2.400 W, potovalna razdalja osi X: 3.085 mm, število osi: 2, Máquina de corte por láser de CO2 del año 2001. Esta TRUMPF TRUMATIC TC 600L Y1300 dispone de una fuerza de punzonado de 22 t y un grosor máximo de 8 mm. Ofrece un formato máximo de 3085 x 1370 mm en modo punzonado y una velocidad de avance de 90 m/min en el eje X. Si busca una instalación de corte por láser de alta calidad, considere la TRUMPF TRUMATIC TC 600L Y1300 que ofrecemos a la venta. Contáctenos para más detalles. • Estado: En buen estado general; completamente funcional; todavía en producción • Formato máximo (modo combinado): 2585 x 1280 mm • Formato máximo (modo láser): 3085 x 1280 mm • Formato máximo (modo punzonado): 3085 x 1370 mm • Horas de funcionamiento: 48.746 h • Horas de funcionamiento del rayo láser: 2.159 h • Fuerza de punzonado: 22 t • Espesor máximo: 8 mm • Fuente láser: TLF 2400W turbo • Velocidad de avance eje X: 90 m/min Crjdpfx Ajy Anhujplsb • Velocidad de avance eje Y: 60 m/min

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 44.973 h, laserska moč: 2.700 W, prebijalna sila: 22 t, delovno območje: 2.500 mm, Oprema: hladilna enota, varnostna svetlobna zapora, Description X Max. Working Area: 2585 mm Y Max. Working Area: 1280 mm Control: Siemens Sinumerik 840 D Laser Power: 2700 watts Crsdpfx Aotpguzepleb Beam-On Time: 6,054 hours Laser-On Time: 29,826 hours Operating Hours: 44,973 hours Standard Equipment: - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 positions for tools and clamping claws - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for repositioning - Sensor-monitored part chutes 500x500 mm for punching and laser station, ejector cylinder at the laser chute - Laser Unit: High-frequency excited CO2 laser TLF 2700W, vibration-isolated, integrated into the machine frame, incl. cooling unit and DIAS 3 laser control - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, distance control - Sinumerik 840D control, TFT color screen 10.4", user-friendly operation, online help, diagnostics functions, maintenance logbook, technology data, job tables, teleservice, 3.5" diskette drive, RJ45 network connection Safety: Multi-beam light curtains, hydraulic quick shutdown, extraction and compact dust collector, protective device against stray radiation at the cutting head + Laser TLF 2700 + Thread forming function + MultiTool function + Marking/fast embossing function + MultiBend function + Rolling technology function + Repositioning cylinder + Bulge detection + Chip conveyor Automation + SheetMaster + GripMaster + TrumaSort R4

Stanje: skoraj kot novo (rabljeno), Good part conveyor belts for TruMatic 7000 / 6000 Crsdpeu S Ny Tofx Aplsb Very good condition