Holzkraft Kso 200 F - Sofort Verfügbar - nakup rabljenega (47.892)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), največja višina reza: 200 mm, največja širina rezanja: 1.450 mm, premer žaginega lista: 550 mm, največja hitrost vrtenja: 4.800 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna masa: 1.280 kg, dolžina rezanja (maks.): 3.200 mm, višina reza z zareznim rezilom (max.): 200 mm, širina reza pri vzporednem vodilu: 140 mm, dolžina mize: 3.200 mm, Oprema: dozator, motorna zavora, Težka krožna žaga za rezanje plošč z napravo za predrez in Siemensovo krmilno enoto s tremi osmi Razstavna naprava s polno garancijo Odstranljiva upravljalna plošča s Siemensovo krmilno enoto in velikim 10-palčnim zaslonom na dotik Upravljanje višine/naklona žaginega lista in pozicioniranje paralelnega vodila prek upravljalne plošče Maksimalna višina reza 200 mm Naprava za predrez s posebnim pogonskim motorjem Glavni žagin list s pasovnim pogonom in vrtljaji 2800/3665/4800 min⁻¹ Crodpfevmfawjx Aahog Visoka lastna teža zagotavlja brez vibracij delovanje Velika iztegnjena miza z valjem za material Izvlečni aluminijast vzdolžni vodilni element s tremi zložljivimi vodili in digitalnim prikazom položaja Močan glavni motor s 7,5 kW, nameščen na robustnem okvirju iz litega železa Štirikrat ležajni drsnik za rezanje plošč z dvojnim valjčnim vozičkom iz eloksiranega aluminija z visoko torzijsko togostjo Večkratno zaklepanje na drsni mizi Serijsko opremljena z razširitvijo in podaljškom mize iz jeklene pločevine Velika nihajna zaščitna kapuca se lahko udobno dvigne s pomočjo plinske vzmeti Objemka za žagin list z enim hitrim sistemom, ki ne zahteva orodja Žaga za rezanje plošč je postavljena v našem razstavnem centru v Chemnitzu. Je nova in v neuporabljenem stanju. Z veseljem vam pomagamo pri transportu, montaži in usposabljanju.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 6 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, premer žaginega lista: 520 mm, izvrtina žagine plošče: 50 mm, Ponujamo rabljeno krožno žago GRAULE ZS 200 - F, izdelano leta 2003. Proizvajalec: GRAULE Model: ZS 200 - F Serijska številka: 2003/3-13 Leto izdelave: 2003 Premer žaginega lista: 520 mm Premer vpenjalne luknje: 50 mm Nazivna napetost: 400/230 V Nazivni tok: 6,4 A Crsdpfszx N T Iex Aahjg Frekvenca: 50 Hz Če imate kakršna koli vprašanja ali potrebujete več informacij, nam lahko pošljete sporočilo ali nas pokličete.

Stanje: novo, - New - with tiltable sanding unit and oscillating sanding belt, F-version for veneer sanding Description: - Sanding unit tiltable via lever up to 45° - Machine frame made of welded steel ensures high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate geared motor for improved sanding results - Oscillation can be switched on/off as needed - Sanding shoe with graphite coating for increased belt service life - Height-adjustable sanding table to utilize the full width of the sanding belt - Height-adjustable auxiliary table with extraction for sanding radii - Spring-loaded belt tension automatically compensates for differences in belt length - With dual extraction ports - Extendable roller table extension - With rubberized sanding roller - Veneer edge sanding device with contact shoe featuring fine adjustment, relieving rollers, and stop rulers - With grooved infeed ruler for veneer overhangs - Quick changeover from veneer edge to solid wood sanding possible Technical Data: Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Extraction Connection Extraction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Longitudinal table height adjustment 230 mm Cross table minimum height 720 mm Crjdevwgbwjpfx Aaheg Electrical Data Connection voltage 400 V Network frequency 50 Hz Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Item no. 5363001

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Edge Sanding Machine KSO 150 F PRO NEW Scope of delivery: Sanding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x sanding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, Tool kit, Mitre fence Sanding unit tiltable by hand crank, Machine stand made of welded steel, Oscillating sanding belt with separate gear motor, Oscillation can be switched on as required, Sanding platen with graphite coating, Height-adjustable sanding table, Auxiliary table with extraction ports, Sanding sleeve fixture with integrated work table, Adjustable stops 2 extraction ports ø100 mm, Table size: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Sanding belt length 2640 mm, width 150 mm, Belt speed 14 m/s, Sanding area length 800 mm, width 150 mm, Oscillation stroke 15 mm, Sanding unit tilting range 0-45° Machine dimensions 1750 x 1050 x 1200 mm, Weight 310 kg Codpfxoyxqtfs Aahjrg LIST PRICE RRP €11,050 Available at short notice Transport available at extra cost!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, številka stroja/vozila: HMD-G-80-1000, Na voljo imam takoj dostopno, skoraj novo batno-membransko črpalko Abel, tip HMD-G-80-1000, litoželezna izvedba, letnik 2017, pravkar popolnoma obnovljena in na novo prebarvana. Maksimalna zmogljivost: 70 m³/h, maksimalni tlak: 15 bar, motor z močjo 30 kW, popolnoma opremljena z novo krmilno omaro, frekvenčnim pretvornikom in tlačnim senzorjem. Zelo primerna za dolge komorne filtrske stiskalnice 1200 ali 1500. Lokacija: 58762 Altena. Le postavite, priključite in začnite uporabljati… Cedpfxeyxxmge Aaherg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, IMMEDIATELY AVAILABLE – Chamber filter press by Häcker with supporting frame and 50 m³/h Abel pump for sale. Plate size: 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake thickness, capacity approx. 2700 liters, automatic plate shifting, open discharge into double-sided filtrate trough, press is ready for operation directly after installation. Abel pump was serviced by the manufacturer shortly before decommissioning. Galvanized support frame with staircase access. Located near Würzburg. Cjdpforunu Ijx Aaherg

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 3000 mm Table size: 960 mm x 352 mm Crodpfjgtdpusx Aaheg Auxiliary table: 330 mm x 330 mm Sanding drum diameter: 60 mm / 100 mm / 120 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Crodpfxeff Hdpj Aahjg Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2026, Heavy-duty machine stand ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation via separate geared motor Oscillation can be activated as required Veneer edge sanding device with fine adjustment as standard Grooved infeed fence for sanding veneer overhangs Quick conversion from veneer to solid wood sanding Height-adjustable sanding table for utilizing the entire sanding belt width Height adjustment of the sanding table and sanding unit swiveling via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip extraction through extraction at the unit and cross table Automatic compensation of belt length differences by spring-loaded belt tension Dimensions and weights Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust extraction connection Extraction port diameter 120 mm Drive power Oscillation motor 0.25 kW Work table(s) Work table length 960 mm Work table width 352 mm Crodpfx Aoff Ed Toaheg Work table height adjustment 210 mm Cross table height min. 730 mm Electrical data Total connected load 3 kW Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit Sanding belt length 3000 mm Sanding belt width 150 mm Belt speed(s) 20 m/s Sanding area length 1050 mm Sanding area width 220 mm Swivel range 0 – 45 ° Oscillation stroke 20 mm Availability: Short notice

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Crsdpfx Aajqlck Nehog Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, A collection of three of the most advanced CNC plasma cutting machines. Thanks to its user-friendly software, the Swift-Cut Pro series ensures precise cutting at the highest speeds with minimal investment. The Swift-Cut Pro range is easy to operate, quick to learn, and excellently supported by outstanding customer service. The Swift-Cut Pro series is the solution for cost-effective in-house metal cutting. You are welcome to arrange a demonstration appointment with us. Credpfogkgugex Aahog

Stanje: novo, Leto izdelave: 2023, laserska moč: 8.000 W, Fibre laser machine HLF available from stock, ready for immediate delivery. An identical machine can be tested under power at our facility. Performance: 8kW Sheet size: 3000 x 1500mm automatic shuttle table incl. ball transfer system for scratch-free workpiece positioning Siemens touchscreen control with LAN/USB Siemens drives Precitec Auto Focus Procutter cutting head sheet metal measurement IPG resonator with 8kW / alternatively MAX Photonics Credpfx Asqgcwtjahsg small parts conveyor belt includes: Warranty CAD / CAM software Commissioning Delivery (within Germany) Donaldson extraction unit Training available This machine is a stock machine and therefore available at short notice. We already have 300+ similar and identical machines operating under power in Germany and throughout Europe. Reference visits to users are possible at any time. Contact us now!

Stanje: novo, Leto izdelave: 2026, Hebrock F 5 Če želite maksimalno učinkovitost, je Hebrock F 5 rešitev za obdelavo robov v zahtevnem obrtnem podjetju. F 5 zagotavlja obdelavo robov v vseh korakih, saj je opremljen z vsemi komponentami, ki jih potrebujete za vaše zahteve: strojna freza za utore, krožna žaga, frezalna glava, večradijna strgalna rezila, kotna freza, ploščata strgalna rezila, postaja za čiščenje. Za še večjo prilagodljivost na poti do popolnega zaključka je mogoče F 5 dodatno opremiti s praktičnimi večradijskimi strgalnimi rezili. maks. debelina roba: 3 mm maks. debelina obdelovanca: 50 mm Pripravljen za uporabo v 3,5 min Oprema: Hebrock F5 Next - 10 m/min Stroj za obdelavo robov F5 Next S krmiljenjem PLC (vključno s zaslonom na dotik) in s sistemom za nanašanje taljenega lepila na obdelovanec za robne materiale do 3 mm; strojna freza za utore (vključno z diamantnim orodjem) do 2 mm globine reza, brez vzdrževanja rezervoar za lepilo s pripravljenim sistemom za menjavo rezervoarja, vključno z napravo za izlivanje lepila, visokofrekvenčna krožna žaga (približno 12000 vrt/min), visokofrekvenčna frezalna postaja (približno 12000 vrt/min) z ločeno pnevmatsko nastavitvijo freze in frezo z menjalnimi ploščami (kombinirana izvedba), kotna freza, večradijsko strgalno rezilo, ploščato strgalno rezilo (vključno s pnevmatskim sistemom za dvig), postaja za čiščenje, robusten verižni pogon, dvojni valjčni zgornji pritisk z krogličnimi ležaji, okno za pregled na hrbtni strani stroja, izvlečni podstavek za obdelovanec, napredovanje približno 10 m/min. Hebrock F5 F5/08/4 Priprava za hitro menjavo kotne freze F5/08/5 dodatni menjalni motor za kotno frezo z orodjem F5/09/4 Večradijsko strgalno rezilo (R1/R2) F5/10 Podvozje F5/14 Dodatni menjalni rezervoar Crodjlht Hwjpfx Aahog F5/24/1 Razpršilna naprava za ločilno sredstvo F5/24/2 Razpršilna naprava za čistilno sredstvo F5/25 Razpršilna naprava za obdelavo roba F5/27 Držalo za frezo in večradijsko strgalno rezilo F6/28 Razpršilno nanašanje za teksturno obdelavo F5/30 Pnevmatska 3-točkovna nastavitev (freza za robove, faze in izravnavanje) F5/31 Spajanje do 50 mm F5/32 LED osvelitev Lokacija: Na zalogi, 54634 Bitburg - na voljo takoj -

Stanje: novo, Leto izdelave: 2024, The Uniq series forms the genuine foundation of our product range, incorporating all the features that have earned Kündig’s edge sanding machine its reputation on the market as a robust and versatile precision instrument. A key component of its extremely heavy-duty construction is the motorized oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and motorized tilting capability of up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The heart of all our edge sanders is the sanding aggregate, which boasts a range of intelligent features and properties. Unlike conventional systems that oscillate by tilting the belt rollers, our machines move the entire sanding unit up and down. Both the oscillation stroke and oscillation range can be easily set at the push of a button. Thanks to flexible settings and the long oscillation path, the sanding belts can be used optimally across their entire width without laborious adjustments to the table height. The oscillation mechanism is driven by a separate motor. Tilting the sanding aggregate is also done conveniently using a rotary switch and its own dedicated motor. The unit can be tilted between 90° and 45°. Thanks to a well-designed swiveling mechanism, full oscillation is available at all times, and double-sided sanding is possible—even simultaneously. Different table heights for the front and rear sanding stations ensure that the belt isn’t used at the same height on both sides. Furthermore, the combination of swiveling mechanism and varying table heights guarantees that the gap between the sanding aggregate and the worktable remains minimal at any tilt angle. Changing the sanding belt is also effortless and takes only seconds. The Four Sanding Stations 1. Sanding Station: “Veneer Side” The front sanding station is designed for precise calibration of materials and functions like a jointer. The infeed fence can be adjusted via a handwheel to set the depth of cut with a precision of tenths of a millimeter. Important: The fence is not tilted. Infeed fence, sanding pad, and outfeed fence are always parallel to each other, effectively preventing rounding of workpieces. Fine adjustment of the sanding pad for grit compensation and for zero positioning between fences and pad is done using a handwheel. The heavy-duty work table on this side is equipped with sliding surfaces. Credpsfig Rwofx Aahjg 2. Sanding Station: “Solid Wood Side” This station is ideal for sanding flat, angled, chamfered, or externally radiused workpieces. Here, too, the entire sanding aggregate oscillates. The belt runs the full width over a cool-running graphite surface. A mitre fence is also included on the solid wood side. Included Accessories: – Half-round table – Additional table with sanding rollers Location: From stock, 54634 Bitburg – Immediately available –

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV Crodjqlckpspfx Aaheg • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Credpeu I R Utjfx Aahsg Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: novo, Leto izdelave: 2025, Holzkraft Combined Surface and Thickness Planer - Immediately available - Ideal for demanding craftsmen and joiners The extra-long, single-piece surfacing tables allow easy straightening of workpieces Working tables are made of cast iron for durability and long-term flatness Rearward, simultaneously opening surfacing tables with spring assist for fast and convenient changeover Thanks to the fixed-mounted extraction hood, there is no need to change the extraction hose during setup, saving valuable work time Helical steel infeed roller ensures constant and even wood feed Rubber outfeed roller in the thicknessing outfeed for consistent wood extraction Material feed with four selectable speeds Height adjustment of the thicknessing table via handwheel with integrated height scale DIGITAL version: with electric thickness table height adjustment and digital readout On/off switch within operator's reach Powerful industrial motor High machine weight provides maximum precision and smooth operation Preparing for slot mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2,250 mm Width/depth approx. 1,370 mm Weight approx. 695 kg Surfacing Total table length 2,250 mm Max. cutting depth 5 mm Fence length 1,200 mm Fence height 150 mm Dust extraction connection Thicknesser extraction port diameter 1 x 120 mm Drive performance Main motor 7 kW Setup Information Space requirement length 2,250 mm Space requirement width/depth 1,440 mm Notes on space requirement: dimensions account for max travel or working lengths. Thicknessing Thicknessing table length 850 mm Thicknessing table width 520 mm Codpfx Aoih Dxdoahorg Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Max. cutting depth 5 mm Electrical data Supply voltage 400 V Phases 3-phase Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of knives 4 Speed 5,000 rpm Max. planing width 520 mm Feed Speed 5 / 8 / 12 / 18 m/min Location: From stock 54634 Bitburg - Immediately available -

Stanje: novo, - new - Special Price Description: Crsdpsvxr Rgefx Aaheg - Saw blade tilt and height adjustment are manual - Max. cutting height 200 mm - Scoring unit with separate drive motor - Main saw blade with belt drive and speeds of 2800/3665/4800 rpm - High dead weight ensures vibration-free operation - Large extension table with material roller - Parallel fence with round bar guiding system - Extendable aluminium rip fence with two folding stops - Powerful 7.5 kW main motor mounted on a robust cast iron frame - Fourfold bearing format sliding table with double carriage made of anodized aluminium for high torsional rigidity - Multiple locking positions on sliding table - Standard with table width extension and table length extension made from sheet steel - Large pivoting guard hood easily raised by means of a gas pressure spring - Tool-free saw blade quick-release clamping via Rapid system Technical Data: Dimensions and Weights Length approx. 3386 mm Height approx. 1330 mm Width/Depth approx. 3703 mm Weight approx. 1102 kg Extraction Connection Extraction port diameter 120 mm Saw blade guard extraction port diameter 80 mm Electrical Data Connection voltage 400 V Installed power 8.3 kW Motor speed 2800 rpm Mains frequency 50 Hz Output power 7.5 kW Sliding Table and Table Format sliding table length 3200 mm Format sliding table height 890 mm Table width 685 mm Format sliding table width 416 mm Table length 1255 mm Table height 890 mm Noise Emission Sound pressure level 96.5 dB(A) Circular Saw Unit Cutting width with parallel fence 1450 mm Saw blade tilt 90 – 45° Max. cutting height at 45° 140 mm Saw blade speed 2800/3665/4800 rpm Max. cross-cut length left of the blade 3200 mm Max. cutting height at 90° 200 mm Saw blade diameter 550 mm Scoring Unit Scoring blade diameter 120 – 130 mm Scoring blade speed 8000 rpm Art.-No.: 5200550

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Csdpfopgkmwjx Aahjrg Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Credpfx Aaoff Efaohsg Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Minimum working length: 210 mm Maximum cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 phases Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Solid German engineering Table milling machine with a fixed, single-sided tilting spindle for a tilting range from -5° to +45.5° Positioning control for height and tilt adjustment with zero set for height and incremental travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Left- and right-hand rotation Quick-release cutter clamping system Finely planed cast iron table with rigid frame support Control panel mounted at the bottom on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum split plates Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Milling spindle 30 mm, fixed/non-interchangeable CE compliant GS tested Codpfx Aer Ig H Teahsrg Table size: 1100 x 760 mm Table height: 870 mm Milling spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light grey and RAL 5000 Violet blue Net weight: approx. 800 kg Features: Control panel on top Tilting ±45° Motor 7.5 kW Centrex Extendable frame support Location: in stock, 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, A thoroughly reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium extraction volumes, or an ideal complement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter surface area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional: type-tested rotary valve (FSA) • Tested return flow damper • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3 Ph • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h Codpfx Aashkzt Nehorg • Negative pressure at rated flow: 2,543 Pa • Inlet diameter: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection container volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: Available from stock, 54634 Bitburg - Immediately available – in stock Subject to prior sale

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, IMMEDIATELY AVAILABLE Studer S20-2 – Mechanically Overhauled Grinding length: 400 mm Centre height: 100 mm Table swivelling: 30° Spindle bore diameter: 127 mm Grinding wheel dimensions: 350x32 mm Headstock taper: MT4 (dead and live centre) Tailstock taper: MT2 Codofg Tbrspfx Aaherg Quill stroke: 20 mm Workpiece weight: 20 kg Tailstock with manual cylinder error correction Further possible options: - Glass scales on X- and Z-axis - Internal grinding device - Grinding wheel flange - LED spotlight with flexible arm - Coolant system - Safety device

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Cjdpfx Aaov Erkaohorg Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2025, Martin panel saw T 77 – new stock machine – Top Features – Double-sided tilting – Equipment: - T 7710/2-a PREX saw unit, double-sided tilting - T 7725/2-a Cutting height 205 mm - T 7720/2-a Infinitely variable drive power 5.5 kW - T 7730/4-a Sliding table length 3.3 m - T 7735/3-a Cutting width 1350 mm - T 7743-a Electronically controlled parallel fence, can be lowered in end position - T 7755-a 3-axis scoring unit - T 7757-a Scorer lighting Safe Light - T 777572-a RadioCompens angle cutting system with continuous fence Crodpsw D T Dksfx Aahjg - T 7780/1-a Rear table extension 610 x 860 mm - T 7792/2-a Sensor monitoring for side-shiftable safety guard, 2 x 45 degrees - T 7704/2-a ConnectPad 12.9" / 13" - T 7704/20-a OtterBox Defender Case - T 7706/1-a ConnectApp at Classic operation level Location: ex stock 54634 Bitburg - available immediately -