Borema Umwelttechnik Ag Drobljenje / Stiskalnica Za Pet Plastenke nakup rabljenega (86.253)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Cantù
455 km
Stiskalnica za furnir
ITALPRESSES/2
Pokliči
Stanje: dober (rabljeno), Hidravlična hladna stiskalnica za pohištvo, plošče, pohištvo po meri, vrata, kuhinje, kompozitne materiale in različne druge namene.
Tehnične specifikacije:
Dimenzije plošče: 2500 x 1000 mm
Število cilindrov: 2
Odpiranje: 400 mm
Tlačna sila: 25 ton
Hedpfxoy T Hfte Af Tsn
Motor: 2 KM
Skupne dimenzije: 2850 x 1150 x 1600 mm (višina)
Mali oglas
Isny im Allgäu
414 km
Stiskalnica za furnir
JoosHP 65
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 15,4 kW (20,94 KM), hod: 360 mm, širina mize: 1.100 mm, dolžina mize: 2.500 mm, skupna dolžina: 2.900 mm, skupna širina: 1.300 mm, skupna višina: 1.900 mm, skupna masa: 3.200 kg, leto zadnje generalne obnove: 2015, Ponujamo to zelo dobro furnirsko stiskalnico Joos HP 65, leto izdelave ni znano.
Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.
Hedpfxsy U Tw Ee Af Tjn
Mali oglas
Hofkirchen im Traunkreis
227 km
Lisec stiskalnica za polnjenje plina FPS-36/25U2T
LisecFPS-36/25U2T
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Lisec plinska polnilna stiskalnica za maksimalne dimenzije elementov 3500 x 2500 mm, leto izdelave 2001, sestavljena iz:
- RTVN-15/25ST, podaljšek za merilno cono, tip z jermenom, leto izdelave 2001
- RTVN-15/25MZ, merilna cona za plinsko polnilno stiskalnico, tip z jermenom, z merjenjem dolžine in višine ter merjenjem debeline stekla in okvirja, leto izdelave 2001
Hjdjy Swfzspfx Af Tsn
- FPS-36/25U2T, polnilna stiskalnica za argon, nastavitev pritisnih plošč preko vreten, možna tudi polnitev modelov, na stroju se lahko obdelujejo tudi 4-stranski stopničasti elementi (spodaj 50 mm, spredaj, zgoraj in zadaj 130 mm), leto izdelave 2001
- RTVN-15/25ST, izhodni transportni trak stiskalnice, tip z valji, leto izdelave 2001
Stroj je v brezhibnem delovnem stanju in si ga je po dogovoru mogoče ogledati v našem skladišču strojev.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Plzeň-město
418 km
Stiskalnica za ogrodja
GannomatCONCEPT ECO
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 110 789, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, - Lamelna korpusna stiskalnica
- Delovno območje:
- Širina od 150 do 2.500 mm, višina od 150 do 1.400 mm; globina 700 mm;
- Moč je nastavljiva = 1000/1500/1800 daN (kg)
- Timer = samodejno odpiranje po preteku nastavljenega časa
- Teža: ca. 1800 kg
- Zelo dobro stanje, vse deluje
- Možen preizkus delovanja
Hjdpfoy Uxzvsx Af Tjn
Mali oglas
Nemčija
614 km
Drobilnik za PET - granulator
Nuga - StadlerCentriCut 44sr
Pokliči
Leto izdelave: 2012, stanje: rabljeno, Technical Details:
Operating hours: approx. 700 h
Number of rotor knife holders: 5
Number of stator knife holders: 4
Rotor diameter: 440 mm
Material: PET
Control voltage: 24 VDC
Granulator (Shredder)
This plastic granulator is designed for industrial use.
Application: Size reduction of all types of plastics, e.g. ABS, POM, PA6, PE, PP, PG, and PET
The system consists of a granulator with conveyor belts and a bottle bunker.
Material is fed into the bunker via the feed conveyor.
Hedpfou Nw Ebsx Af Tsn
Bunker 20m² V2A, complete with 7.5 kW gear motor.
The discharge screw is activated by the granulator control unit.
Bunker volume approx. 20 m³, HxWxD: 4400x3300x3300 mm, weight approx. 27.0 t
Bunker with discharge unit
Granulator CentriCut 44SR 55 kW, granulator 55 kW (50Hz, 400Volt), and feed screw conveyor 55 kW (50Hz, 400Volt)
Cutting chamber: rotor knife length 272 mm, weight approx. 2.0 t
Conveyor belt NT9, belt length 3500 mm, usable belt width 416 mm (side guide height 60 mm, cleat height 60 mm, cleat spacing approx. 500 mm), total length 3550 mm, total width 780 mm, total height 2350 mm, weight 250 kg
Sound insulation LxWxH: 2700x2300x2500 mm, weight 1.3 t
Tunnel metal detector 600 is integrated on the control side in the CentriCut granulator, scanning width 600 mm, passage width 840 mm, passage height 400 mm, weight approx. 150 kg
The system is available for sale, ready for transport. The line is not assembled and will not be set up.
This information is provided without obligation.
Mali oglas
Nemčija
614 km
Hladna stiskalnica za oblikovanje
KUHNE MASCHINENBAUKEPK-1
Pokliči
Stanje: rabljeno, Tehnične podrobnosti:
Dolžina stebla: maks. 30 mm
Zmogljivost: 600 kos/min
Največji premer žice: 5 mm
Delovno območje: 30 mm
Dimenzije krmilne omarice DxŠxV: 1,45x0,55x2,1 m
Dimenzije stroja: 2,95x1,5x2,15 m
Dimenzije odvijalnika: 1,15x1,15x1,15 m
Mehanska stiskalnica za hladno preoblikovanje
Za proizvodnjo zakovic, verižnih zatičev, zatičev ali posebnih izdelkov. (BREZ VIJAKOV po navedbah proizvajalca)
Naprava je posebna izvedba in neuporabljena (kot nova).
Hjdju Nfrcopfx Af Tjn
Pribor:
- odvijalnik
- navodila za uporabo
Stroj je možno prikazati v obratovanju.
i.D.
Mali oglas
Bretzfeld
536 km
Stiskalnica za furnir
JOOSunbekannt
Pokliči
Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm
Odpiralna širina: 300 mm
Število etaž: 1 kos
Hjdpfx Aey Ty E Tef Tsn
Teža stroja ca. 3 t
Leto izdelave: neznano
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 180
Pokliči
Stanje: novo, Leto izdelave: 2026, Availability upon request
Very robust machine with high pressing force
- also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size.
Our best-selling briquetting press series
+ Proven, simple technology, ensuring extremely low susceptibility to failure
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in operation with satisfied customers
+ Excellent value for money
Optional demonstration cooling unit surcharge: + €4,980 net
(can also be retrofitted later)
* Cools the press clamp (important from 4 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular operation exceeding 4 hours continuously
Commodity code: 84793010
Briquette diameter: 70 mm
Front sleeve: 125 mm
Max. briquetting stroke: 100 mm
Optimal briquetting stroke: 80 mm
Capacity (material-dependent): up to 150 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor output: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2,095 mm
Width: 1,300 mm
*with large chamber 1,600 mm
Height: 1,700 mm
Weight: 1,250 kg
Oil volume: 220 liters
Silo diameter: 1,200 mm
Silo capacity: approx. 1 m³
Pump: 75 liters
Hydraulic pre-compressor
Press clamp cooling option: yes, with optional coolable press clamp
Hydraulic oil cooling option: yes
Cooling of press clamp and hydraulic oil possible with optional cooling unit
Level monitoring option: yes
Continuous strand briquette option: yes (material-dependent)
Enlarged filling slider option: yes, with optional enlarged filling slider
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Installation temperature: heated room with at least +5°C
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur
Hedpfxjd Nm Sis Af Ten
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP 60
Pokliči
Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice.
+ Proven, simple technology for extremely low failure rates
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Outstanding price-performance ratio
Optional extras (available at additional cost):
*Surcharge for fill level sensor, enabling automatic operation:
+ €995 net
*Surcharge for large pre-compression chamber + €970
(Recommended for very light materials such as straw, increases machine width by 13 cm)
Briquette diameter: 50 mm
Front bushing: 50 mm
Max. briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput (material dependent): up to 60 kg/h*
*Depending on bulk density
*Based on a bulk density of 200 kg/m³
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Hedpfx Asgl Nlmof Tjn
Length: 1,680 mm
Width: 1,100 mm
Height: 1,500 mm
Weight: 680 kg
Oil volume: 110 liters
Silo diameter: 1,000 mm
Silo capacity: approx. 0.7 m³
Pump output: 37 liters
Hydraulic pre-compressor
Press tongs cooling option: No
Hydraulic oil cooling option: Yes
Fill level monitoring option: Yes
CE compliant
Raw material requirements:
- Moisture content (atro) must be between at least 6% and max. 18%
- Maximum chip length 15 mm
- Installation temperature: Tempered room, at least +5°C
- Customer must provide protection against hydraulic oil loss
- Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
mütek630 AL
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net
One machine is currently available for immediate delivery.
The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts.
Included features:
+ Optimized cutter geometry
+ Customized pusher control
+ Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit)
Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Knives: 40x40 mm, multiple rotatable
Rotor diameter: 260 mm
Control: Omron PLC
Cutting unit opening: 600 x 800 mm
Hopper volume: approx. 0.6 m³
Hydraulically operated pusher
Screen perforation as desired (15 - 40 mm)
Extraction port Ø 160 mm
Weight: approx. 1,300 kg
Hjdpsgmh H Tjfx Af Tsn
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
The following options are available at an extra charge:
- Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net
- Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net
- Overband magnet: +€6,980 net
- Conveyor belt and overband magnet control: +€2,750 net
(Start and stop synchronized with the shredder)
We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
mütek SystemtechnikMGP 60
Pokliči
Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj!
Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa
Hodev Rpxlepfx Af Tsn
Zmogljivost: do največ 60 kg/h
Briket: 50 mm valjaste oblike
Motor: 5,5 kW
Dimenzije: 1.900 x 1.350 x 1.410 mm
Teža: pribl. 860 kg.
Zahteve:
Izhodni material idealno krajši od 25 mm dolžine ostružkov
Vsebnost vlage 6–12 % ATRO
Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd.
Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.
Mali oglas
Neckartailfingen
511 km
Briketna stiskalnica Briketna stiskalnica za aluminij
mütekMPP NEM 300
Pokliči
Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months
---
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continual development, and expertise
+ Several hundred machines in operation with satisfied customers
+ Excellent price-performance ratio
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material.
The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette.
Advantages of briquette production include:
• Volume reduction of up to 90%
• Emulsion recovery
• Cost savings in storage and transport
• Cost-effective disposal
• Profitable sale
Hsdpfx Aochqxxof Tsn
--
Briquetting Press NEM 300
Throughput approx. up to 200 kg per hour (highly depending on material).
- In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion.
- In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion.
Technical specifications:
Motor: 7.5 kW (+ 0.55 kW on the cooler)
400 Volt / 50 Hz / 3-phase
Front bushing: 125 mm
Max. briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Pump: 80 liters
Storage hopper approx. 0.5 m³ capacity (extendable)
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMPP 280
Pokliči
Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement
Very robust machine with high pressing force
- Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible.
Our bestselling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development, and expertise
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio
Surcharge for cooling unit + €4,995 net (can also be retrofitted later)
* Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause)
Briquette diameter: 80 mm
Front bush: 125 mm
Hedpfoxfwdsx Af Tsn
Maximum briquette stroke: 100 mm
Optimal briquette stroke: 80 mm
Throughput (depending on material): up to 200 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 9.2 kW
400 Volt / 50 Hz / 3-phase
Length: 2095 mm
Width: 1300 mm
Height: 1700 mm
Weight: 1250 kg
Oil volume: 220 liters
Silo diameter: 1200 mm
Silo capacity: approx. 1 cbm
Pump: 75 liters
Hydraulic pre-compressor
Press jaw cooling option: yes, with special accessory coolable press jaw
Hydraulic oil cooling option: yes
Cooling of press jaw and hydraulic oil with cooling unit (special accessory)
Fill level monitoring option: yes
Continuous briquette option: yes (material dependent)
Enlarged filling slider option: yes, with special accessory enlarged filling slider
CE compliant
Requirements for raw material:
- The moisture content (atro) must be at least 6% and not exceed 18%
- Maximum chip length 20 mm
- Installation temperature: heated environment, at least +5°C
- The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
R 200
Pokliči
Stanje: dober (rabljeno), Good, used condition
Main motor: 11 kW
Throughput up to max. 200 kg/h
Hodpfet Hxudex Af Tjn
Year of manufacture: 12/2008 / Technically inspected in 01/2025
Briquette size: 150x60 mm
*Used machine, sold as seen
Functionality guaranteed upon handover
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
mütekMRZ 630 - 18,5 kW
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Demonstration machine with approx. 9 operating hours
Another machine available immediately (ex works Neckartailfingen)
*Options available at extra cost – see below
Included:
+ Profile rotor for higher throughput performance
We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos.
Motor: 18.5 kW; 400 V - 50 Hz - 3 ph
Blades: 15 pieces, reversible multiple times,
Optional double blade row + €995 net
Rotor diameter: 260 mm
Hedpfx Afeb Ny Eys Tjn
Control system: Siemens S7-1200 PLC
Cutting chamber opening 630 x 820 mm
Hopper volume approx. 0.6 cbm
Hydraulically operated pusher
Screen perforation of your choice (10–40 mm)
Extraction port Ø 160 mm
Weight approx. 1,300 kg
Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% dry basis.
Standard equipment includes:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start
- High-speed hydraulics
- Automatic shut-off when rotor idling
- Rotor speed 70–90 rpm for high throughput
- Timed control to avoid idle times
- Performance-enhancing step control for the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
Optional shredder accessories for extra charge:
- Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net
- Eco Rings: + €1,980 net
(recommended for more than 20% hardwood)
- Double blade row + €995 net
- Special scraper + €990 net
(recommended for shredding veneer or paper, or materials less than 3 mm in thickness)
- Angled conveyor belt + €8,770 net
Angle: adjustable 0–60 degrees
Discharge height: approx. 2,000 mm
- Automatic overbelt magnet + €5,980 net
- Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content)
- Conveyor and overbelt magnet control + €2,750 net
(Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net
Raw material requirements:
- The moisture content (dry basis) must be below 30%
- Installation temperature: heated room with at least +5°C
- Metals and mineral contaminants such as sand, stones, etc., cause increased wear
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje plastike
mütek630 K
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction
Base machine from €24,990 net
Ideally suited for shredding:
- Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc.
- Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET
Included:
- Special rotor with embedded knives (reduced torque loading)
- Minimal cutting gap between rotor and counter-knife
Motor: 18.5 kW; 400 V - 50 Hz - 3-phase
Control: PLC
Cutting chamber opening (top): 600 x 800 mm
Input material should be max. approx. 500 x 500 mm (height less critical)
Hydraulically operated pusher
Screen perforation as desired (25–40 mm)
For plastics, coarser screens are recommended (30–40 mm)
*For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended
Extraction nozzle Ø 160 mm
Weight approx. 1,300 kg
Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm
Additional options (at extra charge):
- Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net
- Inclined conveyor (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder)
- Alternatively, manual start/stop on the conveyor belt + €595 net
Raw material requirements:
- Moisture content (atro) must be below 25%
- Metals and mineral contamination such as sand, stones, etc. result in increased wear.
We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos.
---
*Only for brittle plastics with medium hardness.
*Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability.
---
Optionally, larger machines are available:
Hedpfx Aod H R Sxef Tsn
Base machine: Shredder MGZ 830 K-S – 18.5 kW
Cutting chamber opening (top): 800 x 1,000 mm
Input material should be max. approx. 720 x 700 mm (height less critical)
From €39,995 net *Options upon request
Base machine: Shredder MGZ 1030 K-S – 22 kW
Cutting chamber opening (top): 1,000 x 1,000 mm
Input material should be max. approx. 900 x 700 mm (height less critical)
From €49,975 net *Options upon request
Base machine: Shredder MGZ 1330 K-S – 37 kW
Cutting chamber opening (top): 1,300 x 1,200 mm
Input material should be max. approx. 1,200 x 700 mm (height less critical)
From €79,975 net *Options upon request
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price
Machine available immediately (ex works Neckartailfingen)
Demonstration unit
Your benefits:
+ Very robust, simple technology
+ Excellent price/performance ratio
+ Suitable for continuous operation
+ Proven, well-functioning and established machine over many years
Includes control cabinet with timer operation
The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically.
Technical data:
Briquette dimensions: 30/35 mm (square)
Briquette length: 5–35 mm (depending on material)
Throughput capacity: up to max. 25 kg/h (depending on material)
Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H)
Hjdofci D Aopfx Af Ten
Machine weight: approx. 250 kg
Silo capacity: approx. 250 litres
Motor: 2.2 kW, 400 V – 50 Hz
Noise emission: 62 dB
Raw material requirements:
• Wood shavings and dust less than 15 mm in length
• Moisture content less than 15% ATRO
• Sand, stones, metals, and minerals increase wear
---
Options at extra cost:
-Timer function + €490 net
Machine is started manually and switches off automatically after the set time X.
-Fill level sensor for automatic operation + €1,450 net
Press starts and stops automatically
* NEW!!! Now also available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €690 net (delivery time approx. 8 weeks)
---
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
mütekMGZ 1330
Pokliči
Stanje: novo, Leto izdelave: 2026, Delivery time:
Approx. 4-5 months
Your advantages:
+ Extremely large cutting chamber opening: 1300 x 1200 mm
+ Special rotor suitable for both hard and soft wood
+ Energy efficient and powerful with 37 kW start-up output
Technical specifications:
Color: grey / blue
Feed opening on top (mm): 1,300 x 1,200
Hopper volume (cbm): 1.6 m³
Rotor diameter (mm): 368
Rotor speed (rpm): 65 – 125
Power requirement (kW): 37
Screen perforation (mm): 10 – 40; selectable
Tools: 37/70 knives
Extraction port diameter (mm): 200 mm
Dimensions: 2430 x 2410 x 1735 mm (L x W x H)
Approx. weight (kg): 3,500
Hjdpjgbkkrefx Af Ton
Options available at extra cost:
- Second row of knives, for up to 30% higher throughput
- High-speed hydraulics, for increased throughput
- Conveyor belt discharge preparation
- Conveyor belt
- Overband magnet HAWK-EYE
*To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost.
---
Slider extension option *available at extra cost
Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required.
*Larger machines available upon request.
---
Raw material requirements:
- Moisture content (oven-dry) must be below 20%
- The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütek SystemtechnikMPP NEM 900
Pokliči
Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below
* Production time approx. +/- 6 months
The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%.
The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material.
The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected.
The more homogeneous the input material, the more uniform the briquette lengths.
Advantages of briquette production include:
- Volume reduction by up to 90%
- Emulsion recovery
- Cost savings on storage and transport
- Economical disposal
- Profitable resale
Briquetting Press NEM 900:
For briquetting aluminum chips
Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm)
Last test with aluminum chips < 18 mm: approx. 260 kg/h
*More details available after a free test with your material.
Briquette diameter: Ø 70 mm
Optimal briquette length: 70 mm
Technical data:
Total connected load: approx. 31 kW
Continuous operation: approx. 22 kW
400 Volt / 50 Hz / 3-phase
Pump: 120 + 60 litres per minute
Silo: 1 m³
Silo diameter: 1200 mm
Including agitator
Oil tank: 600 litres
Hsdpfx Ajgfm Ryof Tsn
Dimensions (LxWxH): 2500 x 1700 x 1730 mm
Weight: 2250 kg
Hydraulic pre-compaction via ram
Main press cylinder
Vertical cylinder
Prepared for connection to a cooling unit
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
mütekMHB; MHZ
Pokliči
Stanje: novo, Leto izdelave: 2026, Consisting of bale breaker for large bales type MHB and straw shredder type MHZ
1) Bale Breaker MHB:
Special price from €22,975 net (approx. 15 weeks production time)
Suitable for round or square bales.
Includes frequency converter (FU) – this controls the speed of the scraper floor.
The bales are placed on the scraper floor and the feed of the milling unit is activated. The tines of the milling unit tear the straw from the bale and throw it into the hopper. Ideally, the combination of the bale breaker and straw shredder is recommended here.
Technical data of the bale breaker:
Capacity: 1–2 bales per hour, up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill and the kW rating of the straw mill). Without the straw mill, the bale breaker can process up to 900 kg/h of straw.
Max. size of square bales: 2400 x 1200 x 800 mm (L x W x H)
Milling unit motor: 5.5 kW, 380 Volt
Scraper floor feed: 0.75 kW, 380 Volt
Dimensions: 3750 x 1730 x 2460 mm (L x W x H)
Weight: 400 kg
2) Straw Shredder MHZ 600 – 11/15 kW; available immediately
Special price from €6,995 net
Surcharge for the even larger straw shredder (18.5 kW): +€2,750 net
Technical data, MHZ with special hopper:
15 kW 380 Volt electric motor
Diameter: 600 mm
Hardened cutting blades
Screen with interchangeable inserts, optional perforations: (10, 12, 15), 22, 30, 45 mm
With star-delta switch, overload protection, and 8 m connection cable ready to plug in
Discharge nozzle: 160 mm
Blowing distance: approx. 12 m
Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H)
Weight: approx. 240 kg
---
Optional extras at a surcharge:
Feed screw: +€970 net
Cyclone (suspension to be installed by customer)
*Should be installed no more than 10 m away
+€2,970 net
Simple filter: €1,750 net
---
Hodjb Nulhspfx Af Tjn
Further options:
Industrial extraction system (demonstration unit)
+ from €9,950 net
Optional with rotary valve (makes the material pressureless):
+€5,750 net
Control system: from €1,620 net
Special extension for the bale breaker 3 m (other sizes on request)
+€9,750 net
Briquetting press MPP 180 S; lightly used demonstration unit
70 mm briquettes – up to a maximum of 100 kg/h
from €39,700 net
* Larger machines available on request
---
Description:
The muetek bale breaker was developed for breaking up round and square bales of hay and straw. The attached shredder attached to the bale breaker shreds straw from all cereal varieties, hay, maize, and miscanthus. The muetek machines of the MHZ/MHB series stand out due to their robust design and heavy-duty construction.
muetek MHB series bale breakers are equipped with a chain conveyor on which the straw bale is placed using a front loader. The platform is adjustable depending on the bale type.
The chain conveyor pushes the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with multiple teeth that tear apart the straw bale. The straw separated from the bale is expelled.
---
Basically, the machines are suitable for dry feedstocks:
– Straw
– Hay
---
Processing hemp is only possible with a special bale breaker
Surcharge approx. €9,720 net * depending on version.
Shredding hemp is not possible with the straw mill.
Requirements for the feed material:
Moisture content max. 12%
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUF4/3700/60x40
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke
Hedpfsw Ig Suex Af Ten
Izjemno visok pritisk stiskanja: 3.700 kg/cm²
Velik lijak: 600 x 1500 mm
Format briketa: 60 x 40 mm
Zmogljivost:
Aluminijevi ostružki – do 70 kg/h
Jekleni ostružki – do 180 kg/h
Medeninski ostružki – do 220 kg/h
*odvisno od vhodnega materiala in nastavitev
Vključeno:
- Kad za emulzijo
- Črpalka za emulzijo
- Oljni hladilnik
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Neckartailfingen
511 km
Briketirna stiskalnica Briketirna stiskalnica za aluminij
mütekMPP NEM 90
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new
only 704 operating hours
Special price for lightly used demonstration machine
Base machine: €29,990 net
Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
Throughput capacity: up to max. 70 kg/h (material-dependent),
Briquette diameter: Ø 50 mm,
Motor: 5.5 kW,
400 Volt / 50 Hz / 3 phase,
Pump: 40 litres
Max. briquette length: 50 mm,
Optimal briquette length: 40 mm,
Silo diameter: 1,000 mm,
Oil tank: 110 litres
Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg
Hydraulic pre-compaction via slide
Hodpfx Afod N Dnhj Tsn
Main press cylinder
Vertical cylinder
Fill level sensor: yes
Requirements for the input material
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Max. weight on agitator: 150 kg
- The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje stiropora
mütekMSZ 600
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials.
Throughput is highly dependent on screen and input material:
- Up to 60 kg/h with EPS using a 15 mm screen
*The coarser the screen, the higher the throughput.
Motor: 9.2 / 11 kW, 400 Volt
Robust steel construction
Hardened cutting blades
Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations
With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready
Blow-out nozzle 150 mm, optional for plastic or grain pipes
Blowing range approx. 12 m
Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires
Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm
Weight: approx. 240 kg
Spare parts and options:
Hodpfx Afsh S H T Uj Ten
24 hardened blades, each €9.90 (net)
6 bolts, each €14.90 (net)
1 screen €475 (net)
Cover €290 (net)
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje, stiskalnica za briketiranje
RUFRB4/1600/80
Pokliči
Stanje: dober (rabljeno), Tehnični podatki:
Briketirni stroj v dobrem stanju
Letnik: 2007
Tehnični pregled v 06/2025
Cilindrična briketa 80 mm
Hsdpfx Aewtdk Tjf Ton
Pretok do največ 150 kg/h
*le približno 3.949 delovnih ur
- Hidravlična preša: briketirni stroj z izmetno stezo
- Hidravlična enota: 4 kW
- Tlak: maks. 300 bar
- Transportne dimenzije: 1585/2140/H1940 mm
- Teža: 1370 kg
Garancija delovanja ob prevzemu
Z veseljem omogočamo brezplačen preizkus!
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
mütekMRZ 530 ECO - 15 kW
Pokliči
Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530
Included:
+ Profile rotor for increased throughput performance
Options:
Double knife row + €895 net
Veneer and paper stripper + €970 net
* recommended for extremely thin materials with a thickness less than 3 mm
Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation.
We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos.
Machine data:
Motor: 15 kW; 400 V - 50 Hz - 3 ph,
Knives: reversible multiple times,
Rotor diameter: 260 mm,
Control: Siemens S7-1200 PLC,
Hopper (mm): 510 x 810 mm,
Hopper volume approx. 0.4 cbm,
Throughput capacity: 1 – 5 hopper fillings/h,
Hydraulically operated pusher,
Screen perforation as required (10 – 40 mm),
Suction connection Ø 160 mm,
Weight approx. 1,000 kg,
Dimensions approx. 1550 x 1100 x 1640 mm,
Moisture content of raw material: must be below 30% absolutely dry.
Standard features:
• Fast hydraulic system
• Profile rotor
Hodpfsd Db N Isx Af Ton
• Control cabinet with Siemens PLC control
• Automatic star-delta start-up
• Automatic shutdown in case of idling rotor
• Removable extraction chute
• Rotation speed 70 – 100 rpm for higher throughput
• Intermittent control to avoid idle times
• Performance-enhancing step control of the hydraulic pusher
• Stable guides for the hydraulic pusher
Additional shredder options:
- Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net
- Angled conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable 0-60 degrees
Discharge height: approx. 2000 mm
+/- 100 mm
- Overband magnet + €5,980 net
- Synchronised control for conveyor and overband magnet + €2,750 net
(Start and stop synchronised with the shredder)
Requirements for input or raw material:
- Moisture content (absolutely dry) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc., cause increased wear
Olajšamo vam iskanje: "borema umwelttechnik ag drobljenje / stiskalnica za pet plastenke"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec

































































































































































































































