Mizarstvo

Hundegger K2

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Dodatna oprema Uvozna dolžina: 8.270 mm / Maks. dolžina lesa pri vnosu: 16.000 mm / Maks. dolžina lesa pri iznosu: 12.000 mm / Prečni dovajalni transporter s 5 verigami, 2.200 mm / Raztegljiva podporna miza za les / AQF veriga s podaljškom gredi, 2.900 mm / Prečna žaga pod mizo, obračljiva / Ravna zaščitna loputa / Izmet odpadkov navzdol / Upravljanje sistema za odstranjevanje odpadkov / Univerzalna rezkalna enota, 5-osna, s profilnim rezkarjem / Lastovičji rezkar / Orodje za utore / Kombinirani nosilec za vertikalno delujoča orodja / Vrtalna enota, 3,0 kW / Orodje za prsta 1 / Kombinirani nosilec za horizontalno delujoča orodja / Rezkalna enota za utore, 480 mm / Vrtalna enota 1, 2,2 kW / Vrtalna enota 2, 2,2 kW / Označevalna naprava, referenčna stran / Označevalna naprava, upravljavčeva stran / Pnevmatska postaja za obračanje nosilcev / 7-kraka izhodna miza / Podaljšani valjčni transporter, 5.300 mm Ta stroj HUNDEGGER K2-5-450 je bil izdelan leta 2005. Gre za robusten stroj za izdelavo lesenih konstrukcij, ki izstopa pri rezanju, rezkanju, vrtanju in izdelavi utorov za leseno gradnjo. Značilnosti vključujejo 8,27 m dovajalne dolžine, raztegljivo podporo za les in več vrtalnih enot. Idealen je za natančno obdelavo lesenih komponent. Kontaktirajte nas za več informacij o stroju. Kdodoxxnlispfx Af Aow Vrste aplikacij Rezkanje (les)

Stanje: zelo dobro (rabljeno), TECNI-ARMENTIA CH-70 Edger – hydraulic control – programmable cutting width – storage for up to 12 programs – centering feed table TECHNICAL SPECIFICATIONS: maximum cutting width: 700 mm maximum cutting height: 130 mm main motor power: 55 kW maximum material width: 830 mm length of fixed sleeve: 300 mm length of movable sleeve: 100 mm minimum material length: 700 mm spindle diameter: 65 mm sleeve diameter: 85 mm disk diameter: 350 – 400 mm feed speed hydraulically adjustable, stepless maximum feed speed: up to 38 m/min infeed table length: 2700 mm roller width: 700 mm roller diameter: 140 mm centering infeed table 2 lasers pump motor power: 4 kW anti-kickback pawl row Kdedpfx Asidmptjf Aow three upper feed rollers three lower feed rollers hydraulic hold-down hydraulic height adjustment dimensions (L/W/H): 480 / 200 / 230 cm weight: 4000 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12762, največja višina reza: 300 mm, Fully automatic timber infeed Feed roller conveyor Cross conveyor for loading and feeding Under-table swing cut-off saw 11 kW 5-axis universal milling unit - UF5 Combination support for vertically operating tools Drilling unit 2.2 kW - drilling direction vertical Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) - drilling direction horizontal Slotting unit 7.5 kW Rear marking unit (stop side) Fully automatic hydraulic beam turning station Kjdpfx Afexxa Dwe Ajdw Transport and positioning system, two-hand operation Electronic control with Hundegger production software Roller conveyor for timber outfeed with pusher 5-arm wood stacking rack Safety devices and guards Refined machine surface Extension for loading cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit - UF5 Turret milling unit, vertical from above Remote maintenance possible Special arrangement for electrical cabinet Control unit for waste disposal with control buttons Roller conveyor extension 7.10 m, non-driven Height-adjustable and lowering safety impact plate

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, I am selling an automatic CNC processing center for BLOCK-HOUSE production: Hundegger K2i, year of manufacture 2011. Almost like new. Manufactured in 2015. Undertable cross-cut saw with blade size from 750 mm to 800 mm, 360° rotation, servo-hydraulic tilt 0–65° Universal 5-axis unit equipped with round cutter, end mill, and end milling cutter. Cutter head diameter: 350 mm x 100 mm end mill Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece via gripper arms. As the workpiece is measured and transported to the desired position, the gripper arms hold the workpiece as close as possible to the tool for stabilization. The machined material can be rotated automatically. Tolerance +/- 2 mm for lengths up to 13 m Fully automatic timber feed with feed roller conveyor, feed and sliding cross conveyor K2i: Undertable tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support device for vertically operating tools K2i: Boring unit (2.2 kW) – vertical drilling direction K2i: Combination support device for horizontally operating tools K2i: Boring unit (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or user side) K2i: Fully automatic hydraulic panel rotation K2i: Transport and positioning system “two-hand system” K2i: Electrical connection K2i: Roller conveyor for removing wood elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: High-quality machine surface K2i: Extension of K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote maintenance (incl. portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Ideal for timber construction! Available immediately. Kjdoxtxkxspfx Af Aedw

Leto izdelave: 2023, Stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Kodpfoncd Azox Af Aedw Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11441, Trenutno uporabljamo naslednjo verzijo: 9.23.12.102733-12 Kdjdpfx Afjwvih Ao Asw Oprema K2: 4-osni univerzalni rezkalni stroj, 2 vrtalni stojali, spodnja prstasta rezkarica, utorni stroj, hidravlična postaja za obračanje nosilcev. Stroj je popolnoma delujoč in ga je mogoče ogledati po predhodnem dogovoru. Na voljo od 30. 11. 2025. Razstavljanje pri nas v podjetju in nakladanje na tovornjak je vključeno v ceno. Prodaja kot rabljena oprema brez kakršnekoli garancije.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 Kdedpfx Afsu Hmaco Aow 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit non-driven outfeed table machine workshop inspected machine cleaned and newly painted

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, delovna širina: 520 mm, FOR SALE - HUNDEGGER K2 4-Axis – SINGLE OWNER – Operated by the same person since 2002. Kedpexcxptofx Af Ajdw We are reluctantly parting with our first timber framing machine. It is in perfect working order, processing all our daily projects—approximately 500 m³ of timber per year (mainly solid wood, about 90%, and 10% laminated wood). Tooling: > Universal circular saw > Universal 4-axis milling head (2 planing widths: 80 and 35 mm) > Vertical tool holders: 2 drills / 1 vertical milling head with 40/160mm bit > Horizontal tool holders: 1 drill / 1 tilting drill 90-45° / 1 slot mortiser (8x50x480mm shaft) > Side marking unit > Duplicate tooling for immediate operation > Chip extraction pit with conveyor belt > Additional dust extraction guards for fine dust collection Regularly maintained over the years, this machine is ideal for companies specialized in traditional timber construction. Computer system (PC x2 and several DIO 32 input/output cards) replaced in December 2024. Current configuration includes a 5m motorized extension to bypass the planer. Machine demonstrations available during the week. Disassembly to be carried out by buyer, starting from 15.12.2025. SALE PRICE = €50,000 EXCL. VAT

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12431, delovna širina: 625 mm, Oprema: varnostna svetlobna zapora, For sale is a fully automatic Hundegger K2i 625 joinery machine, which is in very good, regularly maintained condition. The machine is still in operation and can be inspected on site by appointment. Availability: from mid-November 2025 Equipment & Technical Details: - Lifting table with 3 t payload - Transfer waiting table with wide chains - Fully automatic timber infeed (roller conveyor, feed & cross conveyor) - Under-table pivoting cross-cut saw (11 kW) - Universal milling unit (5-axis) Kdedpfx Afoxcw Ste Aew - Combination support for vertically operating tools - Vertical finger milling unit (5.5 kW) - Drilling devices vertical & horizontal (2.2 kW / 3.0 kW reinforced) - Marking devices: front, rear, bottom - Hydraulic beam turning station - Two-hand transport and positioning unit incl. machine frame - Control system with EKP software - Roller conveyor with ejector - Safety equipment & guarding - Lifting/lowering cross rollers in the infeed area - Frame extension to 13.56 m - Feed conveyor & roller conveyor for timber lengths up to 13 m - Raw timber holder in front of universal saw - Revolver milling unit (vertical) - Longitudinal & transverse groove milling unit - Slotting device (12.5 kW) - Top-mounted feed roller - Extended roller conveyor with lifting/lowering rollers Maintenance status: - Main & secondary guides renewed (March 2022) - Energy chains with cables renewed (August 2022) - Universal milling head replaced several times - Normal age-related signs of use - All work performed by Hundegger according to maintenance schedule Optionally available: Like-new AL-KO Power Unit 300 P-ZRS Big Bag clean air dust extractor with rotary valve, including Hundegger chip extractor and work platform Surcharge: 54,000 EUR plus VAT Further information: Location & inspection by appointment possible The price quoted is exclusive of VAT

Stanje: nepreverjeno (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 0.48.12.77180, Fully functional Holtec cross-cut saw, year of manufacture approx. 1980 Kdsdot Uhalspfx Af Ajw

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 625 mm, Hundegger joinery line with mechanization 5 axes Working width: 625 mm with tooling Kdedpfx Ajv Ubtcjf Aew

Stanje: dober (rabljeno), Leto izdelave: 2011, Fully automatic wood infeed with feed roller conveyor Extension for cross conveyor and infeed roller conveyor for timber lengths up to 13 m Cross conveyor for loading and feeding Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse groove milling machine Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning system "two-hand operation" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector Kedpfjwuppwjx Af Ajdw 5-arm timber tray Safety devices and perimeter guarding

Stanje: rabljeno, vrsta goriva: dizel, barva: zelen, Leto izdelave: 2015, obratovalne ure: 11.445 h, Leto izdelave: 2015 Modelno leto: 2015 Lastna teža: 32.000 kg Splošno stanje: povprečno Tehnično stanje: dobro Kdodpfx Aot Dlwysf Aow Vizualno stanje: povprečno Cena: na zahtevo Za dodatne informacije se obrnite na Ferdinanda Paterja.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Hundegger K2-5 five-head carpentry center. The machine is in excellent condition after servicing, with no play. Possibility to view it live in operation. Please feel free to contact me. Kedpfxowrd R Ro Af Aedw