Obdelovalni stroj za les / Hundegger K2-4-450

Hundegger K2-4-450

Stanje: dober (rabljeno), Leto izdelave: 2011, Fully automatic wood infeed with feed roller conveyor Extension for cross conveyor and infeed roller conveyor for timber lengths up to 13 m Cross conveyor for loading and feeding Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Fsdpfxjwuppws Abvjpd Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse groove milling machine Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning system "two-hand operation" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm timber tray Safety devices and perimeter guarding

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw Fodpfx Ajwclkyobvjpd - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, Fpodpfevwfqqjx Abvjd without guarantee or warranty

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. Fedpfx Abswd N Rmevopd • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Hydraulic milling head. Fjdpotuyr Ijfx Abvspd 22 kW motor. The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Stanje: dober (rabljeno), Renault 270 DCI crane truck, 19 tonnes, Year: 2002, 470,000 km. Engine replaced with factory exchange unit at 250,000 km. Crane capacity: 5.5 tonnes. Technical inspection: passed. No remote control for the crane. Fedsrhzy Hopfx Abvspd

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, LINEARNI PET PUHALNI STROJ Z DODATNO OPREMO AC ARCOR - multiBlow2 - 2017 Hitrost: 1,5L - 6000 Votlini: 4 Formati: 0,1 - 3,0L DODATNA OPREMA 1. Hladilnik - M.T.A S.p.A - TAE EVO 051 2. Kompresor z nizkim tlakom - SHAMAL 45kW Fpjdpoquuvrjfx Abvjd 3. Kompresor z visokim tlakom - KAESER Booster N 753 - G 13 bar / 40 bar 4. Sušilnik zraka 5. Tlačna posoda - nizek tlak - MAX 16Bar 6. Tlačna posoda - visok tlak - MAX 45Bar

Leto izdelave: 2023, stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Fsdpfx Aencd Azsbvepd Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: rabljeno, Leto izdelave: 1992, maks. širina reza: 5300 mm, maks. višina reza: 2200 mm, premer žaginega lista: 300 mm, maks. debelina obdelave: 80 mm, odprtina žaginega lista: 30 mm, spodnja podpora: togi valji, nagib žagine glave: ročno, podajanje žage: avtomatsko, odsesavanje: zunanje odsesavanje, teža cca.: 1500 kg, moč motorja: 5,5 kW Lokacija skladišča: Nattheim Fjdpfxevvkq Te Abvopd

Stanje: dober (rabljeno), WD frame saw type GXW 71, equipped with spherical roller bearings on the main shaft. Suitable for all base plates of GXV and GXW frame saws. Fully hydraulic. Includes hydraulic saw blade tensioner. Ideal as a replacement frame saw or for flywheel exchange. Fjdpjuql Iljfx Abvopd