Mizarstvo

Hundegger K2

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Dodatna oprema Uvozna dolžina: 8.270 mm / Maks. dolžina lesa pri vnosu: 16.000 mm / Maks. dolžina lesa pri iznosu: 12.000 mm / Prečni dovajalni transporter s 5 verigami, 2.200 mm / Raztegljiva podporna miza za les / AQF veriga s podaljškom gredi, 2.900 mm / Prečna žaga pod mizo, obračljiva / Ravna zaščitna loputa / Izmet odpadkov navzdol / Upravljanje sistema za odstranjevanje odpadkov / Univerzalna rezkalna enota, 5-osna, s profilnim rezkarjem / Lastovičji rezkar / Orodje za utore / Kombinirani nosilec za vertikalno delujoča orodja / Vrtalna enota, 3,0 kW / Orodje za prsta 1 / Kombinirani nosilec za horizontalno delujoča orodja / Rezkalna enota za utore, 480 mm / Vrtalna enota 1, 2,2 kW / Vrtalna enota 2, 2,2 kW / Označevalna naprava, referenčna stran / Označevalna naprava, upravljavčeva stran / Pnevmatska postaja za obračanje nosilcev / 7-kraka izhodna miza / Podaljšani valjčni transporter, 5.300 mm Ta stroj HUNDEGGER K2-5-450 je bil izdelan leta 2005. Gre za robusten stroj za izdelavo lesenih konstrukcij, ki izstopa pri rezanju, rezkanju, vrtanju in izdelavi utorov za leseno gradnjo. Značilnosti vključujejo 8,27 m dovajalne dolžine, raztegljivo podporo za les in več vrtalnih enot. Idealen je za natančno obdelavo lesenih komponent. Kontaktirajte nas za več informacij o stroju. Ndedpfoxxnliox Ac Nsd Vrste aplikacij Rezkanje (les)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna masa: 24.000 kg, Prodajam tesarsko obdelovalno središče Hundegger K2i, letnik 2008. Stroj je v zelo dobrem stanju in zelo dobro opremljen, med drugim vključuje: - Dovajalna miza 13 m - Nosilci za nosilce z verižnim pogonom - 5-osna žagalna enota - 5-osna rezkalna enota - Vrtanje vodoravno in navpično - Dodatna rezkalna enota za obdelavo spodnjih koncev špirovcev - Utoreznica s kompletom verig 8 in 10 mm Pozor! Utoreznica je redka oprema, ki se uporablja pri izdelavi veznih nosilcev s skritimi pločevinami – zelo uporaben pripomoček. Možna je namestitev stroja – z izkušnjami že imamo, omogočimo tudi zagon. Poleg tega lahko ponudimo tudi uvajanje, torej programsko opremo, izobraževanje in montažo. Nsdjxx T Rdopfx Ac Nsdd Stroj je v zelo dobrem tehničnem stanju, redno vzdrževan in neprekinjeno v uporabi. Prodajamo ga, ker smo kupili veliko novejšega. Pozor, možen prevzem v marcu!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12762, največja višina reza: 300 mm, Fully automatic timber infeed Feed roller conveyor Cross conveyor for loading and feeding Under-table swing cut-off saw 11 kW 5-axis universal milling unit - UF5 Combination support for vertically operating tools Drilling unit 2.2 kW - drilling direction vertical Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) - drilling direction horizontal Slotting unit 7.5 kW Rear marking unit (stop side) Fully automatic hydraulic beam turning station Transport and positioning system, two-hand operation Electronic control with Hundegger production software Roller conveyor for timber outfeed with pusher 5-arm wood stacking rack Safety devices and guards Refined machine surface Extension for loading cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit - UF5 Turret milling unit, vertical from above Remote maintenance possible Special arrangement for electrical cabinet Control unit for waste disposal with control buttons Nedpfx Aoxxa Dwoc Nsdd Roller conveyor extension 7.10 m, non-driven Height-adjustable and lowering safety impact plate

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11174, We are selling our used Hundegger fully automatic joinery machine, Type K2, year of manufacture 2001: - Infeed and loading cross conveyor (6-strand) - Underslung pivoting crosscut saw - Universal milling unit (UF4) - Combined support for vertically operating tools - 2.2 kW drilling unit - vertical Ndsdpfexvychex Ac Nsd - 3 kW drilling unit - vertical - 7.5 kW vertical finger milling unit - Combined support for horizontally operating tools - 2.2 kW drilling unit - 2.2 kW drilling unit – horizontally swivelling - Slotting unit - Rear marking unit - Bottom marking and labeling unit - Fully automatic beam turning station - Dovetail milling cutter - Transport and positioning system "two-hand operation" - Electronic control system - Extension roller conveyor 5.30 m - 6-arm stacking table - Height-adjustable safety impact plate - Extension of the infeed conveyor with wood feeder, 13 m - Tooling equipment - Etc. For further details, see photos and on request. The machine is fully operational and can be inspected by appointment. Available from spring 2026. All documentation present, regularly serviced by Hundegger, sold as-is without refurbishment. Dismantling and collection to be carried out by the buyer. Sale is as a used machine, with exclusion of any warranty or guarantee.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, I am selling an automatic CNC processing center for BLOCK-HOUSE production: Hundegger K2i, year of manufacture 2011. Almost like new. Manufactured in 2015. Undertable cross-cut saw with blade size from 750 mm to 800 mm, 360° rotation, servo-hydraulic tilt 0–65° Universal 5-axis unit equipped with round cutter, end mill, and end milling cutter. Cutter head diameter: 350 mm x 100 mm end mill Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece via gripper arms. As the workpiece is measured and transported to the desired position, the gripper arms hold the workpiece as close as possible to the tool for stabilization. The machined material can be rotated automatically. Tolerance +/- 2 mm for lengths up to 13 m Fully automatic timber feed with feed roller conveyor, feed and sliding cross conveyor K2i: Undertable tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support device for vertically operating tools K2i: Boring unit (2.2 kW) – vertical drilling direction Nodpfx Asxtxkxsc Nedd K2i: Combination support device for horizontally operating tools K2i: Boring unit (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or user side) K2i: Fully automatic hydraulic panel rotation K2i: Transport and positioning system “two-hand system” K2i: Electrical connection K2i: Roller conveyor for removing wood elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: High-quality machine surface K2i: Extension of K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote maintenance (incl. portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Ideal for timber construction! Available immediately.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11441, Trenutno uporabljamo naslednjo verzijo: 9.23.12.102733-12 Nedpfowvih Ajx Ac Nsdd Oprema K2: 4-osni univerzalni rezkalni stroj, 2 vrtalni stojali, spodnja prstasta rezkarica, utorni stroj, hidravlična postaja za obračanje nosilcev. Stroj je popolnoma delujoč in ga je mogoče ogledati po predhodnem dogovoru. Na voljo od 30. 11. 2025. Razstavljanje pri nas v podjetju in nakladanje na tovornjak je vključeno v ceno. Prodaja kot rabljena oprema brez kakršnekoli garancije.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12431, delovna širina: 625 mm, Oprema: varnostna svetlobna zapora, For sale is a fully automatic Hundegger K2i 625 joinery machine, which is in very good, regularly maintained condition. The machine is still in operation and can be inspected on site by appointment. Availability: from mid-November 2025 Equipment & Technical Details: - Lifting table with 3 t payload - Transfer waiting table with wide chains - Fully automatic timber infeed (roller conveyor, feed & cross conveyor) - Under-table pivoting cross-cut saw (11 kW) - Universal milling unit (5-axis) - Combination support for vertically operating tools - Vertical finger milling unit (5.5 kW) - Drilling devices vertical & horizontal (2.2 kW / 3.0 kW reinforced) - Marking devices: front, rear, bottom - Hydraulic beam turning station - Two-hand transport and positioning unit incl. machine frame - Control system with EKP software - Roller conveyor with ejector - Safety equipment & guarding - Lifting/lowering cross rollers in the infeed area - Frame extension to 13.56 m - Feed conveyor & roller conveyor for timber lengths up to 13 m - Raw timber holder in front of universal saw - Revolver milling unit (vertical) - Longitudinal & transverse groove milling unit - Slotting device (12.5 kW) - Top-mounted feed roller - Extended roller conveyor with lifting/lowering rollers Maintenance status: - Main & secondary guides renewed (March 2022) - Energy chains with cables renewed (August 2022) - Universal milling head replaced several times - Normal age-related signs of use - All work performed by Hundegger according to maintenance schedule Optionally available: Like-new AL-KO Power Unit 300 P-ZRS Big Bag clean air dust extractor with rotary valve, including Hundegger chip extractor and work platform Surcharge: 54,000 EUR plus VAT Further information: Location & inspection by appointment possible The price quoted is exclusive of VAT Njdpfxoxcw Sto Ac Nsdd

Stanje: dober (rabljeno), Leto izdelave: 2011, Fully automatic wood infeed with feed roller conveyor Extension for cross conveyor and infeed roller conveyor for timber lengths up to 13 m Njdpfowuppwex Ac Nsdd Cross conveyor for loading and feeding Under-table swing crosscut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse groove milling machine Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning system "two-hand operation" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm timber tray Safety devices and perimeter guarding

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Hundegger K2-5 five-head carpentry center. The machine is in excellent condition after servicing, with no play. Possibility to view it live in operation. Please feel free to contact me. Ndodpfx Aewrd R Rjc Nod

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11470, širina obdelovanca (maks.): 450 mm, Hundegger K2 in very good condition, overhauled, assembled, and commissioned by Hundegger. Since then, it has only run for approximately 20 hours and has been professionally dismantled and stored in a heated hall. Njdpfx Ajwhpavjc Nsdd