Stroj za obdelavo lesa

Hundegger K2 450

Stanje: rabljeno, Leto izdelave: 2006, Stroj za obdelavo lesa Proizvajalec: Hundegger Tip: K2-4-450 Letnik: 2006 Tehnični podatki - Največja dolžina lesa za obdelavo: 13 m - Največja dolžina lesa za odlaganje: 12 m - Barva: RAL 5012, modra - Prestavljalnik za podajanje lesa, 5 valjev, vodoravno, 2,2 m s ploščato verigo - Podajalni valj z valjasto podaljškom - Podaljšek z vlačilcem - Krožna žaga, ki se vrti pod mizo - Univerzalni rezkalnik, 4-osni, UF4 Lhjdozzcx Aepfx Af Sol - Valjčni rezkalnik - Prstni rezkalnik - Rezkalnik za golobe repove - Kombiniran nosilec za navpično delujoča orodja - Vrtalni stroj, 2,2 kW - Vrtalni stroj, 3,0 kW, močnejši - Kombiniran nosilec za vodoravno delujoča orodja - Vrtalni stroj, 2,2 kW - Stroj za utore - Označevalni stroj - Odlagalna miza, 6-ročna - Popolnoma avtomatska postaja za obračanje tramov, pnevmatska - Izboljšane površine za podpiranje lesa - Tiskalnik etiket Opomba: Tehnični podatki in opisi so prepis prvotne potrditve naročila. Podatki so namenjeni informiranju in niso zavezujoči.

Stanje: rabljeno, Jeklena konstrukcija za dvigalne naprave Širina: približno 8,5 m Dolžina: približno 7,95 m Naprava je razstavljena Naprava se prodaja »kot je«. Ogled: Vabimo vas, da si ogledate izdelek – preprosto nas kontaktirajte in se dogovorite za termin. Pozor: brez garancije, brez možnosti vračila ali zamenjave. Lhsdsbruzgepfx Af Ssl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 450 mm, delovna dolžina: 16.000 mm, delovna širina: 450 mm, Oprema: varnostna svetlobna zapora, For sale is a well-maintained Hundegger K2 joinery line with planing machine. The system is fully functional and has been serviced several times a year by Hundegger. The machine will remain in operation until early November and can then be dismantled by the buyer. = Equipment: = Machine type K2-5-450 - Maximum wood length intake and outfeed: 16 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m, with flat link chains - Extendable timber unloading platform - Underslung swivel cross-cut saw - 5-axis universal milling unit UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically-operating tools (finger cutter, drill unit 2.2 kW) - Combination support for horizontally-operating tools (drill unit 2.2 kW, drill unit 2.2 kW) - Front marking unit - 6-arm discharge table - Hydraulic beam turning station - Refined timber contact surfaces (the susceptible plastic coating replaced by maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - 10 m extension roller conveyor with feed roller - Outfeed cross conveyor: 7 strands, 3.5 m, with flat link chain - Planing machine interface: HMD = Planing machine - HM-D Lhodpfszb I Iwex Af Sel - Fully automatic four-sided planing and chamfering - Planing motors 7 kW - Automatic thickness planing adjustment - Direct planing control - Planer directly integrated downstream of the joinery machine = Miscellaneous - Viewing possible at any time by appointment. - If in operation, an inspection during production is possible. - A new K2 with planing machine and comparable equipment costs around €800,000. - New spare parts in stock can be included at a favourable price. - Machine runs perfectly, however, no warranty or liability will be assumed for future damages. - Ideal machine for medium to large-sized timber construction businesses or sawmills. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - For questions, please call Monday to Friday from 7:00 to 12:00 and from 13:00 to 17:00, or by email anytime. - Unfortunately, I could not provide a mobile number, otherwise the ad would be blocked.

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 11197, Hundegger K2-450 Joinery Machine – Year of Manufacture 2000 For sale is a used Hundegger K2-450 joinery machine, year 2000, currently in operation. The machine has been used for the processing of timber components in timber frame and wooden house construction and is currently located at Norges Hus Nova OÜ in Perila, Estonia. The machine can be inspected under power by appointment. Technical Data: Manufacturer: Hundegger Model: K2-450 Year of manufacture: 2000 Machine no.: 11197 Lodpfx Aozbnkfof Sehl Condition: Used Location: Kuivati tee 10, Perila, Harju County, Estonia Equipment / Notes: - Complete infeed and outfeed system available - Machine was used in production up to the last day - Sale due to modernization or reorganization of production - Dismantling and loading by arrangement - On-site inspection is explicitly encouraged This machine is ideally suited for carpentry shops, timber construction companies, and operations in the joinery sector seeking a proven and robust Hundegger system. For further information, technical details, additional photos or to arrange an inspection appointment, please do not hesitate to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 140 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 3.050 mm, dolžina pomika po osi Y: 1.250 mm, dolžina podajanja os Z: 80 mm, vhodna frekvenca: 50 Hz, vhodni tok: 29 A, delovna širina: 3.050 mm, Wir bieten diese sehr gute HOMAG DRILLTEQ V-500 Durchlaufbohrmaschine, Baujahr 2021, an. Lhjdpfoylp Sljx Af Sol Arbeitsbereich X: 3.050 mm Arbeitsbereich Y: 1.250 mm Arbeitsbereich Z: 80 mm Anzahl Frässpindeln: 1 Hauptmotorleistung: 10 kW Maximale Drehzahl: 24.000 U/min Werkzeugspannsystem: HSK-F63 Werkzeugwechsler-Positionen: 4 Vertikale Bohrspindeln: 15 Horizontale Bohrspindeln in X: 6 Horizontale Bohrspindeln in Y: 4 Nutschneidaggregat: um 90° schwenkbar Vertikale Arbeitsfläche: Maschinentisch Durchlauftechnik: Spezielle Werkstück-Spanntechnik Klemmgreifer Barcodeleser Sicherheitseinrichtung: Geschlossene Schutzeinhausung Steuerung: Homag powerTouch, HOMAG POWER CONTROL Software: HOMAG WOODWOP 7.2 Konformitätskennzeichnung: CE-Kennzeichnung Kategorie: Bearbeitungszentrum Typenbezeichnung: DRILLTEQ V-500 Untertyp: OPTIMAT BHX200 Maschinennummer: 0-250-73-7195 Schaltplan: 0-250-73-7195 Versorgungsspannung: 400Y/230 V Neutralleiter: vorhanden Phasen: 3 Frequenz: 50 Hz Maximaler Betriebs-Nennstrom: 29 A Absicherung: 35 A Steuerspannung: 24 V Bei Fragen oder für weitere Informationen senden Sie uns gerne eine Nachricht oder rufen Sie uns an.

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.800 mm, vhodna napetost: 400 V, skupna širina: 2.830 mm, skupna dolžina: 2.300 mm, skupna masa: 2.500 kg, delovna širina: 1.950 mm, obratovalni tlak: 6 letvica, Oprema: dokumentacija / priročnik, Kolbus Autobox BX200 z magazinskim podajalnikom Stroj za izdelavo škatel za proizvodnjo individualnih zloženk iz valovite lepenke Magazinski podajalnik za avtomatsko podajanje Avtomatska nastavitev preko zaslona na dotik Lhjdpfsyaa Rnsx Af Sel Obdelava valovite lepenke do max. 10 mm Širina režnega noža: 7 mm Možnost oddaljenega servisa DEMO stroj – KOT NOV!!!

Stanje: dober (rabljeno), Leto izdelave: 2000, delovna širina: 900 mm, skupna širina: 1.800 mm, skupna dolžina: 12.000 mm, skupna višina: 3.550 mm, skupna masa: 8.000 kg, À vendre : Ligne de production de pain Konig Kombi 8/7/6/4 rangées Comprend : - Trémie à pâte TRO 240 avec système d'huile - Tête de ligne Konig Industrie Rex modèle A - Bandes d'écartement - Armoire de fermentation modèle : KGV V L Type : (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Unité de frappe - Rouleuse longue - Station de graines - Table de dépose (8/7/6/4) (4 tables de dépose avec différentes bandes incluses) - Chariot de stockage pour tables de dépose - Chariot de stockage pour épandeurs de farine - Pièces de rechange - Coffret d'alimentation - Tous les documents et schémas électriques Plage de poids : de 20 à 30 g jusqu'à 110 g Rendement : 18 000 / 24 000 pcs par heure Largeur de travail : 900 mm Nouveau tambour dans le Industrie Rex De nombreuses pièces de rechange telles que bandes d'écartement, etc. Il est possible d'inspecter la ligne sur site. Nous pouvons soigneusement charger la ligne dans un camion/conteneur. Vous avez des questions ou remarques ? N'hésitez pas à nous contacter. Lodpfsxnb Iiex Af Sshl Cordialement, Leo Holland

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Lhsdpfx Afsfi Tg Ho Sjl Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Balz BG 90 z vstopnim vlečnim blokom Še vedno v uporabi Minimalni premer debla: 140 mm Lsdpfx Aeygli Nsf Sehl Maksimalni premer debla: 900 mm Najkrajša dolžina lesa: 2000 mm Hitrost podajanja: 10 ali 16 m/min Rotor s 5 noži

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents. Lhodpjx Sxfvsfx Af Ssl