Mizarstvo

Hundegger K2-Industry

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, For sale: 4 Weinmann butterfly tables, each measuring 10.5 meters in length and 3.2 meters in width. Weinmann multifunction bridge WMS150 equipped with 3 tool holders, a saw, and a milling unit. Ksdpfow D Upujx Af Ajdw

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw Kjdewclkyepfx Af Aodw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina mize: 300 mm, višina reza z zareznim rezilom (max.): 100 mm, dolžina vretena za rezkanje: 250 mm, Equipment: Kjdpfx Afowz H Ane Aedw 1 GRECON feed transfer system with accumulation of 4 to 5 cleared laths of varying lengths for finger jointing 1 GRECON double-end finger jointing machine for deep notches (suitable for glued laminated timber beams) 1 180° transfer unit with two-component gluing system 1 GRECON finger jointing press 1 CNC-controlled cross-cut saw 1 outfeed table

Leto izdelave: 2023, Stanje: rabljeno, Used machine Year of manufacture: 2023, delivered in 2024 Kdodpfx Ajxavtkof Aow Condition: As new, machine is in its original packaging and has not been commissioned Equipment and Technical Data: Feed Table / Cross Conveyor: - Number of strands: 6 × supergrip toothed belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: geared motor, 1.5 kW - Min. workpiece feed length: 0.8 m - Function: automatic transfer of raw material by lowering the level onto the infeed table Infeed Table: - Smooth sliding table with slide plastic for gentle feeding of raw material by servo pusher into the processing zone - Support width: approx. 200 mm Blockhaus 4F-SERVO (Main Milling Unit): - Processing dimensions: 140 × 200 mm - Horizontal milling depth top: max. 60 mm - Horizontal milling depth bottom: max. 35 mm - Vertical milling depth: max. 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical by SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle, digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: subfloor extraction funnel Ø 160 mm (pit required on site) - Control: IPC / PLC / IITO software - Machine base with preparation for end groove or dovetail milling, drilling unit, and crosscut saw - Machine housing: enclosed, with swiveling safety hood (gas strut, viewing window) - Electrical cabinet on base, cable tract 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Controlled via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - Individual grooves and millings on all four sides - Recesses and markings for window and door openings - Double and triple connections - Half corner connections (e.g. for upper and lower wall logs) Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end groove cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination Mill End Groove & Dovetail: - 3-axis milling head for machining end grooves and dovetail joints - End groove cutter Ø 240 mm × width 30 mm - Milling depth end groove max.: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y-axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z-axis): SERVODRIVE - Rotary adjustment (DT.R-axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum plank thickness for longitudinal joint: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z-axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12431, delovna širina: 625 mm, Oprema: varnostna svetlobna zapora, For sale is a fully automatic Hundegger K2i 625 joinery machine, which is in very good, regularly maintained condition. The machine is still in operation and can be inspected on site by appointment. Availability: from mid-November 2025 Equipment & Technical Details: - Lifting table with 3 t payload - Transfer waiting table with wide chains - Fully automatic timber infeed (roller conveyor, feed & cross conveyor) - Under-table pivoting cross-cut saw (11 kW) - Universal milling unit (5-axis) - Combination support for vertically operating tools - Vertical finger milling unit (5.5 kW) - Drilling devices vertical & horizontal (2.2 kW / 3.0 kW reinforced) - Marking devices: front, rear, bottom - Hydraulic beam turning station - Two-hand transport and positioning unit incl. machine frame - Control system with EKP software - Roller conveyor with ejector - Safety equipment & guarding - Lifting/lowering cross rollers in the infeed area - Frame extension to 13.56 m - Feed conveyor & roller conveyor for timber lengths up to 13 m - Raw timber holder in front of universal saw - Revolver milling unit (vertical) - Longitudinal & transverse groove milling unit - Slotting device (12.5 kW) - Top-mounted feed roller - Extended roller conveyor with lifting/lowering rollers Maintenance status: - Main & secondary guides renewed (March 2022) - Energy chains with cables renewed (August 2022) - Universal milling head replaced several times - Normal age-related signs of use Kdjdpfoxcw Stex Af Aew - All work performed by Hundegger according to maintenance schedule Optionally available: Like-new AL-KO Power Unit 300 P-ZRS Big Bag clean air dust extractor with rotary valve, including Hundegger chip extractor and work platform Surcharge: 54,000 EUR plus VAT Further information: Location & inspection by appointment possible The price quoted is exclusive of VAT

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Hundegger K2-5 five-head carpentry center. The machine is in excellent condition after servicing, with no play. Possibility to view it live in operation. Please feel free to contact me. Kodpfxswrd R Re Af Aodw

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Razpon vpenjanja: maks. 240 mm Kedpjw Npk Aofx Af Aedw Višina reza: maks. 450 mm Globina reza: maks. 380 mm Moč motorja: 2,2 kW

Stanje: dober (rabljeno), Leto izdelave: 2005, I am selling the four-side planer FUTURA PRG24/7, year of manufacture 2005. Maximum workpiece size: 260 x 150 mm! 7-spindle configuration: - Bottom: 7.5 kW (10 HP) / 6000 rpm - Right: 7.5 kW (10 HP) / 6000 rpm - Left: 7.5 kW (10 HP) / 6000 rpm - Top: 7.5 kW (10 HP) / 6000 rpm - Top: 6.75 kW (9 HP) / 6000 rpm - Right: 6.75 kW (9 HP) / 6000 rpm Kdedshrw Nhspfx Af Asw - Universal: 7.5 kW (10 HP) / 6000 rpm Total power: 62 kW / 102 A Total weight: 4500 kg Maximum workpiece size: 260 x 150 mm! Including 2 FABA planing heads with spiral knives, Ø140 x 260 x 40 mm. Electronic programming for working width, working height, and pressure zone height Feed speed adjustable via inverter. 2-zone pneumatic pressure system for feed rollers Available immediately.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, obratovalne ure: 0 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00000000001, Approx. 18m long Already dismantled Kdjdpfx Aovrv Tref Aow On-site loading possible Fully functional

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, I am selling an automatic CNC processing center for BLOCK-HOUSE production: Hundegger K2i, year of manufacture 2011. Almost like new. Manufactured in 2015. Undertable cross-cut saw with blade size from 750 mm to 800 mm, 360° rotation, servo-hydraulic tilt 0–65° Universal 5-axis unit equipped with round cutter, end mill, and end milling cutter. Cutter head diameter: 350 mm x 100 mm end mill Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece via gripper arms. As the workpiece is measured and transported to the desired position, the gripper arms hold the workpiece as close as possible to the tool for stabilization. The machined material can be rotated automatically. Tolerance +/- 2 mm for lengths up to 13 m Fully automatic timber feed with feed roller conveyor, feed and sliding cross conveyor Kjdpfx Aoxtxkxjf Ajdw K2i: Undertable tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support device for vertically operating tools K2i: Boring unit (2.2 kW) – vertical drilling direction K2i: Combination support device for horizontally operating tools K2i: Boring unit (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or user side) K2i: Fully automatic hydraulic panel rotation K2i: Transport and positioning system “two-hand system” K2i: Electrical connection K2i: Roller conveyor for removing wood elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: High-quality machine surface K2i: Extension of K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote maintenance (incl. portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Ideal for timber construction! Available immediately.