Auertec stroj za rezkanje brunaric

Auertech BL100A

New machine

Year of manufacture: 2023

Delivered in 2024; original packaging, never used

Features and technical data:

Infeed Table – Transversal Conveyor
Number of strands: 6x with Supergrip timing belts
Pitch: 650 / 650 / 850 / 1500 / 1500mm
Length: approx. 1.8m
Drive: geared motor, 1.5kW
Minimum workpiece infeed length: 0.8m
The raw material (laminated beams) is manually placed onto the transversal conveyor by the operator. The conveyor automatically transfers the workpieces to the infeed table via height lowering.

Infeed Table
Smooth sliding table with low-friction plastic inserts, allowing gentle, damage-free transfer of the raw material into the processing zone by the servo pusher.
Support width: approx. 200mm

1 pc. Log House 4F-SERVO
Main milling unit for producing log house corner joints by machining all four sides of the beam in a single clamping. Processing is carried out by two milling tools from the rear and two from below, each guided on horizontal and vertical feed supports.
Processing dimensions: 140 x 200mm
Milling depths:
- Horizontal top: max. 60mm
- Horizontal bottom: max. 35mm
Fedpfxsxavtko Ah Degh
- Vertical: max. 95mm
Cutter spindle diameter: 30mm
Milling cutter size, max.:
- Horizontal: 2x D=220 x W=120mm
- Vertical: 2x D=280 x W=120mm
Motor rating: 4 x 4.0kW

Feed speed horizontal & vertical: SERVODRIVE, infinitely variable via software operation; automatic with IPC control / manual via two-hand pushbuttons
Milling depth adjustment: spindle, digital counter
Workpiece clamping:
- Vertical: pneumatic
- Horizontal: pneumatic
Extraction: underfloor hopper Ø160mm (pit required on site)
Complete with electrical system, PLC control, and pneumatics. Machine frame prepared for installation of end tenon or dovetail mill, boring device, and cross-cut saw. Enclosed machine guard with lift-up safety hood (gas shock absorber) and inspection window. Electric control cabinet on base with 3.0m cable duct. – Ready for operation, without tools.

1 pc. Option i – automatic milling depth adjustment for 4F milling unit
The system comprises 4 additional NC-controlled SERVO axes for the automatic positioning of the 4F tool milling depths. All settings and parameter inputs are made directly via the IITO Control software. Full-axis control enables numerous further machining options:
- Individual slots and milling on all four component sides
- Cut-outs or markings for window and door openings
- Individual double milling on component sides
- Individual triple joints
- Half corner joints for upper and lower wall beams or for beam layers
Control: automatic via IPC/PLC/IITO software
Milling depth adjustment: SERVODRIVE
Tolerance: +/- 0.1mm

2 pcs. 4-part grooving cutter D220; 21–90mm; LM for 4-sided horizontal milling
Wall thickness: +/- 28-100mm
Dimension: Ø220/30
Adjustable width: 21.0 - 90mm
Design: Z=3; V=3; LM / HM-WEPLA 15x15x2.5

2 pcs. 4-part grooving cutter D280; 21–90mm; LM for 4-sided vertical milling
Wall thickness: +/- 28-100mm
Dimension: Ø280/30
Adjustable width: 21.0 - 90mm
Design: Z=3; V=3; LM / HM-WEPLA 15x15x2.5

1 pc. Combination Mill for End Tenon & Dovetail
3-axis controlled milling unit with a combination...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.